Beli Pinacho Bubut Tengah Dan Bubut Spindel bekas (7.747)

Kondisi: baik (bekas), drehmaschine-tos-trencin-001 Dsdpfsy Hxq Uox Aktokn

Kondisi: baru, Tahun pembuatan: 2026, OPTIturn TU 2004V – Lathe with Infinitely Variable Speed Control and Digital Speed Display Illustration shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precision Manufacturing Strongly ribbed, prism bed made of cast steel, induction-hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed spindle nose concentricity better than 0.009 mm Automatic longitudinal/lead screw feed With longitudinal, cross, and compound slides Forward-reverse switching via control panel Emergency stop slam switch Chuck guard Thrust bearing Lead screw supported in two sintered bearings Wide thread cutting range via change gear set Easy and quick speed change via V-belt Change gear transmission EMC filter class B (for use in private households) Equipment details: Digital speed display Clearly legible digital speed screen Chip guard on compound slide Dksdjcnxrcepfx Aktsn Four-way tool post rotatable Roll-threaded trapezoidal lead screw Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine graduation 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Taper roller bearings in P5 quality Cylindrical centering mount Hardened spindle nose with 21 mm spindle bore Lathe chuck Concentricity better than 0.04 mm Scope of delivery: 3-jaw chuck Ø 100 mm, self-centering Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-way tool post Change gear set Operating tools Model: OPTIturn TU 2004V Article No.: 3420310 Technical Data Electrical connection: 230 V / 1 Ph ~50 Hz Drive motor power, spindle: 600 W Spindle taper: MK 3 Spindle bore: 21 mm 3-jaw chuck through hole: 20 mm Tool post installation height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide diameter: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Speed steps: 2 steps, speed electronically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Pitch – metric: 0.25 – 3 mm/rev (14 pitches) Pitch – imperial: 44 – 8 TPI (12 pitches) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Kondisi: bekas, Tahun pembuatan: 1986, Swing over bed: 320 mm Swing over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Space required approx.: 1700x1000x1700 mm Digital display: 3-axis digital readout Bar capacity: Ø 40 mm Speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: metric 0.25 - 8 mm, inch 80 - 2 TPI, diametral pitch 200 - 5 DP, module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Dksdpoufud Djfx Aktjn Quick-change tool post Multifix: Type B

Kondisi: bekas, Tahun pembuatan: 1986, Swing over bed: 335 mm Swing over cross slide: 165 mm Turning length: 635 mm Total power requirement: 2.2 kW Digital readout: 3-axis digital readout Bar capacity: Ø 40 mm Spindle speed range: 30 – 2500 rpm Spindle nose: D1-4 Camlock Dodpoufud Rsfx Aktjkn Four-jaw chuck diameter: 200 mm Three-jaw chuck diameter: 200 mm Tailstock: MT 3 Approx. machine weight: 860 kg Approx. required space: 1700 x 1000 x 1700 mm Digital readout: Heidenhain Various accessories such as drill chuck for tailstock, tool holder, etc. The machine is in good condition.

Kondisi: bekas, Tahun pembuatan: 1991, technical-details-de Dkodpfx Akox D Ufmston

Kondisi: bekas, Tahun pembuatan: 1986, Technical details: Swing diameter over bed: 1000 mm Dsdpevgmlnefx Aktokn Swing diameter over cross slide: 745 mm Turning length: 3000 mm Spindle speed range: 4.5 – 900 rpm Spindle bore: 110 mm Workpiece weight between centres max.: 12,500 kg Total power requirement: 30 kW Machine weight approx.: 9 t Space requirement approx.: 5.2 x 2.3 x 2 m 3-axis digital readout Rapid traverse, top slide feed 350 mm 1 fixed steady rest 1 faceplate, dia. 1000 mm Coolant system

Kondisi: baru, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre Distance: 750 mm Centre Height: 165 mm Swing over Bed: Ø 330 mm Bed Width: 190 mm Cross Slide Travel: 160 mm Top Slide Travel: 90 mm Spindle Mount: DIN 55029 (Camlock) D 1 - 4 Spindle Bore: Ø 40 mm Max. Chuck Diameter: Ø 200 mm Spindle Speed, infinitely variable: 30 - 2000 rpm Mechanical Gear Stages: 3 Motor Power: 2.2 kW Longitudinal Feed Z: (40) 0.044 - 1.96 mm/rev Cross Feed X: (40) 0.022 - 0.98 mm/rev Metric Threads: (32) 0.4 - 7.0 mm Imperial Threads: (32) 4 - 56 TPI Module Threads: (32) 0.4 - 7.0 Diametral Pitch Threads: (32) 7.5 - 112 Tailstock Quill Diameter: Ø 40 mm Tailstock Quill Taper: MT 3 Quill Travel: 100 mm Lateral Adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance certificate according to DIN - Precision, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant machine beds made from MEEHANITE quality cast iron, stress-relieved and heavily ribbed for maximum smooth running - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC and German documentation and service Standard Equipment (Standard Accessories): - Machine base with splash protection back wall Dkjdpfjir Igwox Akten - 3-jaw lathe chuck - 4-way tool post - Foot pedal with mechanical brake system - Coolant system - Chuck guard and spindle cover conforming to European CE safety standards - 1 Fixed centre for main spindle - 1 Fixed centre MT3 - 1 Inspection certificate - Safety equipment and electrical system according to CE - Reducing sleeve for main spindle - Operating tools Available Options for this Lathe: - 3-axis digital readout - Multifix quick-change tool post system Also available as a geared head version

