Bor Mesin grinding

SA-2500

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Speed: 4500 rpm, max. drum diameter: 300 mm / 167 mm, solids: 2.6 kg/dm³, material temperature min./max.: 5°C / 100°C, bowl dimensions X/Y: 300 mm / 1200 mm, machine material: stainless steel, operating hours: 62,293 h. Spare parts included. An on-site inspection is possible. Dcodpfxju Av H Dj Aa Ted

Tahun pembuatan: 2009, Kondisi: baik (bekas), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Dcsdpfxjqiz N Rs Aa Ted

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger Dsdpewtppzefx Aa Tscd • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length (face/longitudinal): face: 165 mm / cross: 160 mm Center height over bed: 200 mm Gap length: no gap mm Speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021...2.34 mm/rev / cross: 0.09...1.6 mm/rev Tailstock quill taper: MT 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal jaws - Multifix quick-change tool post - Foot brake - Coolant pump (delivery line not included) Dcedou Ixydjpfx Aa Tod

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Dcsdpfx Aaoiwkhke Tjd

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Set of Rapid Steam Generators - Jumag Comprising 3 rapid steam generators including water softening unit and chemical dosing system Dodpfx Aajwn H Aus Tscd 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year of manufacture: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year of manufacture: 2002

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Dsdjd Du T Iopfx Aa Tecd Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: baru, Mesin Bubut Ulir dan Tarik Presisi Merk: OPTiturn Model: TH 4210 No. Art.: 3462050 Kondisi: Mesin baru Tinggi senter: 210 mm Jarak senter: 1.000 mm Dilengkapi secara standar dengan: - Rangka mesin - Dudukan baja empat arah - Lampu mesin LED - Bushing reduksi MK 6/MK 4 Dsdpfx Aasdbgxcj Tscd - 2 senter tetap MK 4 - Dudukan steady rest tetap, 15–105 mm - Dudukan follow rest, 10–65 mm - Pelindung chuck, keamanan listrik - Perangkat pendingin - Set roda gigi pengganti - Pengisian oli - Alat pengoperasian - Buku panduan pengoperasian

Tahun pembuatan: 1984, Kondisi: bekas, Max. Schleifdurchmesser: 40 mm Min. Schleifdurchmesser: 5 mm Dcjdpfx Aocq Rv Uja Ted Gewicht: 0,9 t Lieferumfang: - 2 Schleifscheiben mit Flansch - 8 Spannzangen - 1 Kühlmittelbehälter - Mechanischer Vorschub mit Festanschlag Hinweis: Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Kondisi: sangat baik (bekas), Walter dividing head Type UPA 125 N (28487) direct and indirect dividing center height 125 mm suitable for horizontal and vertical operation spindle taper MT 4 KKG 3 Dcodpfx Aajtrnnde Tod travel range SPH 125 mm mounting taper MT 2 total transport weight 62 kg dividing head 48 kg