Beli Säulenschwenkkran Ausleger 2,1 M /1000 Kg bekas (104.758)

Kondisi: baru, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange cone Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) incl. grinding wheel T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification: module m, pitch accuracy gg, pressure angle EW Dksdpfxsuayy Ts Akton Advantages: - Virtually eliminates the risk of grinding burn - Up to 50% shorter grinding times - Dressing effort reduced by a factor of two - Double service life of grinding wheels - Consistent grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Max. grinding wheel width: 145 mm Grinding wheel diameter/bore: 300 mm Flange taper: Reishauer 0 Grinding wheel dimensions: 300x145x160 mm Carrier flange (Machine type Reishauer RZ 400/800/1000) + including grinding wheel Dkjdpfx Akouayy Hetsn T1SP 300x145x160 M 1.5 EW20° 3GG from 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profile according to specified module m, tooth count gg, pressure angle EW Advantages: - Risk of grinding burn is virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the grinding wheel service life - Consistently stable grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Grinding wheel width max. 145 mm Grinding wheel diameter/bore: 300 mm Dksdpfjuayyyex Akton Flange cone: Reishauer 0 Grinding wheel dimensions: 300x145x160 mm Support flange (machine type Reishauer RZ 400/800/1000) incl. grinding wheel T1SP 300x145x160 M 2.25 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification: module m, lead gg, pressure angle EW Advantages: - Grinding burn risk virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Grinding wheel width max. 145 mm Dkjdpjuayymefx Aktjn Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M1 EW20° 2GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profiling as specified: module m, pitch accuracy gg, pressure angle EW Advantages: - Risk of grinding burn approaches zero - Up to 50% reduced grinding times - Dressing effort reduced by factor of 2 - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters than standard tools

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 5.000 mm, panjang dalam: 10.000 mm, tinggi dalam: 5.000 mm, luas filter: 250 m², laju aliran volumetrik: 16 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blasting house *up to 5 years warranty* for all blasting media made from a steel structure/insulated panels with filtration system, recirculation system, abrasive recovery, 200l pressure blasting vessel with automatic refilling, blasting hose with dead-man control, breathing air system, LED lighting, wall cladding 70 Shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Dkedpfeu Ey Dlsx Aktjn Abrasive recovery via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across the full width as sweep pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with an appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air separator for abrasive separation and cleaning. Safety features: emergency lighting with battery, emergency stop switches inside the cabin and outside, inspection window to blasting chamber, door/gate limit switches, dead-man control, quick venting for pressure vessel. Warranty up to 5 years on various components. 50 years of experience and more than 3,000 installations in blast room plant engineering.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, nomor mesin/kendaraan: AGH633, Data teknis: 1 unit ABUS LS Crane berputar pilar, Kapasitas angkat 1000 KG Kapasitas angkat penuh: 1000 KG / 1 ton Tinggi: sekitar 3,4 m Ketinggian bawah lengan: sekitar 2,55 m Jangkauan lengan: sekitar 4,5 m Tinggi kait: sekitar 2,15 m Bobot total sekitar 1000 kg termasuk pelat jangkar, diameter 110 cm Termasuk Abus GM chain hoist 1000 kg Rentang putar 270°, koneksi ke 400V 16A Crane dalam kondisi dibongkar dan siap tersedia Lokasi barang: 75053 Gondelsheim Dodpfx Aoxdvk Rjktskn Tersedia crane lain dengan kapasitas 80-5000 kg, silakan bertanya Lihat gambar Pengiriman melalui ekspedisi atau pengambilan hanya dengan perjanjian sebelumnya

Tahun pembuatan: 1976, Kondisi: bekas, nomor mesin/kendaraan: TH20010161, Demag overhead travelling crane, crane beam, crane runway, indoor crane Max. load capacity/lifting capacity: 10t - 10,000 kg, span 11,750 mm Overall dimension with end carriages approx. 12,000 mm Equipped with steel hoist and ground control Construction height from top edge of crane to hook approx. 900 mm End carriage length with buffers approx. 3,500 mm Lifting height (wire rope hoist): 10,000 mm Crane weight approx. 4,000 kg Includes 2 x 25 m running rails HEB280 and conductor rails! Beam lengths per side: 1 x approx. 10 m 1 x approx. 15 m Support spacing: 10 m / 10 + 5 m Crane is dismantled and available immediately ex location 75053 Gondelsheim Used condition Dkodpov A Sa Nefx Akton ----- Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please enquire with postcode Collection preferred

