Pusat permesinan CNC

Matsuura H.Plus-405

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 660 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.000 W, jumlah sumbu: 4, Mesin 4-sumbu tipe Matsuura H. Plus 405 ini diproduksi pada tahun 2006. Mesin ini memiliki rentang pergerakan 600 mm pada sumbu X, 660 mm pada sumbu Y, dan 660 mm pada sumbu Z, serta sumbu B yang dapat berputar 360°. Mesin ini memiliki ukuran benda kerja maksimum 700 × 850 mm dan kapasitas pengubah perkakas sebanyak 60 perkakas. Jika Anda mencari opsi pemesinan berkualitas tinggi, Anda sebaiknya mempertimbangkan pusat pemesinan horizontal Matsuura H. Plus 405 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Sumbu B: Meja putar 360° • Kecepatan cepat X/Y/Z: Hingga 60 m/menit • Ukuran palet: 500 × 500 mm • Ukuran benda kerja maksimum: 700 × 850 mm • Berat benda kerja maksimum: 400 kg • Pengubah palet: 2 posisi • Kecepatan putar spindel utama: maks. 12.000 RPM • Opsi dudukan perkakas: SK40 / BT40 / HSK63 • Daya penggerak spindel maks.: 15 / 22 kW • Torsi spindel maksimum: 187 Nm • Kapasitas pengubah perkakas: 60 perkakas • Waktu penggantian perkakas: sekitar 3,5 detik Spesifikasi Teknis Tsdpszwp S Uofx Aaijb Ukuran Tirus: SK 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Meja pengindeks 400 mm manual Set perkakas termasuk Lubang meja: 10 - 130 mm Lebar alur pasak: 2 - 32 mm Tsdpexclfzjfx Aaisb Kecepatan umpan: 0,5 - 5 m/menit; Diameter meja Ø: 690 x 460 mm Kapasitas beban meja: 2000 kg Jarak gerak ram: 0 - 425 mm Panjang: 1300 mm Lebar: 1100 mm Tinggi: 1400 mm Berat: 1800 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Pusat Pemesinan Produsen: Matsuura Tipe: H Plus 405 PC6 Tahun Pembuatan: 2003 Kontrol CNC: Fanuc G-Tech 16i Tsdpsltlx Njfx Aaiob Jarak pergerakan: X/Y/Z: 600 x 600 x 600 mm Ukuran meja: 500 x 500 mm Pengubah palet 6 posisi Majalah perkakas: 120 posisi Sumbu ke-4 Sistem bertekanan tinggi Knoll Pendingin internal 70 bar 3826

Kondisi: bekas, Tahun pembuatan: 2004, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, berat benda kerja (maks.): 400 kg, tinggi total: 2.640 mm, panjang total: 5.870 mm, lebar total: 3.440 mm, berat keseluruhan: 11.300 kg, panjang meja: 500 mm, lebar meja: 500 mm, kecepatan rotasi (min.): 15.000 rpm, Perlengkapan: dokumentasi / manual, Matsuura Horizontal Machining Center CNC Control: Matsuura G-tech 16i Pallet Table Size: 500x500 mm Number of Pallets: 6 Table Load Capacity: 400 kg Spindle Speed: 15,000 rpm Magazine Capacity: 240 Tsdpfxsy N Awdj Aaisb For any questions regarding the machine or to arrange an inspection appointment, please feel free to contact us by phone or email.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: BT40 - Spindle motor power: 15 kW - Spindle speed: 8100 rpm - Gearbox - Number of spindle speed ranges: 2 - Spindle hours: 4000 h LINEAR AXES - Travel X/Y/Z axes: 1270/508/635 mm - Rapid traverse speed (X/Y/Z): 35.6/35.6/35.6 m/min - Feed rate (X/Y/Z): 21 m/min - Distance from table to spindle nose: 742 mm TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 40 TABLE - Table size: 1321/495 mm - Max. table load: 794 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 30 kW WEIGHT AND DIMENSIONS - Required floor space: 3870/2510 mm - Machine height: 2690 mm - Machine weight: 6260 kg MACHINE HOURS - Powered-on hours: 16247 h - Operating hours: 6025 h EQUIPMENT - Control: HAAS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - Electronic handwheel - Synchronized tapping - Prepared for 4th/5th axis rotary table - Coolant tank: 208 l - Chip conveyor - Tool setting probe Todpfoyn R Igjx Aaieb - Electrical transformer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, model controller: Fanuc G-Tech 16i, panjang meja: 500 mm, DETAIL TEKNIS Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 600 mm Perjalanan sumbu Z: 600 mm Ukuran meja: 500 mm x 500 mm DETAIL MESIN Tsdpfx Ajy Atwusaieb Jam operasional: sekitar 73.000 jam Kontrol CNC: Fanuc G-Tech 16i Majalah alat: 120 posisi Pendinginan internal: 70 bar PERLENGKAPAN Penukar palet 6 posisi Sumbu ke-4 Unit tekanan tinggi Knoll Catatan: Mesin sudah dibongkar.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Fanuc, model controller: 30i, hidung spindel: BT40, jumlah slot dalam magazin alat: 51, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, MATSURA HPLUS 405 MODEL 2007 UKURAN PALET 500 x 500 mm SISTEM KONTROL FANUC 30i SPINDEL BT40 12.000 rpm SISTEM PENDINGIN TIPE KNOLL SEKITAR 50 SET HOLDER TOOL DIKUTSERTAKAN MAGAZINE ATC KAPASITAS 51 ALAT PERJALANAN SUMBU X-Y-Z: 600-600-600 mm DALAM STOK KAMI TERSEDIA: *Pusat Pemesinan Horizontal *Mesin bubut CNC 2 sumbu *Mesin bubut CNC 2 sumbu + sumbu C *Mesin bubut CNC 2 sumbu + sumbu C + sumbu Y *Pusat Tapping CNC *Pusat Pemesinan Vertikal CNC 100% milik sendiri, lebih dari 50 mesin CNC tersedia di stok! Silakan hubungi kami untuk pertanyaan lebih lanjut. Tsdpfxjyrdywe Aaiob CNC World Machine LTD

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06007153/001, tinggi total: 6.050 mm, lebar total: 3.380 mm, panjang total: 3.074 mm, kapasitas muatan per bagian penyimpanan: 210 kg, tinggi konstruksi: 6.050 mm, tegangan masuk: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Manufacture: 2006 Total Load Capacity: 2 x 33,550 kg Load per Tray: Medium: 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available on request) Shuttle Dimensions (W x D x H): 3,380 x 3,074 x 6,050 mm (Kardex height is adjustable to available installation height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid while the system is unsold. Technical Specifications per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays Medium: 210 kg each, evenly distributed; additional or heavier trays available upon request. - Tray size: 3050 x 864 mm - Machine dimensions (W x D x H): 3,380 x 3,074 x 6,050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m²; each tray approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for the protection of personnel and stored goods - Control unit: C2000, with B/W OP2000 display - LED anti-glare lighting above access opening - Toothed belt drive for minimal noise - Toothed belt drive for fastest order picking - Shelf support profile configuration allows 25 mm adjustment steps—a prerequisite for high-density storage - Weight monitoring controls for each tray - Includes light pointer/position indicator Tsdsxq Tbtjpfx Aaieb Price: On request, only via email Price: excl. VAT, incl. transport and installation Delivery: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands including Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus series. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Tjdpfx Aaer A Hcboieb Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Tjdpoyn Em Refx Aaieb Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.