Kompor Udara Panas, Kompor Bengkel, Kompor Kayu

WLO 5 50 KW

Kondisi: baru, Tahun pembuatan: 2025, Heating output / nominal heat output: 21 kW For rooms of approx. 300 to 500 m³ (according to DIN 4108) Flue gas outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Kedpfx Aehvibzeahjnf Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits specified in the 1st BImSchV (Federal Emission Control Ordinance).

Kondisi: seperti baru (mesin pameran), 1 roller conveyor table, 3.0 m long x 0.77 m wide, equipped with 7 carrying rollers, pneumatic elevation and alignment chain with worm gear and bellows cylinder, including a wooden transfer roller carriage with rubber turntable for single-operator timber feeding, and two foldable stop rollers for boards from the bandsaw that have already been edged on one side. 1 roller conveyor table, 3.5 m long x 0.77 m wide, equipped with 8 carrying rollers, available with or without transfer roller carriage. Ksdst E Nw Topfx Aahsnf Other similar roller conveyor tables available.

Tahun pembuatan: 1993, Kondisi: baik (bekas), Braun WES Tension Carriage Fully hydraulic with auxiliary carriage with rails Track width: 79 cm Good condition - immediately available Also check out my other listings. Kjdpfx Aasfuh Dyjhenf I look forward to your inquiry.

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 510 kW Operating output: 407 kW New unit, originally packed: Yes Flue diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Ksdpfxek Utrwe Aahsnf Airflow rate: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Oven height without hot air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Kondisi: baru, Tahun pembuatan: 2025, RLA 400 VIBER Output 11,300 m³/h Capacity approx. 11,300 m³/h Motor power 11 kW / 15 HP Speed 3,000 rpm Suction velocity 32 m/s Extraction outlet diameter 355 mm Filter material: polyester Filter permeability: 5 micron Filter size: 160 x 935 mm Number of filters: 58 Chip bin size: 500 x 500 x 600 mm – 3 pcs Voltage: 380V Dimensions: 1000 x 3000 x 2300 mm Weight: 630 kg Kedpfx Aaslkd Tfohsnf Noise level: 85 dB (disconnected) / 70 dB (connected) + €850 for models with fire extinguisher (Safe System) + €1,350 for models with inverter (speed control)

Kondisi: baik (bekas), Radio-controlled, fully hydraulic quick-release carriage with hydraulic auxiliary carriage. Track gauge 840 mm. Control console and electrical control cabinet. Knsdped Nqrqjfx Aahsf

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Ksdpfx Aeg A D Anoahonf Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: bekas, Brewhouse with a cast wort capacity of 20 hl, comprising the following components: 1. Milling system (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, grist transport, and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels featuring copper covers, spindle station, and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar), and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Bright beer tank cellar with 2 x bright beer tanks (Speidel, 2021, 86 hl, 3 bar), 1 x bright beer tank (INOX, 2018, 67 hl, 3 bar), and 4 x bright beer tanks (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB Multimat MT/2, 1997, 17–20 kegs/h) 6. Chiller unit as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. Steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-fired) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with control cabinet Need only part of the system? This unit is offered on a brokerage basis. Partial sale may be possible—just contact us and submit your offer. Kjdpfowgc Udjx Aahsnf Machine (additional info): Cast wort capacity 20 hl, years built 1997–2021 Cast wort capacity: 20 hl Features: Milling system; 3-vessel compact brewhouse; fermentation vats; fermentation, storage and bright beer tanks; keg system; chiller unit; steam generator; hot water tank; CO2 liquid gas tank.

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 0523813, 22728 Technical Data: - Welding current: max 335 A at 35% duty cycle - max 260 A at 60% duty cycle Kjdpfx Aaerm Rpvohenf - max 200 A at 100% duty cycle - Welding current adjustable in 36 fine steps from 40 A to 335 A - 2-roll wire feed - Wire feed continuously adjustable - 2-stroke / 4-stroke operation selectable - Spot welding and interval welding functions - Air-cooled torch package, 4 m - Ground cable - Pressure regulator - Connection: 400 V - Required space approx.: W 550 x H 1000 x D 1000 mm - Weight approx.: 150 kg

Tahun pembuatan: 2023, Kondisi: baru, Selling a new WLO 4 35 kW warm air furnace, workshop stove, wood stove, and hall heater Ksdeixupujpfx Aahsnf Technical Specifications of the Furnace: - Rated heating capacity: 30.00 kW - Maximum heating capacity: 35.00 kW / approx. 300 m² - Included in delivery: high-performance axial fan, speed: 1350 rpm, capacity: 3500 m³/h - Included in set: Driver - Innovative air jacket design fully encloses the stove for maximum efficiency - Indestructible design—entire unit made from certified P265GH and 16Mo3 boiler plates with thicknesses of #6 mm and #10 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 290 kg - Gross weight: 310 kg - Furnace lining: 28 fireclay bricks - Two large removable cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appearance - Robust construction - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00 % - CO emissions at 13% O₂: 1.20 m - Recommended fuel type: Well-seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal only as an admixture up to 10% Safety and Certifications: - CE mark: YES / on the nameplate - Compliance with standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External dimensions: Total width: 580 mm x total depth: 950 mm x total height: 1310 mm - Stove dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm - Upper door dimensions (3 and 4 mm steel plate): Width: 390 mm x Height: 230 mm - Middle door dimensions (3 and 4 mm steel plate): Width: 390 mm x Height: 155 mm - Lower door dimensions (3 and 4 mm steel plate): Width: 390 mm x Height: 150 mm - Upper loading opening: Width: 310 mm x Height: 210 mm - Middle and lower loading opening: Width: 310 mm x Height: 130 mm - Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Specifications: - Fan type: Axial blower - Material: Steel (propeller + housing) - Diameter: Ø 400 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82 A - Speed: 1350 rpm - Airflow: 3500 m³/h - Safety: CE mark + safety grid