Kondisi: baru, TC 180 x 1000 V Distance Between Centers: 1000 mm Center Height: 178 mm Swing Over Bed: Ø 356 mm Bed Width: 190 mm Cross Slide Travel: 160 mm Top Slide Travel: 90 mm Spindle Mount: DIN 55029 (Camlock) D 1 - 4 Spindle Bore: Ø 40 mm Max. Chuck Diameter: Ø 200 mm Spindle Speed, Infinitely Variable: 30 – 2500 rpm Mechanical Variator Stages: 3 Motor Power: 2.2 kW Longitudinal Feed Z: (40) 0.044 – 1.96 mm/rev Cross Feed X: (40) 0.022 – 0.98 mm/rev Metric Threads: (32) 0.4 – 7.0 mm Imperial Threads: (32) 4 – 56 TPI Module Threads: (32) 0.4 – 7.0 Diametral Threads: (32) 7.5 – 112 Tailstock Quill Diameter: Ø 40 mm Dkjdpjir Imyjfx Akten Tailstock Quill Taper: Morse Taper 3 (MT3) Quill Travel: 100 mm Lateral Adjustment: ± 10 mm Weight approx.: 750 kg Dimensions approx.: 1880 x 880 x 1390 mm Features: - Factory acceptance certificate according to DIN - Precision-hardened & ground guideways - Robust headstock with oil-circulation lubrication, precision spindle bearings, gears hardened and ground for long-term quality - Electromagnetic spindle brake (TC), frequency inverter with electrical braking (V-models) - Torsion-resistant machine beds made of MEEHANITE quality cast, stress-relieved and heavily ribbed for utmost running smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Impulse switch for main spindle - CE / IEC compliant with German documentation and local service Standard Equipment (Basic Accessories): - Machine stand with splash guard rear panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical brake - Coolant system - Chuck and spindle guard according to European CE safety norms - 1 fixed center for main spindle - 1 fixed center MT3 - 1 inspection certificate - Safety devices and electrical setup in compliance with CE - Reduction sleeve for main spindle operating tools Available Options for this Lathe: - 3-axis digital readout - Quick-change tool post system Multifix Also available with gearbox variants

Kondisi: baru, Made in Italy Machine manufactured to DIN 8606 Center height: 260 mm Swing over bed: 520 mm Swing over cross slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 – 1,600 rpm (Option: 11 – 2,000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Z-axis feed: (93) 0.028 – 6.43 mm/rev X-axis feed: (93) 0.012 – 2.73 mm/rev Metric threads: (54) 0.5 – 224 mm Djdpfx Akodvm Eujtokn Whitworth threads: (55) 72 – 1/8 TPI Module threads: (54) 0.5 – 112 mm Diametral pitch threads: (54) 64 – 1/4 D.P. Cross slide (LxW): 650 x 230 mm Cross slide travel: 340 mm Top slide (LxW): 350 x 150 mm Top slide travel: 150 mm Tailstock quill diameter: 85 mm Tailstock quill travel: 200 mm Tailstock taper: MT 5 Weight: approx. 3,100 kg Equipment: - Pneumatically-assisted tailstock movement - Acceptance certificate to DIN 8605, high-precision lathe - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment with quality-brand components, e.g. Siemens/Schneider - Ways lubrication via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass screen, micro-switch secured. Tool post guard with plexiglass screen. Full-length rear splash guard. Leadscrew and feed shaft protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant system - Fixed steady rest - Travelling steady rest - Operating tools, acceptance certificate to DIN, operating and maintenance manual, complete electrical installation, lathe built according to the latest CE standard revision.

