Keburukan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 630 mm, diameter penggilingan: 320 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Hedpfsyvf S Nsx Abxsk DETAIL TEKNIS Panjang penggilingan maks.: 630 mm Diameter penggilingan maks.: 320 mm DETAIL MESIN Pabrikan: TOS HOSTIVAR Model: BHU 32 Tahun pembuatan: 1987

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, diameter pembubutan: 500 mm, kecepatan spindel (maks.): 3.000 rpm, gores kuas bulu: 150 mm, model controller: Siemens 802 C, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Diameter putar: 500 mm Diameter putar di atas dudukan: 280 mm Panjang putar: 1.500 mm Jarak gerak sumbu X: 295 mm Jarak gerak sumbu Z: 1.435 mm Lubang spindle: 82 mm Kecepatan spindle: 20 - 3.000 rpm Feed melintang: 5.000 mm/menit Feed plans: 5.000 mm/menit Gerakan cepat melintang: 5 m/menit Gerakan cepat plans: 5 m/menit Jarak gerak pinol: 150 mm Lebar alas: 350 mm Hsdpfxsyuymfe Abxek DETAIL MESIN Kontrol: Siemens 802 C Motor utama: 7,5 kW Dimensi & Berat Ruang yang dibutuhkan: ca. 3,23 x 1,47 x 1,73 m Berat mesin: ca. 3 t

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, kecepatan pemakanan sumbu X: 25 m/menit, tinggi benda kerja (maks.): 180 mm, lebar benda kerja (maks.): 1.000 mm, 1 Hodpfx Aeyttyvebxek

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT Hodpfeyttrxex Abxjk CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, model controller: POWERCONTROL, panjang benda kerja (maks.): 4.300 mm, lebar benda kerja (maks.): 2.200 mm, kecepatan pemakanan sumbu X: 80 m/menit, 1 Hodpfx Aboyttqzsxjk

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, daya: 55 kW (74,78 hp), Tahun pembuatan: 2010, kecepatan rotasi (maks.): 2.965 rpm, RINCIAN TEKNIS Kecepatan motor: 2.965 rpm Hjdpsyttk Iefx Abxsk Tekanan kerja maksimum: 8,5 bar Pengering udara Model: ABT 102 Pengering Udara Tekan Tekanan kerja maks.: 21 bar RINCIAN MESIN Model kontrol: HMI PLC KAESER Daya motor: 55 kW Tegangan operasi: 400/460 V Mesin dijual dan dikirim dalam kondisi aktual dan hukum (‘sebagaimana dilihat dan disetujui’) berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli memiliki hak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 7548

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Hedpoyttf Sjfx Abxjk Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350 Hodpfx Ajyttcwobxok

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah spindel: 21, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 60 m/menit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of stations: 10 MACHINE DETAILS Total connected load: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Collets and cutters are not included in the scope of delivery. Safety guards are supplied as available (right side guard is missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. Hedpfx Aboytr Rysxsk External reference: 8174

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, daya: 25 kW (33,99 hp), tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 18 m/menit, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Panel Height min.: 8 mm Panel Height max.: 60 mm Edge Thickness min.: 0.3 mm Edge Thickness max.: 12 mm Max. Feed Speed: 18 m/min Sequence of Processing Steps: Section 1 Operation: Positioning Motor Power: 2.5 kW Automatic Control Edge Preheater Glue Tank Pre-glue Heater Roll Magazine Section 2 Operation: Trimming Number of Motors: 2 Section 3 Operation: Edge Milling Number of Motors: 2 Motor Power: 0.55 kW NC Positioning Section 4 Operation: Corner Rounding Number of Motors: 2 NC Positioning Section 5 Operation: Milling Number of Motors: 1 Motor Power: 3.5 kW Section 6 Operation: Edge Scraping Section 7 Operation: Glue Scraping Section 8 Operation: Brushing Number of Motors: 2 MACHINE DETAILS Total Power: 25 kW EQUIPMENT Panel Support Guide Spraying Unit Control with more than 20 control systems CE Marking Hedpfx Absytr Rgexsk The machine is sold and delivered in its actual technical and legal condition (“as seen and inspected”), based on photo documentation and technical/commercial documentation of descriptive character. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External Reference: 6216