Beli Biesse + Formetal Mesin Pengikat Tepi Satu Sisi bekas (77.444)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, OTT Tornado FÜ + PU SPS-compatible control unit with 7" TFT touch color display CM-CombiMelt for EVA and PUR hot-melt adhesive Pre-milling unit – jointing Fully automatic roller feed magazine Fully automatic edge magazine Pneumatic flush trimming, 0-3° Dkedpfsv Sm Hcox Akton Flush milling – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof cabin with area extraction Cleaning set with 4-way spraying system, fine buffing unit, and lubricant spray system First delivery 2006 Machine has been workshop-tested and is in top condition. The gluing unit has recently been fully serviced and all wear parts replaced. Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cut-off unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush-milling unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine-milling unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper Buffing unit 3-way spraying system Total power: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg — Immediately available —

Kondisi: baru, Tahun pembuatan: 2025, dimensions (length/width/height): 1480 x 760 x 1160 mm Weight: 180 kg Total power requirement: 3.5 kW Edge sanding machine KOS-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt rear panel: 850 x 200 mm - Belt speed: 20 m/sec - Table stroke up to 200 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Extraction connection: 100 mm - Separate oscillation drive with geared motor - Height-adjustable cast iron table, double column-guided - Dual extraction system for the main sanding unit and round sanding table - Sanding unit infinitely tiltable up to 45° - Graphite-coated running surface - Incl. mitre fence with angle scale - Incl. pull-out table extension with multi-roller system - Incl. sanding belt - Dimensions: L = 1480 mm, W = 760 mm, H = 1160 mm Djdpfxovz Hpps Aktekn - Net weight: 180 kg - Gross weight: 230 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Weight: 800 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ Dedpfx Aksvz E Evstekn - Min. / max. edge thickness: 0.4 - 3 mm - Min. / max. edge height: 15 - 48 mm - Min. / max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA (diamond-tipped) jointing cutter heads for pre-joining before gluing, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counterclockwise) - End trimming saw unit for front and rear edge overhang. High precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit to improve edge grip, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tiltable and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Sound enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing Dedevz E Tmopfx Aktjkn - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 1820 x 585 x 1450 mm Weight: 500 kg Total power requirement: 4 kW Edgebander KANTOMAX EASY - Min. / Max. edge thickness: 0.4 – 3 mm - Min. / Max. edge height: 15 – 48 mm Dkedpfx Akovz Hd Hjten - Min. / Max. workpiece height: 12 – 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8 m/min - Control panel positioned at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up pressure rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot with Teflon coating for EVA hot-melt granulate - Glue application via glue roller - Electronic temperature control, working temperature 180–200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - End trimming saw unit for front and rear edge overhang, high-precision linear guide, motor 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm - Total power consumption: 4.0 kW / 400 V - Extraction connector Ø 100 mm - Extendable workpiece support - Noise protection enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=1820, W=585, H=1450 mm - Weight: 500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 8 kg Total power requirement: 0.9 kW Edge banding machine PM5000 With the mobile edge banding machine PM5000 from WEGOMA-VIRUTEX, any workpiece can be easily and conveniently edged: compatible with PVC, ABS, melamine, laminate, or veneer tape that has been pre-cut to the desired length. Suitable for straight, rounded, or shaped panels. Thanks to its user-friendly operation and quick setup, it is particularly practical for the production of small quantities. Equipped with assisted edge feed and electronic speed control. Electronic temperature regulation and precise glue dosage control. Glue pot and edge guide are Teflon® coated for easy cleaning and maintenance. - Microprocessor-controlled temperature setting from 120° to 200° - Speed adjustment on the handle - Adjustment during edging possible, ECO mode - Sleep mode after 1 hour of inactivity, Teflon-coated glue pot - Special glue roller (polymer-coated) for processing 3D edges - Min. edge thickness: 0.4 mm Dsdpfx Akjv A E Iyotokn - Max. edge thickness: 3 mm - Max. edge height: 65 mm - Speeds: 2, 4, 5, 6 m/min - Temperature: 120° - 200° - Glue pot capacity: 230 cm³ - Heat-up time: approx. 8 min - Voltage: 230 V, 50/60 Hz - Power: 830 W

