Penumpuk rotor

Magni RTH 6.25 Drive

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 6.000 kg, tinggi angkat: 25.000 mm, panjang total: 8.680 mm, - Rotating Telescopic Handler RTH 6.25 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 25.00 m - Rotation: 360° continuous - Rated output: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler Gsdsx Szutepfx Adtsbg - Drive type: hydrostatic - Model: Danfoss/Rexroth - Max. pressure: 480 bar - Delivery volume: electronically controlled axial piston pump, variable displacement motor - Transmission: dropbox transmission with 2-speed forward and reverse gear - Axle type: axles with planetary final drives - Rear axle: steered oscillating axle with hydraulic lock - Front axle: oscillating steering axle with +/- 8 degrees leveling - Service brake: oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Max. travel speed: 40 km/h - Max. drawbar pull at lifting hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 6,390 mm - Diesel fuel capacity: 175 l - AdBlue: 10 l - Hydraulic oil: 165 l - Engine oil: 9 l - Coolant: 20 l - Max. operating pressure: 350 bar - System type: load sensing - Working pump: Danfoss/Casappa - variable displacement pump - Distributors for boom and upper carriage movements: Danfoss - SIL 2 proportional solenoid valve - Outrigger distributors: Bosch Rexroth - electrohydraulic actuators - Motion control: two 2-axis Danfoss joysticks with dead man function, CAN-bus control

Kondisi: baru, - Semi-automatic - Hydraulic - Infinitely variable bandsaw speed - Double mitre - Hydraulic clamping of mitre adjustment - Saw feed pressure adjustable hydraulically - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling Gbsdpfx Aovkkl Todteg - Automatic shut-off - Automatic machine shut-down in case of: open cover, broken blade, insufficient blade tension - Emergency stop - Documentation - 400V

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 6.000 kg, tinggi angkat: 25.000 mm, panjang total: 8.680 mm, - Rotating Telescopic Handler RTH 6.25 - Maximum load capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 25.00 m - Rotation: 360° continuous - Rated output: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss/Rexroth - Max. pressure: 480 bar - Delivery volume: electronically controlled axial piston pump, variable displacement motor - Transmission: dropbox transmission with 2-speed forward and reverse gear - Axle type: axles with planetary final drives - Rear axle: steered oscillating axle with hydraulic lock - Front axle: oscillating steering axle with +/- 8 degrees leveling - Service brake: oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Max. travel speed: 40 km/h - Max. drawbar pull at lifting hook: 72 kN - Gradeability: 41% Gbjdpfsx I Skkjx Adtog - Turning radius (with forks): 6,390 mm - Diesel fuel capacity: 175 l - AdBlue: 10 l - Hydraulic oil: 165 l - Engine oil: 9 l - Coolant: 20 l - Max. operating pressure: 350 bar - System type: load sensing - Working pump: Danfoss/Casappa - variable displacement pump - Distributors for boom and upper carriage movements: Danfoss - SIL 2 proportional solenoid valve - Outrigger distributors: Bosch Rexroth - electrohydraulic actuators - Motion control: two 2-axis Danfoss joysticks with dead man function, CAN-bus control

Kondisi: bekas, Telescopic Handler Haulotte HLT 3614 Year of manufacture: 2012 Lifting height: 13.60 m Maximum lifting capacity: 3.6 t Operating hours: approx. 3,950 h Own weight: 12,400 kg Length to back of forks: 6.43 m Width: 2.44 m Height: 2.60 m Engine: Deutz TCD 2012 L04 2Vm Equipped with pallet forks Tyres in very good condition Gedovzmq Hjpfx Adtebg This offer is directed exclusively at commercial customers as defined by §14 BGB No sale to private individuals!

