Sistem pendingin

MAYFRAN DPF400-V980 SKD -10

Tahun pembuatan: 2021, Kondisi: baru, Type: gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace capacity: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7 Kedpfx Aeg E S Ineahsfa

Kondisi: baik (bekas), Tahun pembuatan: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control system: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Process: Single-lip drill Drilling depth: Plunging spindle: 110 mm Sealing housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t We do not assume any liability for the correctness, completeness, or currentness of the information provided. Kedpsvcbg Sefx Aahefa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Kfedpfxjvgxfys Aahja Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de Ksdpfjwl Uvkjx Aahsfa

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer Kfedpfxeul Efmj Aahsa - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Kedpfx Aogyd T Esahjfa Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, daya nominal (semu): 30 kVA, torsi: 163 Nm, beban meja: 400 kg, diameter meja putar: 400 mm, kecepatan rotasi (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 48, panjang alat: 300 mm, diameter alat: 70 mm, berat alat: 10 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Technical features: - CNC OSP P 200 - Chip conveyor - 48 tools - Full-continuous rotary table with 360,000 positions - 15,000 RPM, BT 40 spindle Kfedpfx Asuw Sq Ujahsa - Through-spindle coolant system, 20 Bar - On-table tool presetting - Work area shower-type washing system Note: The machine has always operated with full oil, machining Teflon material.

Kondisi: seperti baru (mesin pameran), ATEX-CERTIFIED PUMP Oil-sealed rotary vane vacuum pump. Available in stock. Fully overhauled pump. Comes with warranty. Nominal flow rate: 30 m³/h at 50Hz. Kjdpjftzgxjfx Aahsfa Ultimate vacuum: 1x10^-3 mbar abs. For any questions, please contact us.

Kondisi: bekas, Tahun pembuatan: 2005, Grinding diameter: 500 mm Grinding length: 1500 mm Center height: 250 mm Control system: GRINDplusIT Machine will be partially overhauled, including measurement protocol and warranty. Delivery within Germany and neighboring countries. 1 x UR-RS 175 / 1500 standard version (T1, T2, T5, T7) 1 x Grinding wheel equipment T1 400x63x127 mm Kodpfx Aajwulrhohofa 1 x Grinding wheel equipment T2 400x63x127 mm 1 x Grinding wheel equipment T5 400x63x127 mm 1 x Internal grinding device T7 Ø120 mm for HF spindles 1 x Center height 250 mm 2 x Grinding head motor: drive power 10.0 kW 1 x CNC control Heidenhain GRINDplusIT 1 x Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 x KEL-POLY, non-circular grinding 1 x KEL-NET for CNC control GRINDplusIT 1 x B-AXIS GRINDplusIT: "CNC-controlled B-axis" (standard) 1 x GRINDplusIT: v constant 35 m/s or 45 m/s, spindle speed adjustment via control 1 x T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 x Operating unit for 1x MFM or MFV spindles, VACON 22 kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 x Tailstock with manual retraction 1 x MICRO ADJUSTMENT: tailstock base with micro adjustment 1 x Spring-loaded quill insert 1 x Pneumatic unloading for tailstock 1 x Upper table flooding (standard) 1 x Workpiece spindle head reinforced MK 5 DIN 55026 Size 5" 1 x C-AXIS: CNC-controlled C-axis for reinforced workpiece spindle head 1 x FIXED base for reinforced workpiece spindle head 1 x KELPOS: active longitudinal positioning MOVOMATIC, mounted on the grinding head 1 x Diameter gauge Movomatic DU200 1 x Measuring control unit Movomatic ES124 / digital 1 x KELSET: tool measurement system KELSET, MARPOSS 1 x Base module for KEL-TOUCH approach sensor and KEL-BALANCE balancing device 1 x KEL-TOUCH, approach sensor for diagonal/tandem 1 x Full enclosure, emulsion 1 x Coolant cleaning pistol connected to the table 1 x Grinding mist extraction unit, emulsion 1 x Lubricant for initial filling HF dressing unit type IBAG mounted on upper table Data based on delivery condition, without guarantee.

Kondisi: bekas, Tahun pembuatan: 2013, Wheel diameter – max. 260 mm Wheel width 320 mm Module – max. 4.5 Module – min. 0.5 Control system SIN 840D Helix angle – max. +/- 45° Total power requirement 68 kW Machine weight approx. 15,500 kg Space requirement approx. 3.25 x 3.25 x 3.30 m Fire extinguishing system Siemens Sinorix TM Kfjdpfx Asvxwtmeahoa Knoll filtration unit VL1500/8000, year 2017 Oil mist separator 3NINE NINA 1200 Wekal loading cell Grinding wheels