Van pengangkut mobil

MAN TGL 8.180 + winch + MANUAL + EURO 5 + system wo...

Kondisi: baru, en-GB Cutting diameter: 355 mm Saw band dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20–80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Connected load: 400 V Total power requirement: 2.2 kW Machine weight approx.: 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic mitre band saw - Mitre cuts up to 45° left and right Tedpfsmhm Aqox Adced - Mitre cuts up to 60° right - Vice with quick-release mechanism - Band tension control via manometer - Electric automatic coolant system

Kondisi: bekas, Tahun pembuatan: 1986, Cutting diameter: 460 mm Saw band length: 5334 mm Cutting width: 1.3 mm Square cutting range: 320 x 320 mm Flat cutting range: 500 x 320 mm Control unit: minipos 807 Cutting speed: 16 – 80 m/min Saw blade dimensions: 5334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Tedpfx Adetqqrfscsd Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: roller conveyor 4150 mm long, roller conveyor 2150 mm long, bundle clamping device, chip conveyor, coolant system

Kondisi: sangat baik (bekas), jarak tempuh: 63.297 km, pendaftaran pertama: 08/2006, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, rem: retarder, warna: merah, kelas emisi: Euro 3, Perlengkapan: ABS, kendali jelajah, pendingin udara, pengaturan jendela elektrik, retarder, spion elektrik,

Kondisi: siap digunakan (bekas), A combined heat and power (CHP) plant, consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20. Generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1,500 rpm. Includes DELF synchronization, hot water outlet, table cooler, preheating, and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20. Generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1,500 rpm. Includes DELF synchronization, hot water outlet, table cooler, preheating, and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12. Generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1,500 rpm. The CHP unit has a total output of approximately 1,100 kVA. Includes table cooler, V2A heat exchanger, containers, and switch cabinets. All generators are installed in containers, allowing for easy transport. Tjdstwqzrjpfx Adced

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fuel: natural gas (NG), Engine: HMG, Space heating unit with CHP: yes, Condensing boiler: no, Auxiliary heater: no, Low-temperature boiler: no, B11 boiler: no, Combination unit: no, Rated heat input P: 88 kW, Annual efficiency of space heating system η: 136%, Energy efficiency class: A++, Usable heat output at rated heat input with auxiliary heater off/on: 87.9 kW, Thermal efficiency at rated heat input with auxiliary heater off/on: 57.5%, Electrical efficiency at heat output of space heating unit with CHP with auxiliary heater off/on: 33.5%, Auxiliary power consumption at full/partial load el: 1.132 kW, Standby power consumption P SB: 0.06 kW, Standby heat loss P stby: 0.442 kW, Annual energy consumption Q HE: 1345 kWh, Sound power level indoors L WA: 72 dB, Operating hours: 42,892 h. Water was detected in the oil circuit, the unit has an oil-related fault even though there is sufficient oil present, it also shuts down with the message 'Engine too hot'. The control unit was overhauled by the manufacturer in 2024. Regular maintenance intervals were observed for oil changes, spark plugs, valves, etc. Documentation available. Tjdjxc Ni Rjpfx Adcsd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Refrigeration Unit Brand: Ers Model: SC 110.V/5 Power: 8 kW Year of manufacture: 2000 Tsdpfsd I Tlhjx Adcsd

Tahun pembuatan: 2023, jam operasional: 1 h, Kondisi: baru, nomor mesin/kendaraan: MANUWASH3128, de Tjdpfxed Tg Nnj Adcsd

Kondisi: bekas, Tahun pembuatan: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Machine weight approx. 0.5 t O F F E R Todew Dvivspfx Adced We are pleased to offer you, subject to prior sale and errors excepted, the following from stock without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS III-S-PV Year of manufacture 1989 _____ Max. saw blade Ø 320 mm Cutting capacity: Tubes approx. 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm Note: Smaller cutting dimensions may apply for mitre cuts Up to max. 140 mm Blade stroke manually vertical approx. 200 mm Saw blade speeds 17–34 rpm Saw drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Saw carriage feed manually via long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip tray • Roller conveyor material infeed approx. 2,000 mm • 2 spare saw blades Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/frame/cold circular) saws in stock. Further sawing machines available at all times – please enquire with us.

Kondisi: bekas, Tahun pembuatan: 1975, nomor mesin/kendaraan: 12138/4, Rated power: 20 kVA Reach: 250 - 600 mm Electrode arm spacing: 270 mm Welding capacity steel: approx. 2.5 + 2.5, max. 3.5 + 1.5 mm Tedpfx Adjb Nvimecsd Electrical connection: 380 V kW Required space: 470 x 1170 x 1300 mm Weight: 210 kg

Tahun pembuatan: 1993, Kondisi: bekas, nomor mesin/kendaraan: 8479307014, Load capacity: 300 kg Lifting height: 10,100 mm Weight: 895 kg Tsdpfx Asbh Uc Sjdcod Required space: 1,100 x 2,250 x 2,550 mm