Kondisi: bekas, daya: 55 kW (74,78 hp), jenis bahan bakar: diesel, tinggi angkat: 13.800 mm, Tahun pembuatan: 2022, jam operasional: 3.694 h, Berat kosong: 11.370 kg Merek mesin: JCB Kapasitas angkat: 4.000 kg Kecepatan maksimum: 29 km/jam Gbedpfxoxq Ayre Adteg Nomor seri: JCB5A8MGVN3096768 Kondisi ban depan: 95 Kondisi ban belakang: 95 Dimensi transportasi (P x L x T): 6,23 x 2,35 x 2,59 m Silakan hubungi PFEIFER GROUP untuk informasi lebih lanjut.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 5.000 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 450 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, Perlengkapan: doser, kecepatan rotasi dapat diubah tanpa batas, pencahayaan, rem mesin, You can obtain all common Altendorf models from the F25, F35, WA80, F45, as well as the Hand Guard machine, in all available configurations. Standard Equipment - Electromotive height and tilt adjustment - 0–46° with automatic correction of cutting height when tilting - Eye-level control panel, swivel-mounted - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm (more available upon request) - Crosscut fence with fixed 90° position, manually adjustable up to 3,200 mm via scale - Maximum blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for the main saw blade - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Precise speed adjustment to the material increases both cut quality and saw blade longevity Gbsdpewf Hdgofx Adtjg Increased Cutting Height for Single-Sided Tilting - This option is equipped for single-sided tilt with a large extraction hood, for a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. - In combination with a scoring unit, the maximum saw blade diameter is 500 mm with a cutting height of 179 mm. - Available only with a minimum drive power of 5.5 kW (7.5 HP). 2-Axis Scoring Unit for One-Sided Tilt - Electromotive height and lateral adjustment, scoring blade height programmable with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting possible only with machines prepped for scoring unit LED Lighting - Especially energy-efficient LED technology makes the scoring area clearly visible The Altendorf double roller carriage is famous for its smooth operation and precise guidance. The carriage can be locked in any position continuously. The large double rollers, precisely manufactured from hardened steel, ensure absolute accuracy between the top and bottom carriages via hard-chromed guide rods. This running quality is maintained even after decades of use and exposure to dirt. The carriage is designed as an extremely torsion-resistant, dimensionally stable multi-chamber hollow system. The table surface is precisely planed and anodized. A hard-chromed round bar, form-fitted into the top carriage, serves as a guide for the cross slide and various accessories. The entire unit requires minimal maintenance and no lubrication. On/Off Switch on the Double Roller Carriage - The on/off switch is always within easy reach on the double roller carriage. Both the main saw blade and the scorer can be switched on or off using the four push buttons—saving time and increasing safety. Angle/Mitre Fence, Crosscuts up to 3,500 mm - This patented Altendorf fence with integrated length compensation facilitates precise cutting of angles and mitres in a single operation. In both positions, the swivel angle can be adjusted continuously up to 49° and is displayed via a measuring scale. Ask us about your dream machine—we are happy to advise you. Naturally, we can arrange inspections directly at the machine, at the factory, or even with wood dust in the air.

Kondisi: baik (bekas), Diameter gelondong maksimum: 910 mm Lebar pemotongan maksimum: 730 mm Ketebalan papan terakhir minimum: 25 mm Panjang pemotongan maksimum: 6300 mm Panjang pemotongan minimum: 1200 mm Bobot gelondong: 2000 kg Kecepatan maju (dapat diatur secara kontinu): hingga 47 m/menit Kapasitas (produk jadi): 1,8-3,0 m³/jam Godsxd Tgvspfx Adtobg Daya motor utama: 22 kW Diameter puli: 600 mm Panjang pisau Wood-Mizer: 4668 mm Lebar pisau Wood-Mizer: 38 mm

Kondisi: bekas, daya: 54 kW (73,42 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 146 l, warna: kuning, tinggi angkat: 18.000 mm, tipe tiang: telescopik, Tahun pembuatan: 2023, jam operasional: 1.220 h, Tahun pembuatan: 2023 Godpfsx Ngutox Adtjbg Berat kosong: 11.520 kg Kapasitas muatan: 4.000 kg Berat kotor maksimum: 15.520 kg Dimensi (P x L x T): 626 x 232 x 270 cm Tinggi kerja: 1.800 cm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 1.990 h, kapasitas angkut: 5.000 kg, tinggi angkat: 25.000 mm, jenis bahan bakar: diesel, tipe tiang: telescopik, tinggi konstruksi: 3.050 mm, daya: 115 kW (156,36 hp), panjang garpu: 1.200 mm, berat kosong: 18.900 kg, panjang total: 7.840 mm, jenis penggerak: Diesel, lebar konstruksi: 2.490 mm, Rotating telehandler Load center: 500 mm Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 km/h Condition: Ready for use and fully functional Godpfjx Nz D Nex Adtsbg Technical condition: Good Front tires type: Pneumatic Front tires size: 445 / 65 R22.5 Front tires condition: 80–100% Rear tires type: Pneumatic Rear tires size: 445 / 65 R22.5 Rear tires condition: 80–100% Description: The alternative to a mobile crane, wheel loader or conventional telehandler: the Manitou MRT 2550 Privilege Plus is the ideal construction machine. It allows you to handle loads of up to 5,000 kg and carry out tasks at heights of up to 25 meters. As a 3-in-1 vehicle (telehandler + crane + work platform), it offers a wide range of daily applications. Its four-section boom and 360° rotation capability enable you to manage various material handling tasks from a fixed position. Equipment features: - Third control valve - Work platform preparation with radio remote control - Fork carriage PFB/1320 mm - Fork tines 150 x 50 x 1200 mm - Load protection grille - 7-inch LCD color display - Automatic parking brake - Return line - Tires 445/65 R 22.5 - Reversing alarm - Rotating beacon - Attachment recognition system - CAN BUS control - AdBlue system

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 5 h, kapasitas angkut: 6.000 kg, tinggi angkat: 31.000 mm, jenis bahan bakar: diesel, tipe perpindahan gigi: semi-otomatis, Perlengkapan: kabin,