Kipas rotor sekrup kincir angin knalpot

Tahun pembuatan: 2022, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Lauber wood dryer with longitudinal ventilation Chamber with stack wagon Net volume: 7.2 m³ with wood temperature sensor -> new / unused / original packaging Lsdpfjmidtrex Aahoak -> immediately available (standard delivery time approx. 3/4 year) -> see detailed description in photos -> Collection, loading, etc. by buyer -> Transport, customs clearance, and insurance to be arranged by the buyer

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE Laodjncd Azepfx Aahsk

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar potong di pagar rip: 1.300 mm, ketinggian potong (maks.): 204 mm, diameter utama gergaji: 550 mm, jenis penyesuaian ketinggian: listrik, tinggi meja: 910 mm, panjang luncuran: 3.200 mm, daya: 5,5 kW (7,48 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, rem mesin, Altendorf F45 EvoDrive Year of manufacture: 2023, New machine - Template holder at terminal - Increased cutting height, saw blade up to 550 mm, cutting height 204 mm - Motor 5.5 kW (7.5 HP) VARIO (stepless speed control) - Preparation for 2-axis scoring unit Lasdpevw S Hfsfx Aahok - Table extension 840 mm - Double roller carriage length 3200 mm - Mitre fence - CNC rip fence 1300 mm - Front support roller

Kondisi: baru, Tahun pembuatan: 2025, Roll diameter: 800 mm Maximum cutting height: 400 mm Fixed worktable: 1290 x 800 mm Maximum saw blade width: 54 x 0.9 mm Maximum and minimum blade length: 5530 / 5380 mm Motor power: 15 kW (20 HP) Extraction hoods: No. 2 Ø 120 mm, No. 1 Ø 100 mm Compressed air consumption (wheel braking and feed unit roller opening): 6 bar Net weight: 880 kg Resawing unit Feed conveyor height: 300 mm Conveyor stop length: 750 mm Lodpfoglfv Djx Aaheak Roll diameter: 160 mm Maximum roller opening from blade: 200 mm Maximum stop opening from blade: 200 mm Infinitely variable feed speed: 0–30 m/min

Tahun pembuatan: 1988, Kondisi: hampir baru (bekas), de Ljdpedx Elmofx Aahoak

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, DROZDOWSKI PRP 58 FRAME SAWMILL complete with equipment: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Blade setter The machine has undergone a complete overhaul at the manufacturer’s facility – in excellent, like-new condition. Technical specifications: Horizontal clearance of saw frame: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft rotational speed: 330 rpm Feed rate: 0.5 – 2.5 m/min Saw blade dimensions (length × width × thickness): 815 × 70 × 1.6 mm Maximum number of blades: 12 pcs Lajdpfx Aasxawddehok Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum log length: 1.8 m Minimum board thickness: 13 mm (standard), 9 mm (with single blade installation) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Machine overall dimensions (L × W × H): 1.20 × 1.70 × 2.10 m Total length of assembly with track: 10.00 m Weight with standard equipment: 3,500 kg

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: GUS 71 Typ 26.813, Frame saw by Wusterer & Dietz including: - Frame saw - Saw blade tensioner - Splitting wedge - Frame roller conveyor - 4-strand drag chain Lsdpfxov Ummbs Aahjak Inspection possible by appointment.

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Lasdpfx Aaov Si Szjhok Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm – max. 100 mm Laodpstykw Sofx Aahek - Feed rate: 5–30 m/min, infinitely variable - Roller conveyor included The condition is as new. If interested, the machine can be tested on site. If you have any questions, please feel free to contact us.

Kondisi: baru, The new Holzprofi Maker cylinder brush and sanding machine can be converted from a sanding machine to a brushing machine in just a few seconds, quickly and easily. This versatile unit is ideal for smaller workshops, as it combines two machines in one. Benefits and Features: - Versatile options for surface treatment - Fast and easy conversion from sanding to brushing - Wide choice of brushes available for diverse effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results Laedpfxewzzivs Aahek - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Extension table dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Dust extraction port: Ø100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Optional Accessories: - Structuring brush for even and textured surfaces - Sanding flap brush for finishing and surface preparation - Steel wire brush for a used-look finish and a pronounced grain effect