Pusat pemesinan universal

Matec 30HV

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 36.111 h, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: LE 430 CA, berat keseluruhan: 16.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 15.000 W, jumlah sumbu: 4, This 4-axis CNC Matec 30 HV was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are seeking high-quality machining capabilities, you should consider the Matec 30 HV CNC vertical machining center, which we are offering for sale. Please contact us for further details. • Axis Travels and Speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing steps • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work Area and Clamping • Max. workpiece length for double-ended machining: X = 3500 mm - 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm (clamping plate length); 7 T-slots at 125 mm intervals Rsdpfxjyzq A So Alast • Electrical connection: total connected load 42 kVA

Kondisi: bekas, Tahun pembuatan: 2005, #de-001 Redpeyb S Ihjfx Alaot

Kondisi: bekas, Tahun pembuatan: 2004, de-hu-it-lt-001 Rodpfx Aljxx A Ncoast

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1786, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 825 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik One, beban meja: 1.500 kg, diameter meja putar: 800 mm, kecepatan rotasi (min.): 25 rpm, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 1, panjang alat: 460 mm, diameter alat: 200 mm, berat alat: 10.000 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, max. swivel angle +/- 105 degrees Absolute measuring system +/-3, selectable as either continuous or indexable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Absolute measuring system for X, Y, Z axes - Chip conveyor - Rinsing pistol - Centralized oil lubrication - Workspace lighting - Control: Siemens Sinumerik ONE Modern CNC system for highly productive machine tools, comprising: NCU 1740 22" ITC2200 V3 display Machine control panel MCP 2200 - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system: 900 l Filter capacity: 160 l/min - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M function in the part program to the external nozzles on the spindle head. #20 bar# - Through-tool compressed air (IK compressed air) Rsdpsxg Dhcefx Alaot - Partition wall for double-station system - 3D measuring probe with wireless connection - RTS table probe for measuring, verification - UT-Tec collision monitoring - Automatic safety doors

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8038938456C, panjang pembubutan: 450 mm, diameter putar di atas sled silang: 505 mm, diameter pembubutan: 202 mm, daya motor spindle: 10.000 W, kecepatan spindel (maks.): 6.000 rpm, lubang spindel: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ Rodpfx Alewk E Uzsajt Mesin ini berfungsi penuh, namun memiliki beberapa masalah kecil.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct position measuring system +/-3, optionally continuous or indexable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Telephone diagnostics / remote maintenance - Tool magazine with 48 positions - Auxiliary tool magazine with 216 positions Stationary tool magazine for loading the internal tool changer of the machine tool. Includes - Linear and rotary axes with drives - Controllers and sensors - Gripper for SK40 tool holders - Sheet steel housing - 6 tool levels for storing 216 tools with SK40 holders D=80 mm or D=160 mm with free adjacent position, including 40 pieces with L=430 mm 64 pieces with L=260 mm 112 pieces with L=160 mm Maximum tool weight 10 kg - Tool loading and unloading via a tool access door - Transfer to the machine via double gripper - Tool data input at the machine control panel, selection of tool positions via the auxiliary magazine control panel - Option: Control panel for tool data input at the auxiliary magazine - Additional charge for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air at external nozzles - IK compressed air through the tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing device with direct drive Indexing accuracy deviation max. +/-10 seconds Radial/axial run-out deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated into the machine table, without draw studs and cover - Tool breakage monitoring - Fully enclosed working area with roof - Bellows with steel lamellas - Direct position measuring system X, Y, Z axes - Chip conveyor - Rinsing nozzle - Centralized oil lubrication Rodpfx Aloxg D Atoaet - Work area lighting - Mounting elements

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 50.106 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, kecepatan spindel (maks.): 9.000 rpm, daya motor spindle: 16.000 W, jumlah sumbu: 5, This 5-axis vertical machining center, Matec 30 HV, was manufactured in 2012. It features a generous X-axis travel of 3000 mm, a Y-axis travel of 800 mm, and a Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle capable of speeds up to 9000 rpm and a maximum table load of approximately 2500 kg. If you are looking for high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Z travel: 800 mm (horizontal) • Z travel: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine condition: fully functional • Operating hours: 50,106 h Rodpfxjyrqvlo Alast • Control: Rexroth IndraMotion MTX Additional Equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through the spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D probing system (Renishaw) • Work area lighting Please note: The vise and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper size: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 II 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukuran TS 460. Mesin ini memiliki ukuran meja 1600 mm x 750 mm dan kecepatan spindle maksimum 12.000 rpm. Dengan dimensi 5000 × 4050 × 3235 mm dan berat 13.500 kg, ini adalah kesempatan yang sangat baik untuk membeli pusat pemesinan vertikal DOOSAN MYNX 7500 II ini. Hubungi kami untuk informasi lebih lanjut. • Panjang meja: 1600 mm Rjdpfsx U Dtwox Alajt • Lebar meja: 750 mm • Taper spindle: ISO 40 Double Contact • Kecepatan spindle maksimum: 12.000 rpm Dimensi Kedalaman mesin: 4050 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, sudut putar sumbu B (maks.): 105 °, sudut putar poros C (maks.): 360 °, This 5-axis milling-turning center, Matec 30 HV, was manufactured in 2010. It features a travelling column with an X-axis travel of 3,000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 800 mm. The B-axis swivels ±105°, and the C-axis can rotate 360°, allowing for the machining of complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control system, and a rotary table speed of 500 rpm, it enables precise turning and milling operations. For further information about this milling-turning center, please contact us. Additional equipment • Turning package: Enables high-precision turning operations in combination with standard milling, allowing for turning and milling in a single setup. Machine advantages Qualitative advantages Rsdpfx Asx D Dy Hjlaet • 5-axis CNC machining center with travelling column, rotary table, and swivel head Technical advantages • Full 5-axis capability for complex workpiece geometries • The rotary table is equipped with a manual 3-jaw chuck ROTA S Plus 800 by Schunk. • There is no hardware runtime counter on the controller. Additional information Machine still powered up

