Penumpuk rotor

Magni RTH 6.21

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees Hnodpfx Asx Szu Hea Neg - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: bekas, daya: 55 kW (74,78 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 140 l, tinggi angkat: 17.550 mm, Tahun pembuatan: 2023, jam operasional: 2.310 h, Perlengkapan: pendingin udara, Tahun produksi: 2023 Berat kosong: 6.850 kg Hnjdpfx Aasw Afp Ne Neg Kapasitas muatan: 4.000 kg Berat kotor maksimum: 10.850 kg Dimensi (P x L x T): 627 x 242 x 250 cm

Kondisi: bekas, daya: 100 kW (135,96 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, tinggi angkat: 20.800 mm, konfigurasi gandar: 4x4, Tahun pembuatan: 2020, jam operasional: 1.079 h, Perlengkapan: penggerak semua roda, Drive: wheel Unladen weight: 17,900 kg Engine make: Deutz Lifting capacity: 6,000 kg Maximum speed: 40 km/h Hjdpfx Aajtr Iqge Nong Serial number: 00003511 Transport dimensions (L x W x H): 7.89 x 2.53 x 3.12 m Please contact PFEIFER GROUP for further information.

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives Hsdex Szuyopfx Aa Neng - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 2.600 kg, tinggi angkat: 5.730 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, jenis penggerak: Diesel, Rigid telehandler Mast type: Standard Hedpew Eqctjfx Aa Neng Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: MINI AGRI 26.6 STAGE V TÜV/DEKRA approval 20 KM/H. Standard steering axles, hydraulic single-lever control with proportional and simultaneous control (flow-sharing). Closed-center system including pressure relief kit for hydraulic couplings. Compatible with lifting equipment and winches. (Joystick with deadman switch sensor). Air-suspension seat, air conditioning, wheel set #12.0/75-18 with mudguards, EURO carrier plate with quick-attach system for accessories, hydraulic control from the cabin. Steering control indicator light. Radio pre-installation kit with speakers and antenna. Work lights on cabin. Two rear swiveling LED work lights on cabin. Additional external glove compartment. Boom suspension damping. 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, CE certificate, with Weidemann mount.

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang garpu: 1.200 mm, panjang total: 7.760 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg Hnsdpfex Avyisx Aa Njg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang garpu: 1.200 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar Hsdpfx Aox Avx Soa Nsng - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, kapasitas angkut: 6.000 kg, tinggi angkat: 30.000 mm, jenis bahan bakar: diesel, tipe tiang: telescopik, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Rotating telescopic handler Mast type: Telescopic Technical condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Hjdpfsw Eqdwex Aa Nong Rear tire condition: 80 - 100% Description: Vehicle undergoes UVV (accident prevention regulation) inspection. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd hydraulic valve, 4th hydraulic valve, heater, road approval (StVZO), fully enclosed cab, CE certificate. PEGASUS60.30St.V TÜV/Dekra approval, 20 km/h Axles for construction machines with automatic 45% differential lock on the second axle, additional stabilizer platforms, pair of LED headlights on fixed boom, 7-pin socket on turret, radio pre-installation kit with antenna and speakers, standard carrier plates for tools, mechanically sprung Grammer seat with dual joystick, right joystick with integrated FNR (Forward-Neutral-Reverse) and electrical pre-installation for attachments with 3 movements. Wheel set: 18R22.5 XF MICHELIN off-road tires, semi-automatic air conditioning, removable front windshield guard for cab, kit for travel with 180° turret rotation, boom vibration damping, integrated rear-view camera with 7-inch display (not compatible with 7-inch monitor with digital camera on the telescopic boom), telematics kit (DTS), road headlights (front) with LED daytime running lights, cab with laminated glass front windshield, pre-installation for Woodcracker saw. Three-sided personnel basket 120x240cm, hydraulically extendable to 420cm. Load capacity 300kg. Pallet fork carrier plate including A&M load hook, width 1, pallet forks FEM4A, tines: 150x50, length 1.2m, load capacity.

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m Hnsdsxmlbkspfx Aa Neg - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: baru, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 Hedpfx Aaoxfcb So Neng - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 51 kW (69,34 hp), jenis bahan bakar: diesel, berat kosong: 5.500 kg, berat muatan maksimum: 500 kg, konfigurasi gandar: 4x4, Tahun pembuatan: 1983, jam operasional: 13.859 h, EN Hsdpfx Aasxvyv Uj Njng

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 20.800 mm, panjang total: 7.890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 HP) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm Hodjxd Humepfx Aa Nong - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rate: Electronically controlled axial piston pump, variable displacement motor - Transmission: Dropbox gearbox with 2-speed range for forward and reverse travel - Axles and brakes: Type Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes at each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance data: Max. travel speed 40 km/h - Max. drawbar pull at lifting hook 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum working pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa, variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional SIL valve - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two Danfoss 2-axis joysticks with deadman switch, control via CAN bus technology