Tahun pembuatan: 1970, Kondisi: bekas, nomor mesin/kendaraan: TH20010142, Demag overhead crane – crane track – hall crane Rated load / lifting capacity max. 10 t – 10,000 kg, span 11,750 mm External dimension with end carriages approx. 12,000 mm Dkjdpfxov A Rxko Akten Fitted with steel hoist and pendant control Height from top of crane to hook approx. 900 mm End carriage length with buffer approx. 3,500 mm Lifting height (wire rope hoist): 10,000 mm Crane weight approx. 4,000 kg Including 2x 25 m running rails HEB 280, incl. power rail system! Girder lengths per side: 1x approx. 10 m 1x approx. 15 m Column spacing: 10 m / 10+5 m Crane is dismantled and immediately available ex location 75053 Gondelsheim Used condition ----- Also available: pillar jib cranes and wall-mounted jib cranes, Demag KBK and Abus HB systems, as well as models by Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible – please enquire with your postcode Collection preferred

Kondisi: sangat baik (bekas), Steady rest (28388) SPH 360 mm Weight: 37 kg Dimensions: see drawing Dkodsmkfd Sopfx Aktjn

Kondisi: hampir baru (bekas), Mesin yang telah direkondisi secara menyeluruh Harga: 4.500 EUR Mixer adonan Dengan paddle Dkodpfex N Efqjx Akton Kemper Mesin memiliki 2 kecepatan Bowl dan mixer terbuat dari stainless steel Unit bergerak di atas roda Timer otomatis Kapasitas: 180 liter / 120 kg adonan atau 75 kg tepung

Kondisi: bekas, Tahun pembuatan: 1990, Gross vehicle weight: 12,000 kg Contact Emal Jaweed for more information. = Additional options and equipment = - Leaf suspension, rear - Leaf suspension, front = Remarks = Suction-pressure tank on tandem chassis, Joskin E&H, type: Master 10000, year of manufacture: 1990, axles: 2, permissible drawbar load: 1,500 kg, permissible axle load: 1,600 kg, max. 25 km/h, tank structure, year of tank structure: 1990, capacity: 10 m³, leaf suspension, trailer hitch, Alliance 550/60-22.5 Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist in worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to errors and prior sale. Djdpoy Ivy Nefx Aktjkn * Trade-in possible! * The general terms and conditions (AGB) of Jaweed GmbH apply exclusively to vehicle or used machinery purchases. * Further information and our terms and conditions are available on our website.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, tekanan (maks.): 250 batang, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for complex geometries to perform right- and left-hand bends. Plug-in bending tools allow for quick changeovers to different tube sizes. A rapid hydraulic system to minimize non-productive times is an important factor for series production. The clamping pressure for the tube can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can accommodate an almost unlimited number of programs storing bending angles, lengths, and rotation angles for up to 50 bending sequences on a single tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In 'Simple Bending', the length and rotation of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is pre-set and a continuous setpoint/actual comparison is performed during bending operations. This excludes mispositioning within a tolerance window, effectively minimizing operator errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically activated upon reaching the bending angle. The compact drive unit with removable mandrel support offers benefits for on-site assembly as well as for special constructions with very long tube in-feeds and is also available as a stationary version with a tool and mandrel bar organizing system. A cost-effective alternative to fully controlled CNC machines. POTENTIAL APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant construction, e.g. for the chemical industry • Metal fabrication • Prototype construction Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10mm/140mm • Min. bending radii: 1.5 x Ø (Standard 2 x Ø) • Multifunction machine control with bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (longer versions available upon request) • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch Dodpfx Akjng Exaetekn OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for clamping force supervision • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • You are welcome to join us for test production at our in-house demo room • Consulting and informational meeting at your site • Consultation and handling of leasing/finance purchase via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, radius tekuk (min.): 9 mm, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Djdpfx Aksndn Agstokn Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility Dkjdpfxjnh R Eko Aktsn

