Pusat pemesinan universal

Maho DMF 260 - 7

Kondisi: bekas, Tahun pembuatan: 2010, jam operasional: 26.827 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, panjang pemakanan sumbu X: 2.600 mm, panjang umpan sumbu Y: 700 mm, panjang umpan sumbu Z: 700 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 40 m/menit, laju pemakanan sumbu Z: 40 m/menit, daya nominal (semu): 42 kVA, produsen pengendali: Siemens, model controller: 840 D SL Operate, berat benda kerja (maks.): 6 kg, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 5.000 mm, lebar meja: 700 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, kecepatan rotasi (maks.): 8.000 rpm, berat keseluruhan: 14.500 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 8.280 h, daya motor spindle: 23.500 W, hidung spindel: SK 40, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 6.000 g, Perlengkapan: konveyor serpihan, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. Travel paths: x-axis travel: 2,600 mm y-axis travel: 700 mm z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Speed range - main spindle: 8,000 rpm Drive power - main spindle: 23.5 kW Tool holder: SK 40 Work table: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with empty adjacent pocket: 130 mm Max. tool length: 300 mm Iodpfx Abeytruxsystl Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Maximum feed rate: 40,000 mm/min Maximum feed force: 8 kN Total power requirement: 42 kVA Machine weight: approx. 14.5 t Space requirement: approx. 7.0 x 5.0 x 2.8 m Equipment: - Chip conveyor - Coolant system - High-pressure cooling - Internal coolant supply - Paper band filter - 2x rotary viewing windows - Tool magazine, 30 pockets - Touch probe - Operating mode 4 - Prepared for a 4th axis At approximately 7,500 spindle hours, the X-axis and the tool changer were overhauled. If you have any questions or require further information, please feel free to send us a message or call us. Accessories, depicted tools, and clamping devices are included in delivery only if explicitly stated in the additional information. Technical data and specifications may be subject to change and error. Sale subject to prior disposal!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 9.422 h, Fungsionalitas: berfungsi sepenuhnya, Kami menjual, atas perintah eksklusif dari pelanggan, sebuah pusat pemesinan 5 sumbu bekas, relatif baru, dalam kondisi seperti baru, dan hanya digunakan sedikit, dengan desain GANTRY; model DMU 340 Gantry; tahun pembuatan 2020; 9422 jam operasi; 2991 jam spindel. Dilengkapi dengan antarmuka operator SIEMENS CELOS. Iedpfjzx Ek Asx Abystl Semua spesifikasi, data teknis, atau konfigurasi mesin dapat Anda peroleh dengan permintaan terpisah terkait iklan ini. Mesin ini siap untuk diperlihatkan dan dapat segera diperiksa. Foto-foto asli lainnya dapat Anda peroleh secara eksklusif melalui permintaan dan setelah verifikasi identitas Anda. Penjualan kembali ke dealer saat ini tidak direncanakan. Mohon untuk tidak mengajukan pertanyaan terkait hal ini.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Ijdpfoxv Av Rsx Abystl Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 2.560 h, kapasitas angkut: 1.600 kg, tinggi angkat: 4.950 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.150 mm, panjang garpu: 1.200 mm, berat kosong: 3.400 kg, panjang total: 2.114 mm, jenis penggerak: Elektro, lebar konstruksi: 1.100 mm, Forklift Listrik 4 Roda Itsdpfsw U E Uuex Abysl Titik berat muatan: 500 Tipe mast: Triplex Kelas kecepatan: 20 Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: Normal Ban depan tipe: Non Marking Kondisi ban depan: 60 - 80% Ban belakang tipe: Non Marking Kondisi ban belakang: 60 - 80% Baterai Volt: 48V Baterai Ah: 625Ah Tipe baterai: PzS Side shifter, Katup ke-3, lampu kerja belakang, lampu kerja depan,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting Ijdpfx Aezb Evlsbystl • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, ENGLISH TRANSLATION: DECKEL MAHO PFRONTEN GMBH DMG MORI DMU 60 eVo Universal Machining Center Travel X/Y/Z: 600 / 500 / 500 mm Standard spindle speed range: 20 – 14,000 rpm Motor spindle: 18.9 / 14 kW (40/100% duty cycle) Standard tool holder: SK40 according to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator interface: SmarT.NC Control panel: DMG ERGOline Control Screen: 19" NC swivel rotary table Clamping surface: 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Table load capacity: 400 kg Direct measuring systems Table cooling Spindle specification: 20 – 18,000 rpm Tool holder: HSK-A63 according to DIN 69893 Tool magazine: 60 positions Magazine type: chain magazine with double gripper Heat exchanger for spindle and table Active cooler for electrical cabinet Direct path measuring system Full enclosure 3D control Measuring probe: Heidenhain TS 649 DMG 3D quickSET toolkit preparation 3D quickSET software option 5-axis machine configuration Signal light: four-color Pre-installation for handling system: PH 150-8 Chip conveyor: scraper-type chip conveyor with cleaned slotted screen Internal coolant supply (ICS) Paper band filter: 40 bar / 231 l/min / tank 600 l Rotating viewing window Sealing air Linear measurement systems Bed flush Rinse pistol for chip flushing Blow air through spindle center Selection via M-function Conditioned air with low oil content Safety package for power failure Surge limiter Undervoltage monitoring with rapid braking control Operating mode 4 Process monitoring in production Documentation: German Screen text: German / English DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet loading and unloading system with handling system and pallet magazine Rotary storage: 8 positions Servo axes: 2 Z-axis: pneumatic Gripper arm / fork IPC with touch panel DMG Automation Jobmanager Graphical operator guidance Signal light: 4-color Integration kit: for DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of pallets: 8 Hole grid: 50 mm Z-support: steel Interface: Profibus Standard Automation Electrical interface version 4.0 Safety door and emergency stop signals, robot side Machine gross weight: 11,000 kg Machine net weight: 9,500 kg Machine dimensions: 400 x 280 x 315 cm ICS gross weight: 800 kg ICS net weight: 650 kg ICS dimensions: 200 x 175 x 190 cm Chip conveyor gross weight: 640 kg Itedpjyzamaofx Abyel Chip conveyor net weight: 590 kg Chip conveyor dimensions: 355 x 140 x 170 cm Transport traverse gross weight: 200 kg Transport traverse net weight: 200 kg Transport traverse dimensions: 210 x 80 x 50 cm