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Operator panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edgebanding materials - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compaction - Centrally adjustable top pressure Dkedpfsvz E Scsx Aktjn - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for pre-milling prior to gluing, spindle adjustment vertical, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one with, one against feed direction) - End trimming saw unit for front and rear edge overhangs, high-precision linear guides, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Top and bottom flush/radius trimming unit with vertical and horizontal sensors, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (profile trimming) top and bottom, for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom and side sensing for rounding pre-milled PVC edges - Buffing unit for final edge finishing on top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, adjustable tilt and height - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound enclosure with inspection window - Compressed air connection: 6 bar - Overall dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2650 x 640 x 1400 mm Weight: 700 kg Total power requirement: 5 kW Edge banding machine KANTOMAX BASIC - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 55 mm - Min./max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression Djdpfx Akevz E T Hetskn - Centrally adjustable top pressure - Gluepot with Teflon coating for hot-melt adhesive granules - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic guillotine for edge banding - Pneumatic cylinder for workpiece separation - End trimming unit for front and rear edge overhangs. Highly precise linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from above, below and laterally, for rounding pre-milled PVC edges - Buffing unit for finishing edges, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, height adjustable - Total connected load: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound-insulating enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Kondisi: baru, Tahun pembuatan: 2025, Measurements (Length/Width/Height) 1050x830x1100 mm Weight 133 kg Total power requirement 2.1 kW Edgebanding Machine KAM535NEO - Motor power S1 250 (+1750) W - Voltage 400 V / 3 / 50 Hz - Feed speed 0–15 m/min - Table size 1000 x 700 mm - Table height 850 mm - Min. workpiece thickness 10 mm - Max. workpiece thickness 50 mm - Edge width 13–54 mm - Edge thickness 0.3–3 mm - Working air pressure 4–5 bar - Operating temperature 170 °C - Min. internal curve radius 20 mm - Sound pressure level dB(A) < 70 - Packing width 830 mm - Packing length 1,050 mm - Packing height 1,100 mm - Gross weight 161 kg - Net weight 133 kg - Semi-automatic edgebanding machine - The machine is suitable not only for straight edges but also specifically for edging curved edges - Direct glue application on straight and curved edges - Double-sided glue application on laminate and edge - Automatic length cutting - Glue temperature electronically adjustable - Feed speed variably adjustable - 1750 W heating power Djdpfx Akevz E Hmotokn - 250 W feed motor

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 860 x 1060 x 1060 mm Weight: 280 kg Dsdpfx Aovz En Rektekn Total power requirement: 3 kW Edgebander model: CONTOUR 350 DELUXE - Motor power: 0.4 kW - Heating power: 2.2 kW - Feed speed: infinitely variable, 0-14 m/min - Voltage: 400 V / 50 Hz - Min. workpiece thickness: 10 mm - Max. workpiece thickness: 40 mm - Edge thickness: 0.3 - 3 mm - Edge width: 15 - 50 mm - Compressed air connection: 6 bar - Min. internal curve radius: 20 mm - Suitable for applying edging to curved workpieces - Glue application on straight and curved edges - Glue application on both the workpiece and the edging tape - Automatic length trimming - Glue temperature electronically and continuously adjustable - Installation dimensions: 1600 x 1150 x 965 mm - Transport dimensions: L=860 mm, W=1060 mm, H=1060 mm - Net weight: 280 kg - Gross weight: 340 kg

Kondisi: sangat baik (bekas), de-hu-01 Dedpfx Akeyxl Sistekn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 45 mm, ketebalan tepi (maks.): 45 mm, tinggi total: 1.640 mm, panjang total: 3.350 mm, lebar total: 1.510 mm, berat keseluruhan: 770 kg, diameter nosel ekstraksi: 60 mm, We are offering for sale a professional edge banding machine with pre-milling unit from FELDER, model G480. Below are some key details about the machine: * Year of manufacture: 2017 * Equipped with Schugoma's Hot-Air System for zero-joint edging * Connected load: 7 kW * Edge thickness: 0.4–3.5 mm * Panel thickness: 8–45 mm * Minimum panel width/length: 70/210 mm * Feed speed: 9 m/min Dodpfx Aotp T Dtektjkn * Features pre-milling and corner rounding units * Automatic edge feed from a coil * Guillotine for PVC and ABS edging materials up to 3 mm thickness * Teflon-coated gluepot with a 1.2 kg capacity * Saw blade trimming unit with 12,000 rpm * Swiveling control panel with LCD display * Extraction ports: 7 x 60 mm * Weight approx. 770 kg * Overall dimensions: 335 x 151 x 164 cm (W x L x H) * In perfect technical and optical (visual) condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Edge banding machine Manufacturer: IMA Dkjdpev T R Ersfx Akton Model: Quadromat 3512 U Year of manufacture: 1999 Suitable edge materials: Veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Spindle speed: 18,000 rpm End trimming unit Milling units Profile scraping blades Buffing unit Flat scraping blades

