Forklift off-road

Manitou M50.4 ST5

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M50-4, Tahun pembuatan: 2025, kapasitas angkut: 5.000 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.865 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.910 mm, panjang garpu: 1.200 mm, berat kosong: 8.325 kg, panjang total: 4.948 mm, jenis penggerak: Diesel, lebar konstruksi: 2.080 mm, Rough terrain forklift Chassis number: M50-4 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter, all-wheel drive Condition: New machine Technical condition: New Front tire type: Solid rubber Front tire size: 445/70R22.5 Front tire condition: New Rear tire type: Solid rubber Rear tire size: 340/80R18 Rear tire condition: New Description: 12 months factory warranty / Max. 2,000 operating hours 3rd valve, 4th valve, rear work light, front work light, particulate filter, road approval (StVZO), fully enclosed cab, full free lift, CE certificate, exterior mirror, warning beacon, LED, seat, Redpfx Amowmty Rouou 3rd and 4th hose routing to carriage, halogen beacon, reverse alarm, mast tilt-lock valve

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW Redpjwvqklefx Amueu • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 1 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.850 mm, pusat beban: 600 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.870 mm, daya: 55 kW (74,78 hp), produsen motor: Deutz, lebar kerangka garpu: 1.676 mm, panjang garpu: 1.200 mm, lebar garpu: 150 mm, ketebalan garpu: 50 mm, Tipe ban depan: ban pneumatik (berisi udara), ukuran ban depan: 18-22.5 MPT-06, tipe ban belakang: ban pneumatik (berisi udara), ukuran ban belakang: 340/80 R18 XMCL, berat keseluruhan: 8.436 kg, tinggi total: 2.490 mm, panjang total: 4.950 mm, lebar total: 2.080 mm, warna: merah, Perlengkapan: Penandaan CE, garpu palet, geser samping, kabin, pelindung depan, pelindung kepala, pencahayaan, penggerak semua roda, === IMPORTANT SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 1 h Max. load capacity: 5,000 kg Max. lifting height: 5.50 m Mast type: Triplex Fork length: 1,200 mm Sideshift: Yes Drive: Diesel Transmission: Torque Converter Cab: Enclosed Heated cab: n/a Tyres: Pneumatic (All-terrain) Stabilizers: No Engine manufacturer: Deutz Emission standard: Stage V Redpfx Ajy D Hi Hemueu Weight: 8,436 kg CE certification: Yes === HIGHLIGHTS === ✔️ Triplex mast 5,500 mm ✔️ Sideshift ✔️ Brand new machine ✔️ 55 kW Deutz Stage V engine ✔️ Load capacity 5,000 kg ✔️ All-terrain specification ✔️ Immediately available for use === CONDITION === Like new condition Fully inspected and immediately operational === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide shipping available Price on request (EXW / plus VAT) New rough terrain forklift for heavy-duty applications in construction, logistics, and industry. Equipped with triplex mast and sideshift for maximum flexibility and efficiency. All machines are fully inspected, CE certified, and ready for immediate use. === DELIVERY === Crane loading available on request Flexible transport solutions depending on destination Professional handling by Collé Rental & Sales

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 1.330 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.765 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.910 mm, daya: 55 kW (74,78 hp), panjang garpu: 1.200 mm, berat kosong: 7.760 kg, panjang total: 3.748 mm, jenis penggerak: Diesel, lebar konstruksi: 2.080 mm, All-terrain forklift Load center: 500 mm Fork width: 150 mm Fork thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tyre type: Pneumatic Front tyre size: AS 340/80 R18 Rodsn Hcw Dspfx Amuou Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre size: AS 18-22.5 163A8 Rear tyre condition: 80 - 100% Description: The M 50-4 all-terrain forklift is designed for operations in challenging terrain or areas with obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures excellent maneuverability under all conditions. A wide selection of tyres is available to adapt to various surfaces, optimizing your productivity. The suspended cab, accessible from both sides, offers a spacious operator station with ergonomic controls. The elevated driving position provides 360° panoramic visibility for enhanced safety for the operator and the surroundings. Sideshift, 3rd valve, full cab, CE certificate, - Service booklet - CE declaration - Operator's manual - Spare parts manual

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Filter untuk ekstraksi debu dan serbuk gergaji. Redpfetzld Uox Amuou

