Diesel generator set 300 kVA

MECC ALTE / VM V 12 Notstromaggregat, (3519)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Dcedsy Hmfyopfx Aavop Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Tahun pembuatan: 1998, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12254 B521 860, bridge crane ± 10,500 mm x 12,500 kg Dsdpsv Ip Egefx Aavocp

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 95.239 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 173937, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, tinggi cetakan (min.): 250 mm, panjang total: 5.100 mm, lebar total: 1.800 mm, tinggi total: 2.200 mm, berat keseluruhan: 6.630 kg, Perlengkapan: dokumentasi / manual, The machine was running perfectly until the very last day before the new machine was delivered. Therefore, the machine is in good used condition. Due to a lack of space in the injection molding area, the machine is being sold and is no longer connected to power. Pump / injection unit / clamping unit are leak-free. Dodpfov D Nxlex Aavscp Machine manual is available. Videos of the machine are available. Operating hours pump: 95,239 Operating hours automatic: 86,082 Repairs carried out in recent years: - Filter replaced annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed incl. new piston

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Still very nice veneer saw with planer head. Cutting length: 3050 mm. Equipped with rear support and stop. Dcjdpfx Ajn An A Tjavep

Kondisi: baru, Tahun pembuatan: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tonnes Sheet thickness 42 kgf / mm: 8 mm Sheet thickness 72 kgf / mm: 4 mm Upper tool: 1260 Top Tool 85° Lower tool: 50, 35, 22, 16 Frame gap (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (optionally CNC motorised at extra cost) X-axis stroke: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 litres Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Frame depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), expandable with optional R+Z axes Eurostamp 2067 lower tool (V:50, 35, 22, 16) Eurostamp 1260 upper tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorised backgauge (X:750 mm) Adjustable backgauge fingers Selectable inch and metric system Ground and chromed cylinders Swivelling control panel Foot pedal with anti-panic stop & emergency stop Side safety fences (secured with limit switches) Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system, BOSCH/REXROTH or ECKERLE hydraulic pump Moveable front support arms (2 pcs) Electrical unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Finish: RAL 7035, RAL 5015 Optional special equipment (available at extra cost): Dodpfx Aasgu N Alovecp - CNC-controlled R-axis (250 mm) - CNC-motorised crowning - Servo drive motors for backgauge system for X+R axes (Mitsubishi) - Custom colour finish on request Documentation in German or English CE conformity

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Dcedpfxsuz If Ne Aavop Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 33.107 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin Terbaik dari Produksi Ruang Bersih (Farmasi) Mesin dapat diperiksa saat beroperasi setelah ada kesepakatan. Data Teknis Produsen: Engel Tipe: V 330H/80V/130 Combi 2 Warna dengan Meja Putar Nomor Seri: 162036 Tahun Pembuatan: 2006 Jam Operasi: 33.107 jam Sistem Kontrol: CC 200 Fitur Tambahan - dengan meja putar berdiameter 820 mm - dengan Robot GEKU SR 500 ST x=600 y=1400 z=2500 mm - hanya 33.107 jam operasi - Pelindung/kandang pengaman - Konveyor horizontal - Hampir tidak ada kerusakan cat / kondisi seperti baru - Sepenuhnya berfungsi Dimensi P/L/T: lihat gambar Berat: 10.600 kg Kondisi Operasional: Sepenuhnya berfungsi Kondisi: Sangat baik Dsdpfx Aaoub Umqsvscp Unit Penutup Unit penutup: hidraulik Gaya penutupan: 1300 kN / 130 ton Jarak tiang: Tanpa tiang Jarak pembukaan: 606 mm Tinggi pemasangan alat: 250 mm Pusat: 125 mm Jarak pelat maks.: 850 mm Ukuran pelat: 750 mm / 850 mm (L x T) Unit Injeksi 2K Sekrup: ⌀ 25 / 22 mm Berat injeksi: 72/35 gr Tekanan injeksi: 2391/2066 bar Volume injeksi: 79 / 38 ccm Jarak/gaya ejektor: 61 kN / 100 mm Detail Robot GEKU SR 500 ST Sistem Kontrol: Simotion Sumbu X: 600 mm Sumbu Y: 1400 mm Vertikal Sumbu Z: 2500 mm Horizontal Sumbu Putar A: SWM 45 Sumbu C: Servo Grip: SWS16 Sumbu B: Tidak ada Mesin ini tersedia segera di gudang kami di Hannover/Jerman dan telah diuji. Garansi Garansi hingga pengoperasian pertama Pemuatan/Pengiriman Pemuatan gratis ke truk pembeli atau pengiriman gratis dengan biaya pengangkutan / pengiriman ke seluruh dunia dimungkinkan dari gudang kami di Hannover/Jerman Pembiayaan - Atas Permintaan - Opsi Sewa-Beli Harga: Atas Permintaan

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 113 kW (153,64 hp), jenis pendinginan: air, berat keseluruhan: 943 kg, lebar total: 2.100 mm, panjang total: 2.270 mm, tinggi total: 1.330 mm, kapasitas pemanasan: 117 kW (159,08 hp), Perlengkapan: kompresor, Chiller/pompa panas udara bekas Carrier 30 RQS 120 berpendingin udara dengan R410A. Lengkap dengan 3 kompresor scroll Copeland ZP182KQE-TFD-604, penukar panas yang diperkuat, kipas Carrier PM 100-110mm – 50 Hz – 0,53/0,18 kW – 720/500 RPM, receiver Mecasem OOPSG001171100C dengan volume 23,5 liter, serta panel kontrol dengan display Carrier Pro-Dialog+. Spesifikasi Merk: Carrier Tipe: 30 RQS 120 Tipe produk: Chiller Air / Pompa Panas Refrigeran: R410A Berat: 943 kg Dimensi: 2270x2100x1330 mm (PxLxT) Kompresor: 3 Copeland ZP182KQE-TFD-604 Display: Carrier Pro-Dialog+ Jumlah kipas: 2 Spesifikasi kipas: 50 Hz – 0,53/0,18 kW – 720/500 RPM Tahun pembuatan: 2013 Jumlah stok: 1 Djdpfx Aaorlk E Nevscp

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Dcjdpfxog A D Ans Aavjp Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, en-de-20240616-01 Dcodpfx Aaet Akcfovep