Kondisi: baru, Tahun pembuatan: 2025, Edgebanding unit: Yes Edge thickness: up to 3mm Workpiece thickness: from 8mm to 50mm Dsdpek Eai Ujfx Aktekn Minimum workpiece width: 110mm Glue pot: Granulate, quick-change container End trimming saw: yes End trimming / flush cutting: yes Milling station: Chamfer / radius Corner copying: yes Flat scraper: yes Radius scraper: yes Buffing unit: yes Anti-adhesive spray unit: yes Manual infeed fence adjustment Manual workpiece thickness adjustment Connected load: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-261-20-4583, de Djdpoh Ak D Uefx Aktekn

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Tahun pembuatan: 1989 Kondisi: Telah diuji fungsinya Perlengkapan dan data teknis: Ketebalan edge band maksimal: 20 mm Tinggi edge band maksimal: 51 mm Ketebalan material roll maksimal: 3 mm Panjang benda kerja minimal: 140 mm Lebar benda kerja minimal: 60 mm Sistem lem: 1906 Cartridge Dkodpfx Aew I U E Ajktsn Unit penekan Unit frais 1920 – frais rata & miring hingga 20 mm Kebutuhan ruang (P x L x T): 3150x1800x1375 mm Berat sekitar: 800 kg Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 Dodov R Nk Uspfx Aktskn End trimming unit IN-801 Flush trimming unit (top and bottom) RS-100 2-motor multifunction/form milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Maximum workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness, coil: 0.4–3 mm Edge thickness, strips: 0.4–22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing milling extraction connection: 120 mm Glue tank capacity: approx. 3 kg Heating time with 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Dodpfxev Sv Eno Aktskn Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2008, Mesin bekas Tahun pembuatan: 2008 Kondisi: saat ini masih berproduksi Perlengkapan dan data teknis: Perekat maksimal 8-55 mm Dkedpfsw Nadgsx Akton Termasuk panel kontrol yang dapat diputar Unit penyambungan HF, 2 motor Termasuk bak pemanas cepat yang dapat diganti, berlapis teflon Termasuk posisi rol penekan secara elektronik Termasuk unit gergaji potong ganda yang dapat diputar Termasuk unit frais penyerut pinggiran Termasuk unit fase, radius, dan copy sudut yang dikontrol penggunaan dengan paket nesting Termasuk scraper radius dengan paket nesting Termasuk scraper permukaan Termasuk unit alur Termasuk unit polisher Termasuk unit semprotan Ketersediaan: dalam waktu singkat Lokasi stok: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2010, de Dodow I H Rkepfx Aktjkn

Kondisi: bekas, Tahun pembuatan: 2022, Ketebalan tepi: dari 0,4 hingga 5 mm Ketebalan benda kerja: dari 10 hingga 45 mm Dksdpfjxpn Ufsx Aktjn Kecepatan pengumpanan: 8 m/menit - Sistem Quick-Set - Unit joining dengan cutter DIA - Pengumpanan tepi otomatis - Unit gergaji linear dengan permesinan radius - Unit frais multifungsi - Rangka bawah

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, 11066 Dkodpfeydnxnjx Aktjn

Kondisi: bekas, Assembly kit, format processing unit, machining unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine, profile holder for edge banding machine Dodpfegy T Nbsx Aktjkn -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Overall dimensions: 665/540/H375 mm -Weight: 30 kg

Kondisi: bekas, Holz Her Sprint 1312 FÜ + PU Desain berat - ketebalan tepi 0,4 - 12 mm Dkjdpfox Eilqox Aktjn Kontrol layar SPS Unit pra-pemotongan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material gulungan dan potongan Stasiun aplikasi lem: sistem cartridge + lem PU nozzle deteksi otomatis Tinggi benda kerja 6-55 mm Unit pemotong untuk gulungan dan potongan hingga ketebalan tepi 12 mm dengan penyesuaian kemiringan gergaji 0-10° Unit milling, milling rata hingga 12 mm, milling radius - chamfer milling - 15° MOT - 4 sumbu Unit pisau tarik untuk chamfer dan radius dengan 2 holder pisau tarik pneumatik penyambungan pneumatik masuk dan keluar Unit pisau tarik permukaan - finishing Sistem penyemprotan - PU Mesin dalam KONDISI SANGAT BAIK tersedia dari stok di Lieboch

Kondisi: sangat baik (bekas), SCM Contura in excellent condition Dksdpot E T I Nofx Akton