Hydr. mesin tekuk bundar tiga gulungan

MG 3100 x 16/12 mm

Kondisi: siap digunakan (bekas), Sertom-brand hydraulic plate bending machine, working length 25,000 mm with feed-in, two bottom rollers of 300 mm diameter, top roller diameter 318 mm, maximum sheet thickness 14 mm. Roller drive motor power: 22 kW; movement motors: 5.5 kW; lifting frame: 2.5 kW. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Ffjdpjnr Npysfx Adgot

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Fjdsd Auacopfx Adgjft Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: baru, Tahun pembuatan: 2024, panjang rol: 3.000 mm, ketebalan lembaran (maks.): 90 mm, ketebalan pelat baja (maks.): 90 mm, tebal plat aluminium (maks.): 90 mm,

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Fsdpfxed E A I Ij Adgeft Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: bekas, various types available Ffsdpedc A Sbefx Adget

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Fsdpfexddvnox Adgjft Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Technical details: Ffodjw Au I Ijpfx Adgst Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Various accessories *

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Fsdpou Nc Emsfx Adgoft Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Fodpfod Ab H Hsx Adgjft Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, jam operasional: 6.149 h, berat keseluruhan: 19.000 kg, Doppstadt DW 2560 Buffalo - Year of manufacture: 2005 - Operating hours: 6,149 - Engine: Mercedes Benz 354 HP - Roller: 17 teeth - Overband magnet - Remote control - Hydraulic drive (self-propelled) Ffedpfxow Ebaps Adget Machine has been overhauled and is available immediately.