Kondisi: baik (bekas), Tahun pembuatan: 1995, Shredding via 3 HARDOX spirals Iedpfx Aol I Dx Nobyotl Diameter x length: approx. 500 x 1,700 mm Feed opening: approx. 1,100 x 1,700 mm Mounted on steel frame New feed hopper 8 m³ New control cabinet Includes 7 unused spare augers

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 6.929 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 530, kecepatan spindel (maks.): 14.000 rpm, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, Mesin 5s POSmill H 500 U ini diproduksi pada tahun 2017. Mesin ini dilengkapi dengan kontrol Heidenhain TNC 530, majalah perkakas dengan 60 posisi, dan meja putar KESSLER dengan diameter 500 mm. Mesin ini memiliki sistem canggih seperti pemantauan level cairan pendingin otomatis dan sistem pengukuran perkakas laser BLUM. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal POSmill H 500 U ini. Hubungi kami untuk informasi lebih lanjut. • Majalah perkakas: 60 posisi, HSK-A63 • Meja putar: Meja putar KESSLER, Ø 500 mm • Penghembus udara spindel: Udara melalui spindel • Suplai cairan pendingin internal: 20 bar, dengan sistem penyaringan pita • Sistem cairan pendingin: Pemantauan level cairan pendingin otomatis • Suplai media: Suplai media 3 saluran di tengah meja • Roda tangan: Roda tangan elektronik portabel • Pengukuran perkakas: Sistem pengukuran perkakas laser BLUM • Pengukuran benda kerja: Probe benda kerja inframerah (sistem probe 3D); termasuk persiapan pengukuran benda kerja • Penglihatan: Jendela penglihatan rotasi termasuk Iedsyir Dxspfx Abyotl • Pemantauan tabrakan: Modul pemantauan tabrakan POS DCM • Kondisi: Kondisi sangat baik • Jam operasi: 6.929 • Catatan aksesori: Tanpa dudukan perkakas dan tanpa sistem penjepit cepat Peralatan Tambahan • Pemisah kabut oli: Elektromekanik • Unit hidraulik: Unit hidraulik, dikendalikan oleh fungsi M Spesifikasi Teknis Ukuran kerucut HSK 63

Kondisi: baik (bekas), Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Ijdpfoyb R Erex Abyetl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jumlah sumbu: 3, Mesin 3-sumbu tipe DMG MORI CMX 600 V ini diproduksi pada tahun 2016 dan telah dilengkapi dengan persiapan untuk meja putar sumbu ke-4, kontrol Siemens 840D, serta spindle SK40. Mesin ini dilengkapi dengan sistem pengukuran canggih baik untuk benda kerja maupun alat, yang menjamin presisi tertinggi. Sangat ideal bagi siapa pun yang ingin memperluas kapasitas pemesinan mereka dengan mesin yang andal. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Itedpfjx D Di Uox Abyol • Mesin utama dengan opsi untuk penggerak utama • Persiapan untuk meja putar (sumbu ke-4), EA 510L (meja putar tidak termasuk dalam paket) • Sistem pengukuran keamanan untuk sumbu X/Y/Z • Lampu sinyal, 4 warna, standar • PROGRESSLine & Planolight • Bahasa tampilan: Hungaria • Teks layar: Jerman/Hungaria • Dokumentasi: Doc 1 & Doc 2 (HU); skema listrik (DE) • Lain-lain: Persiapan penyerahan mesin; unit konversi internal ID 34; pemeriksaan dan persiapan tercatat Perlengkapan tambahan • Konveyor serbuk dengan ICS (aliran pendingin internal) + tangki serbuk (paket produksi 1) • Sistem pengukuran benda kerja TS 649 (di atas meja) • Sistem pengukuran alat TT140 • Pencahayaan di majalah alat • Pemuatan alat melalui pintu majalah • Platform/basis mesin berlapis film • Layanan jarak jauh NetService (ID 2632226)