Rollforming unit 18 stasiun

MAT 600 x 3 mm

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling. Bsdpfx Aaofxyhfo Tsld

Kondisi: baik (bekas), Tahun pembuatan: 2000, Wir präsentieren Ihnen die SANJO PO3 Offset-Etikettendruckmaschine Maximales Format: 254 mm x 330 mm / Baujahr: 2000 Blsdpsu I Nu Sefx Aa Tjd Maschinendetails:  Baujahr: 2000  Druckverfahren: 6 x Offset (Toray)  Flexo-Lackierwerk  Abwickeleinheit  Corona-Entladeeinheit  2 x Heißfolienprägestation  1 x Luftkühlgerät  UV-Einheiten luftgekühlt  Flachbett-Stanzstation  SANJO Aufwickler mit Spot-Lackierer  Multipass-Einheit  High-Speed-Modifikation ist enthalten Technischer und optischer Zustand: Technisch: 9/10 (überprüft und in ausgezeichnetem, betriebsbereitem Zustand) Optisch: 9/10 (gereinigt, kann direkt an den Endanwender geliefert werden)

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending of sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Bledpfxodzqbls Aa Tsd Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Bljdpfx Aasb Tdquo Tod Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, Lini panel sandwich, atap 30,50,80,100 mm, dinding 50,80 mm, fasad 50,100 mm Bjdpsxcinasfx Aa Tjld

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration, equipped with Müdata, Mütrans, without warp beam rack, exceptionally clean, sourced from Germany, second-hand. Bedpfer I Am Hox Aa Teld NF42 in 4/42mm from 1988-1990: AN. No.: 88.04.017 H ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 88.04.169 D ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros

Kondisi: sangat baik (bekas), Offered is a used solid matter pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Bledpfjhwnfcex Aa Tjd

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Bljdpfxjhigmbo Aa Ted Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Basic specifications: - Year of manufacture: 2005 - Dimensions (LxWxH): 7580x4360x5120 mm - Weight: 6000 kg - Operating voltage: 400/415V 50Hz Blsdpfx Aajrfn Rve Ted - Power consumption: 20 kW - Output at 20g/l: 1,600 kg/h - Touch screen control panel - Feed hopper with screw conveyor - Complete set of documentation, available in both paper and electronic formats (electrical diagrams, CE certificate of conformity, operator's manual) - Condition: very good (machine is clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transport, as well as installation and commissioning of the machine by our technicians at a location specified by the customer.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Bjdohrnbkjpfx Aa Told Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.