MESIN BUBUT - CNC

MAZAK INTEGREX 200 IV ST

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT CNC 8-SUMBU DENGAN KEPALA MILLING, KEPALA TURRET BAWAH, DAN COUNTER SPINDLE DIAMETER PUTAR MAKSIMAL: 660 mm PANJANG PEMBUBUTAN MAKSIMAL: 1495 mm DIAMETER PEMBUBUTAN MAKSIMAL: 660 mm KAPASITAS BATANG: 65 - 65 mm SPINDLE: 35–5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35–5000 rpm; 18,5 kW; 254 mm KEPALA: CAPTO C6; -30°+195°; 15–12.000 rpm; 18,5 kW JARAK GERAK SUMBU X: 580 mm JARAK GERAK SUMBU X2: 150 mm JARAK GERAK SUMBU Y: 160 mm JARAK GERAK SUMBU Z: 1545 mm JARAK GERAK SUMBU Z2: 1490 mm JARAK GERAK SUMBU B: 1550 mm PERGERAKAN CEPAT X-Y-Z: 38 - 26 - 38 m/menit KEPALA TURRET BAWAH: 9 POSISI MAJELAS ALAT: TIPE RANTAI; 80 POSISI Fgodpfx Aijw Ey R Hjrsc COOLANT TEKANAN TINGGI: 18 Bar UNIT KONTROL: MAZATROL MATRIX BERAT: 11.800 kg DIMENSI TOTAL: 5.090 x 3.270 x 2.830 mm AKSESORIS: KONVEYOR SERPIHAN; FILTER KERTAS; SETTER ALAT

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, CNC lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and subspindle Control: Mazatrol PC Fusion CNC 640T Technical data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Tool turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time - 1st position: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min Fgedpjx Hgl Hofx Airsc C-axis: 1 – 2,000° / min

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, MAZAK INTEGREX i-100H Diameter pemesinan maks.: 600 mm Panjang pemesinan maks.: 590 mm Kecepatan milling maks.: 12.000 rpm Kecepatan spindle maks.: 6.000 rpm Mesin dilengkapi dengan: Fodpfey Hwn Eex Airjgc - Kontrol CNC Mazatrol SmoothAi - Majalah alat untuk 74 alat - Chuck tiga rahang KITAGAWA B-206, diameter 169 mm - Tool Eye - Akurasi input sumbu C 0,0001° - Sumbu Y - Sumbu B 0,0001° - Paket pemrosesan 5-sumbu untuk SmoothAi - Pompa pendingin yang diperkuat 15 bar - Konveyor serbuk, pembuangan samping

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 640, tinggi total: 2.700 mm, berat keseluruhan: 9.600 kg, kecepatan spindel (maks.): 20.000 rpm, panjang produk (maks.): 3.000 mm, jumlah sumbu: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It is equipped with a Heidenhain iTNC 640 control unit, a spindle speed of 20,000 rpm, and a 120-position tool changer. The machine features a chip conveyor, a coolant system, and an internal coolant supply with 40 bar pressure. It is ideally suited for high-precision machining applications. Take the opportunity to purchase this DMG MORI DMU 60 EVO vertical machining center. Contact us for more information about this machine. • NC rotary tilting table Fsdpfxjy D Hvaj Airogc • Tool changer: Yes, chain magazine with 120 positions • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; rinse gun; air blast through spindle center • Swiveling viewing window • Electronic handwheel • Display languages: German/English • Footprint: 25 sqm • Condition: Very good, in operation Additional Equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage monitoring TRS2 • 4-color signal light • Extended M65 interface for Erowa Job Management System • Preparation for EROWA handling system (Operation Mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Kondisi: bekas, Tahun pembuatan: 2011, trans-001 Fgjdpfeyz Dcfox Airoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Tischlänge 175 mm Fodsxvdr Tjpfx Airsgc

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Fgodpfxjdpak Ro Airjc Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 67 h, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.300 rpm, jarak pergerakan sumbu X: 615 mm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 1.585 mm, berat keseluruhan: 16.600 kg, produsen pengendali: MAZATROL, jumlah sumbu: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine offers a robust tool magazine with 72 positions and is equipped with both a main and a secondary spindle to extend machining capabilities. If you are looking for high-quality turning and milling operations, consider the Mazak INTEGREX i-200 S turn-mill center. Contact us for further details. • Operating hours: Approx. 68 hours • Availability: Immediately • Key Features: • Full simultaneous 5-axis machining • Main spindle + secondary spindle • Milling spindle with automatic tool changer • Complete turning and milling in a single setup • Capacity and Working Area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (secondary spindle): Ø65 mm • Maximum supported mass (main spindle): 650 kg • Maximum supported mass (secondary spindle): 300 kg • Main Spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blast system: Included • Additional equipment: Heavy-duty spindle HD1; replacement of standard spindle cylinder and chuck • Secondary Spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling Spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: Oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool Capacities: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis Travels Fodpfx Aisy Sltgoregc • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool System and Magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Features: Tool breakage detection in magazine; overload protection • CNC Functions and Software • 5-axis machining functional package • Cutter radius compensation for 5-axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous threading with milling spindle • Cooling and Preparation • Through-tool coolant: 7 MPa • Prepared for oil mist extraction unit • Highlights • Practically as-new with only ~68 operating hours • Extensive factory configuration • Full simultaneous 5-axis machining • Main and sub-spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings over new purchase Additional Equipment • Chip and Parts Handling • Side chip conveyor – Consep type • Parts belt conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder magazine • Interface kit for bar feeder • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Miscellaneous Accessories • Mounting dowels for the machine • 3-color machine status signal lamp Technical Specification

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 655 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Fanuc, model controller: Fanuc 0i-MD, panjang benda kerja (maks.): 400 mm, lebar benda kerja (maks.): 355 mm, berat benda kerja (maks.): 250 kg, tinggi total: 3.120 mm, panjang total: 2.995 mm, lebar total: 2.975 mm, diameter meja putar: 350 mm, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 15 batang, daya motor spindle: 15 W, hidung spindel: ISO 40, jumlah slot dalam magazin alat: 40, panjang alat: 270 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan vertikal BEKAS 5-sumbu dengan CNC FANUC 0i-MD Fgsdpfx Aiox N Tm Nersc

Kondisi: bekas, Tahun pembuatan: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control system: PC Fusion CNC 640 T Fsdpfx Aisxmagujrsgc Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance spindle nose to turret face: 115 - 690 mm Spindle speed range (main spindle): 35 - 4,000 rpm Main spindle drive power: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum usable bar diameter: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range (driven tools): 25 - 4,500 rpm Drive power (driven tools): 3.7 kW Maximum torque (driven tools): 35 Nm Speed range (sub spindle): 35 - 4,000 rpm Drive power (sub spindle): 7.5 kW Maximum torque (sub spindle): 57 Nm Maximum chuck diameter (sub spindle): 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 - 5,000 mm/min Feed range C: 1 - 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK - Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis