Telehandler

Manitou MT 730H

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 3.000 kg, tinggi angkat: 6.900 mm, panjang total: 5.920 mm, - Max. lifting capacity: 3,000 kg - Max. lift height: 6.90 m - Maximum lateral reach: 4 m - Tilt angle: 11° - Dump angle: 116° - Turning radius (over wheels): 3.33 m - Transmission type: Hydrostatic - Standard tyres: ALLIANCE 380/75 R20 148A8 A580 - Number of gears (forward / reverse): 2 / 2 - Max. travel speed: 24.90 km/h - Parking brake: Hydraulic - Steering wheels (front / rear): 4 / 4 - Safety cab approval: ROPS - FOPS Level 2 - Lifting time: 9.42 s - Lowering time: 7.53 s - Telescope extension: 7.43 s - Telescope retraction: 9.36 s - Tilt forward: 3.21 s - Tilt backward: 2.15 s Gbsdpfoxd H Awox Agdjw - Engine emission standard: Stage V - Engine model: V3307-CR-TE5B - Number of cylinders / cylinder capacity: 4 – 3,331 cm³ - Rated engine output – Power (kW): 55.92 kW / 54.60 kW - Max. torque / engine speed: 265 Nm @ 1,400 rpm - Tractive force: 3,860 daN - Number of gears (forward / reverse): 2 / 2 - Max. travel speed: 24.90 km/h - Parking brake: Hydraulic - Pump type: Gear pump - Hydraulic flow rate / hydraulic pressure: 88 l/min / 245 bar - Engine oil: 11 l - Hydraulic oil: 115 l - Fuel tank capacity: 90 l - Sound level in cab (LpA): 74 dB - Ambient noise (LwA): 103 dB - Hand/arm vibration exposure: < 2.50 m/s² - Steering wheels (front / rear): 4 / 4

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 2.500 kg, tinggi angkat: 5.850 mm, panjang total: 5.145 mm, ・Maximum lateral reach: 3.40 m ・Breakout force with bucket: 3427 daN ・Dump angle: 12° ・Bucket rollback angle: 117° ・Turning radius (over wheels): 3.31 m ・Operating weight (with forks): 4800 kg Gbjdjztgl Depfx Agdew ・Tyres: Pneumatic ・Lifting time: 8 s ・Lowering time: 5.40 s ・Telescopic boom extension: 5.60 s ・Telescopic boom retraction: 4.30 s ・Tilting in: 3.50 s ・Dumping out: 3.60 s ・Number of cylinders / Cylinder displacement: 4 - 3331 cm³ ・Rated output (internal combustion engine): 75 Hp / 55.40 kW ・Max. torque / engine speed: 265 Nm @ 1400 rpm ・Tractive force: 3550 daN ・Number of gears (forward / reverse): 2 / 2 ・Max. travel speed: 24.90 km/h ・Parking brake: Automatic negative parking brake ・Service brake: Oil-immersed disc brakes on front axles ・Pump type: Gear pump ・Hydraulic pressure: 235 bar ・Engine oil: 11.20 l ・Hydraulic oil: 115 l ・Fuel tank capacity: 63 l ・Noise level in cab (LpA): 76 dB ・External noise (LwA): 104 dB ・Hand/arm vibration exposure: < 2.50 m/s² ・Steering wheels (front / rear): 2 / 2 ・Drive wheels (front / rear): 2 / 2 ・Safety / Cabin certification: Standard EN 15000 / Cabin ROPS - FOPS Level 1 ・Controls: JSM

Kondisi: baru, Tahun pembuatan: 2026, en-001 Gbsdpeyx D Dwjfx Agdow

Kondisi: bekas, Tahun pembuatan: 2010, jam operasional: 504 h, daya: 10 kW (13,60 hp),

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm Gsdpfx Agou Et Nbedjbw - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Brand: Oerlikon / SAF Model: LP100 Year: 2009 Type: Self-aligning / Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm Rotation speed: 100-1200 mm/min Wheel width: 235 mm Wheel diameter: 450 mm Travel wheel distance: 1930 mm between flanges Travel speed: 4 m/min Equipped with wired remote control with buttons for rotation direction, speed variator, and rotator travel. Power: Three-phase 380V Gbodpfx Aelffdyogdjw Supplied with manual and CE certificate.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 697 h, kapasitas angkut: 6.000 kg, tinggi angkat: 29.900 mm, jenis bahan bakar: diesel, tinggi konstruksi: 3.100 mm, berat kosong: 21.800 kg, jenis penggerak: Diesel, lebar konstruksi: 2.500 mm, Teleskopstapler_drehbar_2024-06-27 Gsdpfjzb R Uyjx Agdjbw

Kondisi: baik (bekas), NHH lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Gsdpfx Agjqgdkiodjbw Dimensions: 150x85x155 cm (LxWxH)

Kondisi: bekas, jenis bahan bakar: diesel, Perlengkapan: pendingin udara, Sistem AdBlue: Ya Tahun Pembuatan: 2018 Jam Operasi: 7.882 Penggerak: Roda Berat Kosong: 19.580 kg Merek Mesin: Isuzu Kecepatan Maksimum: 35 km/jam Hubungi Kristoff Van Havere untuk informasi lebih lanjut. = Opsi dan Aksesori Tambahan = - AdBlue - Lengan dengan katup pemutus pipa -> Katup pemutus pipa pengaman - Lengan/Winch - Kopling cepat otomatis/hidraulik - Sistem pelumasan otomatis -> Sistem pelumasan otomatis - Sakelar pemutus baterai - Sistem hidraulik untuk lereng Gbedpjza Rn Rjfx Agdew - Kabin bertekanan - Suspensi batang - Sistem hidraulik untuk palu/gunting - Bucket tinggi dengan katup pemutus pipa -> Katup pemutus pipa pengaman - Bucket tinggi/batang bucket - Lampu peringatan putar - Penyangga pelat - Pengganti cepat - Lengan yang dapat diperpanjang - Lengan hidraulik yang dapat disesuaikan - Hidraulik tambahan - Perlindungan kelebihan beban

Kondisi: baru, Table length: 2000 mm Table width: 1000 mm Gjdpfx Agevn Uycjdebw Table height: 920 – 1000 mm (adjustable) Machine weight: approx. 0.45 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick S355 steel Surface is pickled and oiled. Tolerance: Top +/- 1 mm and sides +/- 1 degree. Side panels: 150 x 10 mm Height adjustable from approx. 920 to 1000 mm Underside reinforced with ribs. Incl. floor bearing Accessories optional!! Accessories shown in photos are optional!!