Pusat permesinan vertikal

Matsuura MAM72-25V PC 2

Used 5-axis vertical machining center, year of manufacture 2007 / SN17224 / Control ON-Time: 66,963 hours

Control System
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travel

X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: ∅250 x height 250 mm
Max. pallet load: 40 kg
Pallet interface: Capto C6

Spindle
Speed range (standard): 50 – 15,000 rpm
Spindle taper with face contact: BT 40 JIS B 6339 Big+
Spindle motor output with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Travel and Positioning Speeds
Rapid traverse:
X-, Y-, and Z-axis rapid: 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Feed rates:
X-, Y-, and Z-axis: 1 - 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter (all stations occupied): Ø96 mm
Max. tool diameter (adjacent stations empty): Ø150 mm
Max. tool length: 300 mm

Guides
Axis guides: Roller guides
Lubrication: Permanent grease lubrication
Ball screws
Ball screw diameter (X-, Y-, Z-axis): Ø36 mm
Pitch: 16 mm

Axis Drives
X-, Y-, Z-axis power: 4.5/4.5/5.5 kW
B- and C-axis power: 4.5/2.5 kW
Axial force X-, Y-, Z-axis: KN

Space Requirements* (Standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
*Dimensions may vary for this specific machine!

Machine Weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Electrical Data
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Line voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 - 9.5 bar
5-axis simultaneous control

Chedpfx Adewwk Dzepsc
Upgrades
Tool magazine capacity extended from standard 30 to 40 tools

Pallet changer with 2 pallets, 130 mm diameter

Direct measuring system (Heidenhain) on X-, Y-, Z-axes, supplied with sealing air

Coolant Systems

KNOLL coolant system, comprising*:

- 1 scraper-belt or hinged-belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year 2010)

- 1 through-spindle coolant supply with coolant pump KTS25-50T, capacity 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-stage switchable

- 1 external cooling with coolant pump, 100 l/min at 1.4 bar

- 1 coolant shower with coolant pump, 100 l/min at 1.4 bar

- 1 compact filter KF200, filtering capacity 200 l/min

- 2 spiral chip conveyors in the machine (standard option)

In-Machine Measuring

- RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, exchangeable into spindle via tool changer

- OMRON pressure sensor for tool length measurement and tool breakage monitoring

Specifications and details subject to change and error. Prior sale reserved!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.