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 600 mm, jumlah sumbu: 5, Pusat pemesinan 3-sumbu Matec 30 HV ini diproduksi pada tahun 2013. Mesin ini memiliki panjang lintasan sumbu X yang mengesankan sebesar 2000 mm, lintasan sumbu Y 600 mm, dan lintasan sumbu Z 800 mm. Mesin ini menawarkan kapasitas penjepitan maksimum hingga 1200 kg dan kecepatan spindle maksimum 8.000 rpm. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Matec 30 HV yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Sumbu Z H: 800 mm • Sumbu Z V: 700 mm • Diameter lingkar interferensi: 950 mm • Berat jepit maksimum: 1200 kg • Posisi alat: 48 Redpfxeymm Exj Alaot

Kondisi: seperti baru (mesin pameran), Hydraulically height-adjustable welding turntable, 3000 kg capacity - Speed range: 0.05 to 0.6 rpm - Table diameter: 1200 mm - Tilt angle: 0 to 120° Rsdpfx Aedvn E Ujlajt - Total height adjustment: approx. 700 mm - Height adjustment (with vertical plate to center): 960 mm to approx. 1910 mm - Dimensions with horizontal plate: 1200 mm to 1900 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 14.136 h, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, beban meja: 400 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 16.000 W, jumlah sumbu: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007 and is distinguished by its robust vertical machining center design. It is equipped with a Rexroth control system, a standard spindle with a speed range of 20–15,000 rpm, and a maximum torque of 100 Nm. The machine includes a tool changer with a capacity for 36 tools and a machine table capable of supporting up to 400 kg. If you are looking for a high-quality milling machine, you should consider the Matec MATEC 30 HV/K we are offering for sale. Please contact us for further information. Machine Advantages Qualitative Machine Advantages • The machine is from 2007 but was retrofitted in 2016. Technical Machine Advantages • Hard drive: 26 GB • Integrated network card • Max. torque: 100 Nm (40% duty cycle) • Temperature-controlled liquid cooling • Work area: fully enclosed with roof, bellows (steel lamella) • Installation: Height-adjustable leveling feet • The Matec HV 30 was overhauled in 2016 by the manufacturer Matec Maschinenbau Additional Information Cooling & Accessories Rjdpex D Ix Tofx Alaot Coolant: High-pressure coolant supply (20 bar, optionally 40 bar) Paper band filter (30 μm fineness) Tank capacity: 450 l Chip conveyor: Integrated scraper conveyor Oil mist extraction: Electrostatic filter (1,000 m³/h) Measuring & Safety Technology Direct measuring system: Linear encoders on all axes 3D measuring probe: Wireless transmission to the control system Tool monitoring: Laser-assisted tool breakage monitoring Tool length measurement (software) Optional Spindle (HSK 63-A): Higher performance: 30 kW / 190 Nm Drilling capacity (steel): up to 60 mm Milling performance: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 21.990 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0903, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, model controller: Heidenhain iTNC530, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Perjalanan sumbu 3000 x 800 x 1100 mm (X-Y-Z) Kontrol Heidenhain iTNC530 Handwheel 48 alat dalam rantai Motor spindle 12.000 rpm / 30 kW / 198 Nm Konektor alat HSK63 Sistem pengukuran langsung di semua sumbu IKZ 20 Bar dengan unit filter sabuk, kapasitas 450 liter Meja putar NC terpasang untuk H/V, Ø 500 mm 3D probe pengukur Renishaw Rsdpfjyqx N Dox Alaet Probe pengukur alat Renishaw Motor spindle baru, ball screw sumbu X baru, geometri disetel, sepenuhnya diservis.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 575 mm, daya motor spindle: 26.000 W, tinggi total: 1.840 mm, berat keseluruhan: 5.100 kg, produsen pengendali: MAZATROL, jumlah sumbu: 3, en Rsdpfxox D Rmte Alajt

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 20.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.300 mm, Perlengkapan: konveyor serpihan, Kondisi baik, fungsi millturn dengan kepala spindle. Rjdeyl S Ntopfx Alajt