Kondisi: bekas, technic_details_001 Dsdpfowa I Shjx Aktokn

Kondisi: bekas, Tahun pembuatan: 1999, Technical Details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MK3 Spindle torque: 350 Nm Max. workpiece weight – between centers: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions (LxWxH) approx.: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal carriage X-travel: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Cross slide Y-travel: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Top slide swiveling right 60° and left 120° Thread cutting Machine lighting Dodpeu Ixw Aefx Aktskn No coolant system (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Centre distance: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1250 / 32-1600 / 36-1800 – 18 steps rpm Feed rate: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Dksdpfx Aeu Ixznskton Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed rate 0.015 – 2.8 mm (limit switch coupling not functional, manual shut-off required) Top slide with 4-way tool post Steel plate Ø 705 mm with offset threaded holes *

Kondisi: bekas, Tahun pembuatan: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel Z-axis, flat: approx. 500 mm Cross slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-axis: longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-axis: cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Dkedpfxju Tq U Is Aktjn Face plate Ø 1000 mm 4-way toolpost Steady rest Ø 250 closed Accessories: Four-jaw chuck Ø 630 mm

Kondisi: bekas, Tahun pembuatan: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Center height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20-step Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill stroke: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions (LxWxH) approx.: 2.0 x 0.8 x 1.4 m Thread cutting possible: Metric, Whitworth, and Module threads Equipment: - 2-axis digital readout VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change tool post Dkedpfxjva Erts Akton - Foot brake - Coolant pump (supply not included)

Kondisi: bekas, Technical details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Djdpju Ixy Dsfx Aktjkn Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety guard BxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant unit (without feed)

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Swing over bed: 630 mm Swing over cross slide: 320 mm Turning length: 2800 mm Dksdpfxju Ix A Ej Aktjn Distance between centers: 2800 mm Swing in the gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. LxWxH: 4.7 x 1.5 x 1.5 m Thread cutting possible Accessories: 4-jaw chuck Various centers Gears Jaws and small parts Steady rest *

Kondisi: bekas, Tahun pembuatan: 2016, Technical Details: Swing over bed: 402 mm Swing over cross slide: 245 mm Djdpfx Aovav Sdektskn Turning length: 1000 mm Distance between centres: 1000 mm Centre height: 200 mm Faceplate swing diameter: 560 mm (with gap) Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper: ISO MK4 Tailstock quill stroke: 180 mm Total installed power: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.4 x 1.0 x 1.7 m The lathe is not equipped with rapid traverse. Axis positioning: 2 axes Read-out: Pinacho Lathe Controller Multifix tool holder with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Kondisi: bekas, Tahun pembuatan: 1975, Technical Details: Dksdov A Sqhjpfx Akten Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height (measured in bed): 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 – 2240 rpm, 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev, 32 steps Cross feeds: 0.02 – 0.71 mm/rev, 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Machine dimensions (LxWxH): approx. 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation), available free of charge in Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with internal/external jaws, rated for 2000 rpm Thread cutting: metric, module, imperial threads Chip guard Chuck guard (mechanical) MULTIFIX tool post with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection device Machine feet UVV safety preparation complete

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length (face/longitudinal): face: 165 mm / cross: 160 mm Center height over bed: 200 mm Gap length: no gap mm Speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Dodpsu Ixydsfx Aktskn Feeds: longitudinal: 0.021...2.34 mm/rev / cross: 0.09...1.6 mm/rev Tailstock quill taper: MT 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal jaws - Multifix quick-change tool post - Foot brake - Coolant pump (delivery line not included)

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Dsdju Ix D Ajpfx Aktskn Swing diameter over bed: 420 mm Swing diameter over support: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Dsdpfxju Ix Hde Aktokn Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Dksdpfx Aou Ix Hqjkten Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, Tahun pembuatan: 1963, Technical specifications: Swing diameter over bed: 1,000 mm Swing diameter over cross slide: 620 mm Turning length: 3,150 mm Centre distance: 3,150 mm Swing diameter in gap: 1,200 mm Gap length: 800 mm Dedpfsu Ix Arjx Aktekn Machine weight approx.: 11.5 t Approximate machine dimensions (LxWxH): 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Kondisi: bekas, Tahun pembuatan: 1974, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross-slide: 300 mm Turning length: 2100 mm Distance between centers: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse X-axis: carriage 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g., metric, module, and inch threads Rapid traverse on cross-slide Chuck guard 2x chip trays Accessories: (see comparable on photo) 2x steady rests (1x closed, 1x open) Face plate Dedpfx Aeu Ix Dcsktjkn 3-jaw chuck Jaw sets Flange Centers Various gears

Kondisi: bekas, Tahun pembuatan: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 – 1,400 rpm / 12 steps Feed range, x-axis: longitudinal: 0.08 – 1.10 m/min Feed range, y-axis: cross: 0.028 – 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Approx. machine dimensions LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix quick-change tool post - Coolant system with pump - Chuck guard Dkjdpfou Ix E Hsx Akton - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears