Matsuura MAM 72-63 V

Matsuura MAM 72-63 V

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Dsdpfx Ahsxdc Uvjuokk

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm Dkjdpehzbipsfx Ahujk - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II Dkodpfx Aow Ephbshuek - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vice - Tool holders

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ukuran meja 1600 x 750 mm, kapasitas muat meja 1.500 kg, pergerakan XYZ 1525 x 762 x 625 mm, kecepatan gerak cepat 24 m/menit, daya spindle 18,5 kW, kecepatan spindle 6.000 rpm, ATC 40 stasiun, taper spindle BT50, pendinginan melalui spindle, konveyor serpihan, kontrol Fanuc 21i. Dksdpfx Aexwytcjhuek

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 15.000 h, Penggerak Utama Rentang kecepatan spindle: 12000 rpm Taper alat: Capto C6 Jumlah sumbu: 5 Pergerakan Pergerakan sumbu-Y: 230 mm Djdpfex E Eamex Ahuskk Pergerakan sumbu-A: 1550 mm Benda Kerja Diameter benda kerja di atas alas: 1000 mm Pusat bubut-milling 5-sumbu DOOSAN Puma MX2600ST ini diproduksi pada tahun 2013. Memiliki diameter turning maksimum Ø 760 mm, panjang benda kerja hingga 1540 mm, serta kapasitas batang Ø 76 mm. Dilengkapi kendali Fanuc 31i-A, dua spindle dengan kecepatan hingga 4000 rpm, dan spindle milling hingga 12.000 rpm. Termasuk majalah alat dengan 80 posisi dan konveyor serbuk. Jangan lewatkan kesempatan untuk membeli pusat bubut-milling DOOSAN Puma MX2600ST ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Pembubutan

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die von Hand gezeigten Teile sind nicht enthalten. Technische Details siehe Abbildung. Dkodpsrpn Dvefx Ahujk

Kondisi: hampir baru (bekas), Los compresores GA (W) VSDs (Accionamiento de Velocidad Variable) son compresores de tornillo de una sola etapa, inyectados con aceite, accionados por motor eléctrico, estacionarios y de una sola etapa. Dkodpfx Ahewxwxzsuek El sistema de refrigeración está equipado con un enfriador de aire y un enfriador de aceite. Los modelos GA VSD son compresores refrigerados por aire; el aire de refrigeración es generado por un ventilador. Características principales: - Temperatura máxima de entrada de aire: 40ºC. - Temperatura máxima de salida del agua de refrigeración: 50ºC - Temperatura del aire a la salida de la válvula: aprox. 30ºC - Capacidad aproximada de aceite: 17,9 L

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Cutting length: 1060 mm Cutting angle: 2° Strokes per minute: 50 strokes/min Motor power: 4.0 kW Machine weight approx. 0.67 t Motorized Guillotine Shear Type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Approx. stroke rate: 50/min Cutting angle: 2° Dkodoua Iuljpfx Ahujk Hold-down opening width: 5 mm Factory setting for blade clearance: 0.1 mm - Digital display for back gauge - Front table support - Operating manual available

Kondisi: bekas, Tahun pembuatan: 2015, X-axis travel 560 mm Y-axis travel 560 mm Z-axis travel 660 mm Control M 730 BM MAPPS IV Distance spindle center to table 80 - 640 mm Distance spindle nose to table center 70 - 730 mm Max. spindle speed 12,000 rpm Main spindle drive power 15 / 11 kW Tool holder SK 40 Spindle diameter at front bearing 80 mm Number of pallets 2 positions Working height 1,050 mm Pallet size 400 x 400 mm Max. workpiece weight 400 kg Max. workpiece diameter 630 mm Max. workpiece dimension - height 900 mm B-axis 0.001° Indexing time 90° 1.3 sec Pallet change time 8.0 sec Number of tool stations 60 positions Tool holder SK 40 Max. tool diameter 70 mm Max. tool diameter if adjacent station free 170 mm Max. tool length 450 mm Max. tool weight 8 kg Tool-to-tool change time 0.9 sec Dodpex Hpytjfx Ahuokk Chip-to-chip change time 2.8 - max. 9.9 sec Feed rate max. 60,000 mm/min Rapid traverse (X / Y / Z) 60 m/min Total power requirement 35 kVA Machine weight approx. 7.9 t Space requirement approx. 5.5 x 3.5 x 2.6 m CNC Horizontal Machining Center MORI SEIKI - NHX 4000 - Pallet changer - WITHOUT clamping towers

Kondisi: baik (bekas), daya: 0,018 kW (0,02 hp), jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, berat keseluruhan: 15.000 kg, panjang meja: 2.600 mm, lebar meja: 850 mm, kecepatan spindel (maks.): 8.000 rpm, Perlengkapan: konveyor serpihan, FEATURES Table: 2600 x 850 mm X-axis travel: 2200 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 8,000 RPM Control: Fagor 8055 - MC Motor power: 15/18.5 kW Tool magazine capacity: 40 Dkedor I Aumspfx Ahusk Tool taper: BT 40 4th axis (IRTS rotary table): 350 mm diameter Electronic handwheel Coolant through spindle Chip conveyor Air cooling Dimensions with chip conveyor (W x L x H): 4029 x 7050 x 3100 mm Weight: 15,000 kg