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis aktuasi: listrik, Diameter pipa (maks.): 35 mm, Ketebalan dinding tabung (maks.): 2 mm, Sudut pembengkokan (maks.): 360 °, radius pembengkokan (maks.): 150 mm, radius tekuk (min.): 32 mm, berat keseluruhan: 28 kg, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. Dkedonfvx Nspfx Aktsn POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: 1018, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: manual, jenis aktuasi: listrik, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion Dodpfx Akonfvy Ujtskn • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: Dedpfeng Amkjx Aktjkn • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. Dkjdpfx Aong A R Sjktjn POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 8 mm, Sudut pembengkokan (maks.): 195 °, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for pipe diameters ranging from 15 to 100 mm, enabling the processing of complex geometries with standard bending radii of 2xD. Depending on material quality and wall thickness ratios, radii as tight as 1.5xD can also be reliably achieved in series production. The 120 mm tool height provides ample scope for special profiles. The highly precise and powerful electric drive of the bending axis, combined with the robust, rigid construction of both the mandrel holder and bending arm, ensures optimal bending results. Quick-change bending tools allow for rapid conversion to different pipe sizes. The clamping pressure for the pipe holder can be optimally adjusted. The PLC control (expandable via USB stick) comes with data storage and the latest X2X interface and can store virtually unlimited programs for bending angles, length dimensions, and rotation angles for up to 50 bending sequences per pipe length. An easily programmable database monitors springback values for up to 200 materials. The control has two operating modes: In 'Simple Bending', the length and twist of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is preloaded, and a continuous target/actual comparison is carried out during bending. Also available with pneumatic rotary stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemicals industry • Hydraulic piping • Metalworking • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel holder lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600–3200 kg (depending on configuration) • Ergonomic operation via safety foot switch Dksdpfxjnh R Sus Akton OPTIONAL ACCESSORIES: • Automatic minimal-quantity mandrel lubrication • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake function or via manual stops with foot switch • Semi-automatic length and rotation positioning via servomotors • Automatic tool retraction • Pipe calculation software • 10-inch touchscreen with integrated pipe calculation • Data transmission via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to trial production in our in-house demo room • Consultation and information meeting at your site • Consulting and handling of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. Dsdpfxjng Ax Ss Aktekn The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: sangat baik (bekas), Heavy-duty wooden pallets with 3 runners Accessible from 4 sides Length: 1680 mm Width: 1250 mm Djdpfol Uvv Tex Aktjkn Board thickness: 45 mm Weight: 82.5 kg Several units available

Kondisi: baru, Tahun pembuatan: 2026, Crank jack 10 tons – This is an exceptionally robust mechanical device designed for lifting heavy structures, machinery, and vehicles. Manufactured from damage-resistant steel, it ensures safety, stability, and long service life, even under the most demanding operating conditions. Ideal for railway, construction, and industrial applications. Advantages of the 10-ton crank jack: ✅ Load capacity of 10,000 kg – perfect for handling heavy machinery, structures, and vehicles. Dodpexqxwmsfx Aktskn ✅ Mechanical design – independent of any power supply, ready to work anywhere. ✅ High level of safety thanks to the ratchet system. ✅ Precise height adjustment enables accurate load positioning. ✅ High resistance to external factors – moisture, dust, vibrations, and low temperatures. ✅ Easy transport – compact dimensions and ergonomic design. ✅ Versatile application across various industries. Technical data MODEL MJ10 Rated load capacity: 10,000 kg Head width: 120 mm Base width: 140 (210) mm Total height: 795–1155 mm Lifting range (toe): 70–430 (30–390) mm Toe length: 80 (75) mm Body thickness: 73 mm Base length: 175 (170) mm Gearbox height: 330 mm Body width: 252 mm Gearbox axis distance: 185 mm Bracket length: 220 (280) mm Side housing length: 250 mm Net weight: 45 kg

Kondisi: bekas, We are offering a used drive-through scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Dkodpfx Aksy Ep Thjten Weighing platform dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICING Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACTS: Tanja Henkelmann Rainer Nürenberg Oliver Kopp TERMS OF PAYMENT Payment terms to be agreed upon in case of order. The price is per unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Vier gewinnt – The four pillars of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Tahun pembuatan: 1999, Kondisi: baik (bekas), Demag KBK overhead crane system crane runway approx. 20 x 6 m Rated load / lifting capacity: 1,000 kg - 1.0 t Technical data of the system: - Crane runway made of Demag KBK2 rails - Mounting height variable, chain length approx. 4 m System is supplied complete: - KBK rails, rail connectors - Travel trolleys, end plates, cable festoon system, brackets/suspension hangers, etc. Including double girder with Demag 1 t chain hoist Please note: The system is NOT electrically traversable as shown in the photos – without travel drives! Image shows the same system in 12x6m Shipping by freight forwarder possible, pickup preferred Dkodpect Dhyjfx Akten Demag KBK1, KBK2, and KBK3 rails are kept in stock! Shipping by truck (approx. 350 km radius): 450 EUR net Please inquire for other dimensions or shipping costs – we will provide you with a prompt, non-binding offer!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: MIKA Seilzüge, demag-dr-seilzug-en Dsdpfx Akjy D D S Sjtjkn