Dudukan pemoles

METABO 72730

Tahun pembuatan: 1990, Kondisi: baik (bekas), - double-sided brush machine Metabo 7445 - Metabo 72730 - 4 kW - Shaft diameter 35 mm - 1500 rpm Fjdobdm Tajpfx Abhjfu

Kondisi: bekas, Tahun pembuatan: 1992, translate-001 Fedpfefrvzvsx Abhsfu

Kondisi: siap digunakan (bekas), - Double-sided grinding and polishing stand - with x 1.5 kW - Speed: 1420 rpm Ffodsdz Uzbepfx Abhou - Polishing shaft height: 600 mm - Tapered polishing shaft

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard Ffjdpfx Abokvnumeheu There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), IMM 72780 Double-Sided Polishing Machine Like new condition, the machine has seen very little use. TECHNICAL DATA Ffjdpfxeu Hanye Abhju Polishing disc: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or timeliness of the information provided.

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m Fjdpfx Aod Iipmsbhofu SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending of sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Fsdpfx Aodzqblobhjfu Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Fodpora Rr Eofx Abhjfu Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Ffodpfx Ajph Uk Nebhou Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: diremajakan ulang (bekas), Druck: 150 t Stößelhub: 140 mm Fodpogd H Tpefx Abhofu Tischgröße: 510 x 530 mm