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 2.190 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.765 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.910 mm, daya: 55 kW (74,78 hp), lebar kerangka garpu: 1.670 mm, panjang garpu: 1.200 mm, berat kosong: 7.760 kg, panjang total: 3.748 mm, jenis penggerak: Diesel, lebar konstruksi: 2.080 mm, Rough Terrain Forklift Load Centre: 600 mm Fork Width: 150 mm Fork Thickness: 60 mm Rjdpfxow Rhb Aj Amueu ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Triplex Transmission: Torque Converter Speed Class: 20 Technical Condition: Normal Front Tyres Type: Pneumatic Front Tyres Size: AS 340/80 R18 Front Tyres Condition: 80 - 100% Rear Tyres Type: Pneumatic Rear Tyres Size: AS 18-22.5 163A8 Rear Tyres Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for operations in challenging terrain or areas with obstacles. With four driven wheels and a ground clearance of 43 cm, this forklift ensures excellent manoeuvrability under all conditions. A wide range of tyre options is available to adapt to different ground surfaces, optimising your productivity. The suspended cab, accessible from both sides, offers a spacious operator station with ergonomic controls. The elevated driving position provides a 360° panoramic view for increased operator and workplace safety. Sideshift, 3rd valve, 4th valve, heater, full cab, CE certificate, Service book, CE declaration, operator's manual, spare parts manual.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 20 h, kapasitas angkut: 8.000 kg, tinggi angkat: 4.800 mm, pengangkatan bebas: 1.570 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.780 mm, daya: 59 kW (80,22 hp), lebar kerangka garpu: 2.240 mm, panjang garpu: 2.400 mm, berat kosong: 12.406 kg, jenis penggerak: Diesel, Diesel forklift Load centre: 600 mm Fork width: 180 mm Fork thickness: 75 mm ISO class: Terminal West Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: New machine Technical condition: New Front tyre type: Super elastic Front tyre condition: New Rear tyre type: Super elastic Rear tyre condition: New Rjdexr R Efopfx Amuju Side shifter, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, full free lift, CE certificate, interior mirror, exterior mirror, beacon, seat, front and rear camera

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Gergaji pita PRIMULTINII model SIF 1600 dalam kondisi kerja yang sangat baik. Redpfxeyha A To Amuju

Kondisi: bekas, Tahun pembuatan: 2020, Max. workpiece length 6360 mm Milling spindle: 1 unit Main motor: 13 kW CNC control SCM CNC machining center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window profiling on request!): Wooden windows IV 68, 78, 92 Wooden windows "classic style" Wood-aluminum windows Front doors Lift-slide doors Box-type windows Machine can still be inspected in operation! Technical summary (detailed description available on request!): ----- - Working area X-Y= 6360x1905 Z=350 - Automatic table with 8 carrier rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP setting - self-calibration system for Prisma machining unit - Chip removal device on the electrospindle, adjustable - Prepared for right-angle head "Prisma T-S" - BRC machining unit: saw blade for end machining, 1 port for cutter, vertical 3 vertical, independent drilling heads, center distance 32 mm 3 vertical drilling heads (not independent), center distance 21.5 mm, for lock hole drilling 4 horizontal drilling heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per side) - TRC 48 - rear tool magazine 48 tool positions (tool holders excluded) Center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total magazine load: 250 kg - MACH 5 - quick-change device: enables tool change on the electrospindle in just a few seconds. - Pendulum operation - Automatic axis lubrication - eye-M operator console with integrated PC - Additional fixed control panel - TECPAD - remote control for machine functions - Clamp jaw preparation H145 for worktable with 8 carrier rails - Front stop row H110 for worktable with 8 carrier rails - Rear stop row H110 for worktable with 8 carrier rails - Suction cup H110 145x145 mm - Suction cup H110 145x55 mm, rotatable - Suction cup H110 180x65 mm, rotatable - First side stop row H145 for worktable with 8 carrier rails - Second side stop row H145 for worktable with 8 carrier rails - Clamps H145 with round base - Clamps H145 with square base - No. 6 double-stroke lifting devices H145 - Laser and reference stop H145 for arches (left side) - PRO-SPEED safety system - Maestro cnc - user and programming interface - Maestro pro view – simulation software Sale of tools in the condition, scope, and with accessories as available in our warehouse. Note regarding window profiling, tool drawings, tool system listings: Engelfried GmbH assumes no liability that the tools actually available correspond with the mentioned and illustrated systems. Rsdpfx Aey Hl Iyomuju (technical data according to the manufacturer – subject to verification!)

Tahun pembuatan: 1900, Kondisi: bekas, Mesin A2/35“ bekas. Diameter minimum 80 mm, maksimum 900 mm. Panjang batang minimum 180 cm. Rjdpewqmyfsfx Amuju Harga berlaku untuk mesin dalam kondisi saat ini. Rantai pengumpan dan sprocket dapat diperbarui atau disediakan oleh kami dengan biaya tambahan.