Crane yang terpasang pada truk

MAN TGX 26.440 * FASSI F455A.2.26E + FUNK + Anhänger

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 831 h, Perlengkapan: ABS, Doosan DX 55-9C * Operating weight: 5.5 t * Transport length: 5.85 m * Transport width: 1.88 m * Transport height: 2.56 m * Bucket capacity (min.): 0.18 m³ * Track width: 400 mm * Operator protection: Kb Ihjdpfsullmdjx Aa Nst * Reach: 6.15 m * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * Gross vehicle weight: 5,500 kg * Engine: 41 kW / 56 hp * Blade support

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. Ihjdpfxofz U S Eo Aa Not - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: siap digunakan (bekas), Peralatan terdiri dari: 1 - Menara decoiler dengan 4 decoiler (AG 3000 a) kapasitas per decoiler: 3 ton panjang lengan: 1350 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 2 - Selektor gulungan (MT-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi Iodpfjxqh Saex Aa Noht 3 - Unit perata (RM-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 4 - Unit pemotongan (TS 1250 + KST-2) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 5 - Gunting Schechtl untuk pemotongan presisi dengan kontrol CNC Siemens Touch 1250 x 2 mm

Kondisi: baru, Tahun pembuatan: 2025, lebar total: 1.000 mm, panjang total: 1.600 mm, tinggi total: 950 mm, daya: 1,5 kW (2,04 hp), Rollformmaschine für Dachpaneele F3-27 mit Clip-Relief Die Dachpaneel-Rollformmaschine F3-27 mit Clip-Relief, entwickelt von der LLC “Evolutioner”, ist für die Herstellung von Doppelfalzprofilen aus Metall für Stehfalzdächer konzipiert. Stehfalzdächer sind weit verbreitet im Bau verschiedenster Gebäude und Strukturen sowie bei der Sanierung historischer Bauten und Architekturdenkmäler. Das Stehfalzprofil verleiht dem Dach ein attraktives Aussehen und betont dessen Einzigartigkeit und ästhetisches Design. In der modernen Architektur werden Stehfalzpaneele häufig zur Fassadengestaltung eingesetzt. Die Dachprofiliermaschine F3-27 ermöglicht das Abcoilen von Dachpaneelen in beliebiger Länge; die Rollformlänge ist unbegrenzt. Die Maschine ist relativ leicht, was ihren Einsatz direkt an der Baustelle ermöglicht und die Formung der Paneele vor Ort erlaubt. Somit entfällt der Transport der fertigen Dachpaneele von der Werkstatt zur Baustelle, was das Risiko von Transportschäden minimiert und Transportkosten einspart. Technische Daten: - Profilierlänge: unbegrenzt - Umformstufen: 7 - Profilhöhe (mm): 27 Die Metall-Dachpaneelmaschine F3-27 ist mit einer einfach justierbaren Breitenverstellung ausgerüstet, die schnelle Anpassungen der Paneelbreite über ein spezielles Handrad erlaubt. Als optionale Zusatzausstattung für die F3-27 Rollformmaschine sind erhältlich: Ihedpfx Ajp Stgnja Net - Querschneidmesser - Längenmesssystem - Sickenwalzen - Radiuswalzen - Falzzangen für Stehfalz - Elektrische Falzmaschine ESM-1 - Formvorrichtung für Gleitklammern - Formvorrichtung für Festklammern - Abwickelhaspel - Riffelplatten-Profiliermaschine RPFM - Automatische Schere mit Steuersystem Die portable Dachpaneelmaschine F3-27 verfügt über sechs Walzenpaare zur Herstellung eines Profils mit 27 mm Höhe sowie einen Zusatzstand zur Clip-Relief-Umformung. Der Clip-Relief ist ein spezieller Bördel am Paneel, um Gleit- oder Festklammern unsichtbar unter dem Profil zu platzieren. Diese Klammern dienen zur Befestigung der Dachpaneele am Dachunterbau. Zusätzlich stellen wir folgende Maschinen für Metalldachpaneele her: - Stehfalz-Dachprofiliermaschine F3 - Dachpaneelmaschine F3-9 mit Clip-Relief - Snap-Lock-Dachpaneel-Rollformmaschine SL-1 - Automatisierte Snap-Lock-Dachpaneelmaschine SL-1 auto

Kondisi: baru, Table width 3000 mm Table length 1500 mm Number of torch heads 1 CNC control system Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shutdown in case of collision * Machine installation or relocation via plug & play with forklift, pallet truck, or crane * 3-sided access to the cutting area thanks to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. Oxy-fuel cutting technology is required for cutting workpieces up to 150 mm. The workpiece support frame is equipped with interchangeable flat steel slats, 3 mm thick, mounted at a 45° angle. The spacing between the slats is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and underwater * Recommended cutting range: 0.5 to 40 mm * Maximum piercing thickness 30 mm, higher with ProPierce Technology * Marking, notching, and center punching also on coated metal materials * Inverter power source with digitally controlled, fully electronic process sequence * Integrated cooling system with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: Integrated CAD/CAM module in the machine control system TEKA EcoCube 5.5 kW Extraction Unit: Filtering medium: dry, grease-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Current type: 3Ph+N+PE Fan installation: integrated in the system, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Suction nozzle: NW 250 mm via suction duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm Equipment color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special Equipment: Iedpfxjpm U U Ns Aa Noht - Closure hooks and toggle latches - Compressed air connection and condensate drain, each fitted with bulkhead fitting - Compressed air connection with hose nozzle d=8mm - System equipped with grounding studs - Cables in UL version - EATON frequency inverter mounted on the left in the control cabinet

Tahun pembuatan: 2020, Kondisi: baru, The Sapphire is the optimal solution for heavy industry when processing material thicknesses up to 200 mm. It enjoys great popularity among a wide range of manufacturing companies—often in three-shift operations—as well as in all application areas where stability, efficiency, and process reliability are of utmost importance. Thanks to its high-quality configuration, the system serves as a universal tool for the highest demands and a valuable asset in process optimization. Now in use in more than 400 industrial operations worldwide, the Sapphire cutting system proves its worth day after day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V7 - Extraction table 3000 x 6000 mm Ihjdpfef Ak N Rjx Aa Not - PFC 6 extraction system including extraction ducts - Delivery, installation, and commissioning Key Features • High dynamics and precision in automated 2D & 3D cutting of sheet metal, tubes, and profiles • Plate processing up to a material thickness of 200 mm • Comprehensive cutting database for optimal operator convenience • Designed to meet the highest demands under the toughest multi-shift conditions General Technical Data Drive: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Worktable height: 740–760 mm Ambient operating temperature: +5 °C to +45 °C Ambient humidity: max. 90%

Kondisi: baru, Tahun pembuatan: 2025, en-GB: The Forstner POWER STRAIGHT PRO is the heavy-duty version of the STRAIGHT PRO. Even more massive straightening rollers ensure perfect levelling results, even with thicker sheets. The straightening unit with its six rollers is easy to adjust and guarantees flat blanks for further processing, regardless of material type. Key advantages: Very robust construction 6 straightening rollers with automatic adjustment Perfect levelling results User-friendly operation Standard equipment: Infeed roller hopper Feed table Cross-cutting guillotine Ihjdpfsurtg Sjx Aa Njt Touchscreen control Speed: 25 m/min Max. straightening and cutting capacity: 2.00 mm at 400 N/mm² or 1.5 mm at 600 N/mm² Optional: working width of 1524 mm also available

Kondisi: baru, Product Description: Iedpody Ewljfx Aa Noht Conveyor systems are among the most crucial components used in automated coating lines. Our conveyors play a key role in transporting the parts to be coated, moving them over meters per day and kilometers per year. Heavy parts to be coated are conveyed by belt systems that, thanks to their durable bearings and cast steel chains, are designed for years of reliable operation. The load capacity ranges from 120 kg up to 2 tons. • The operating principle of this conveyor type is based on transferring suspended materials by means of chains and trolleys, which run along an NPI-profile rail powered by a drive unit. • WEBB-type conveyor chains are made from spheroidal graphite cast iron or forged steel and subsequently heat-treated. • Special roller bearings for trolleys can operate at temperatures up to 200°C. Lubricating greases applied to the trolley bodies ensure proper system lubrication. • The drive system can be designed either based on a caterpillar drive system or a gear drive system, both equipped with safety switches and moving trolleys. • The conveying speed can be easily adjusted using a frequency inverter. • The chain tensioning system consists of slides and springs. Rollers and support wheels are used for belt redirection points.

Kondisi: bekas, Tahun pembuatan: 2023, 9676 Ijdowiqriopfx Aa Neht

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 4.000 kg, tinggi angkat: 6.352 mm, jenis bahan bakar: listrik, panjang garpu: 1.200 mm, warna: merah, berat muatan maksimum: 4.000 kg, capacity: 4000 kg mast: 6352 mm Triplex drive: electric Ihjdpjt E Sm Rjfx Aa Net Ref. 112725