Mesin bubut tengah

MCM TC 260-105-1500 Premium

Kondisi: bekas, Tahun pembuatan: 1974, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross-slide: 300 mm Turning length: 2100 mm Distance between centers: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse X-axis: carriage 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g., metric, module, and inch threads Rapid traverse on cross-slide Chuck guard Ledou Ix Dcspfx Aa Ushg 2x chip trays Accessories: (see comparable on photo) 2x steady rests (1x closed, 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers Various gears

Kondisi: baru, Tahun pembuatan: 2026, Circular saw with table, right-side table extension, and straight and mitre fence. This machine incorporates many solutions usually found in more expensive units of this class. An excellent price-to-performance ratio has been achieved without any compromise on quality or versatility. Machine description The innovative circular saw combines strength, precision, versatility, and compact design. It is specifically created for small carpentry workshops, furniture manufacturers, and craftsmen. The machine features many technical solutions typically reserved for higher-priced equipment, delivering outstanding performance at a competitive price without compromising quality or multifunctionality. Ledpfx Aaevxhi Ej Uehg Included with the machine: carbide-tipped saw blade 250 x 30 x 2 mm Maximum blade/center bore diameter: 254 x 30 mm Blade speed: 4000 rpm Blade tilt range: 90 – 45° Maximum cutting depth at 45º: 65 mm Maximum cutting depth at 90º: 80 mm Cutting width with table extension: 750 mm Maximum cutting length: 1000 mm Dust extraction port: 100/25 mm Working table dimensions: 635 x 420 mm Working table dimensions with extension: 635 x 1500 mm Motor power: 2.2 kW (S1) 400V / 3.1 kW (S6) Weight: 110 kg Overall dimensions: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Lhjdpfx Aaju Rptyj Uog Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) Lhsdopiarnjpfx Aa Usg The crane is disassembled and available immediately. Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Tahun pembuatan: 2012, Kondisi: diremaj di bengkel (bekas), Mesin Bubut Presisi Konvensional WEILER "CONDOR VC" Dengan indikator digital Siemens 3 sumbu Tahun pembuatan: 2012 Lubang spindle: 56 mm Jarak pusat: 800 mm Lodpfx Asxykz Aoa Uohg Diameter ayun di atas ranjang: 205 mm Rentang putaran: 30 – 3500 rpm Dengan perlengkapan berikut: Pemegang perkakas Multifix Pelindung serpihan dengan pencahayaan dalam Sistem pendingin cairan Cekam 3 rahang Ø 200 mm Pelindung cekam Lunette pengikut Ø sekitar 150 mm Tailstock dengan pinol pengebor yang dapat ditarik Manual pengoperasian

Kondisi: baru, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60–4200 rpm - Solid construction made from high-quality Meehanite cast iron - High concentricity accuracy thanks to tapered roller bearings; measured runout in the quill less than 0.01 mm - Infinitely variable speed control - Forward/reverse for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y-axis with flat guideways - Drilling/milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step 0.04–0.15 mm/rev - Motorized feed in X, Y, and Z axes - Precision micro-feed - Milling spindle with precision bearing - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel Lhedpfx Aajd H Hhze Ujg - Central lubrication - Height-adjustable safety screen with microswitch for maximum operator protection against flying chips and parts - Large, heavy-duty cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity 300 kg - Large travel distances: X / Y / Z axis: 740 mm / 330 mm / 320 mm Dimensions and Weights Length: 2400 mm Width/Depth: 2160 mm Height: 2300 mm Weight: 1200 kg Drilling/Milling Capacity Max. face mill size: 76 mm Max. shank-type end mill: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Connection Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Milling Table (Horizontal) Length: 254 mm Width: 1370 mm Vertical spindle to milling table max.: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal Spindle Overhang: 0–420 mm Coolant System Coolant pump drive power: 90 W Motors Vertical spindle power (standard operation): 2.2 kW Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical Spindle Overhang: 0–420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60–4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Swivel range, milling head X–Y plane: 90° Swivel range, milling head Z–X plane: 45° Quill diameter: 86 mm Quill travel: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel (Z-axis): 470 mm PU: 1

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 520 mm, kecepatan rotasi (maks.): 12.000 rpm, CNC control Heidenhain TNC 430 32-station tool changer Coolant system 2x chip conveyors Touch probe The total X-axis travel distance is 2050 mm, which means you can mill up to 2 meters in one pass. A partition wall is included. When the partition is installed, the X-travel is divided accordingly. Technical data / technical details: X-axis travel: 2050 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Spindle taper: SK40 Spindle speed range: 12,000 rpm Number of tool slots in changer: 2x 32 Spindle drive power: 36 kW Weight approx.: 12,800 kg Lodpfx Asu Hf Ryja Uehg Technical data, accessories, and machine description are non-binding.

Kondisi: baru, Tahun pembuatan: 2025, Yanigav Bor Tanah TAM 245 • Penambatan tiga titik yang sederhana • Rangka sangat kokoh, dilas • Gearbox serbaguna dan bertenaga, dari 30 hingga 90 HP • Diameter mata bor tanah yang dapat digunakan: 10 cm hingga 80 cm dengan tinggi maksimal 1,80 m • Pergeseran 1,30 m di setiap sisi sumbu • Rangka dengan panjang 245 cm • Koreksi kemiringan auger (depan/belakang dan kanan/kiri) • Bor tidak termasuk Ledpfx Aasr Eznie Uohg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis vertical machining center HAAS VF-4SS was manufactured in 2008. It features a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer with 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, you should consider the HAAS VF-4SS we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feedrate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Lsdpsx D Irmsfx Aa Ushg Additional equipment • Auger-type chip conveyor • Additional high-pressure filtration system

Kondisi: bekas, de-hu Lhedpev Rgzwefx Aa Ueg