Pusat permesinan vertikal

Mikron UCP 800 DURO

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan gandar Y: 30.000 m/menit, laju pemakanan sumbu Z: 30.000 m/menit, produsen pengendali: HeidenHain iTNC530, tinggi total: 3.200 mm, panjang total: 3.200 mm, lebar total: 2.400 mm, lebar meja: 600 mm, panjang meja: 600 mm, beban meja: 500 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 18.000 W, 5-axis machining center MIKRON - UCP 800 MACH-ID 9640 Manufacturer: MIKRON Model: UCP 800 Control system: Heidenhain iTNC530 X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 500 mm A-axis: +120° to -100° B-axis: 360.000° Table length: 600 mm Table width: 600 mm Table load capacity: 500 kg X-axis feed rate: 30,000 mm/min Y-axis feed rate: 30,000 mm/min Z-axis feed rate: 30,000 mm/min Tool holder: HSK63/ISO/BT/MK Spindle power: 18 kW Spindle speed: 20,000 rpm Tool changer: 30 positions Internal coolant supply: 20 bar Number of controlled axes: 5 Iedpozkry Iofx Afretl Chip conveyor: yes Coolant unit: yes Length: 3,200 mm Width: 2,400 mm Height: 3,200 mm Weight: 10,000 kg Please Note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but cannot be guaranteed for accuracy. Therefore, no representation or contractual terms are implied. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 2003, Data Teknis: Diameter Putar: 680 mm Jarak antara senter: 1000 mm Kecepatan putar: 2800 rpm Chuck: ø300 mm Dimensi (perkiraan): 5560 x 2400 x 2130 mm Berat (perkiraan): 10.000 kg Perlengkapan: - Kontrol: Heidenhain CNC Pilot 4290 - Revolver 12 posisi VDM 40 - Sumbu C Itodpfjyfnqgex Afrjl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 4.231 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.44.00.407, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain iTNC 530, berat keseluruhan: 11.000 kg, RINCIAN TEKNIS Langkah kerja sumbu X: 800 mm Langkah kerja sumbu Y: 650 mm Langkah kerja sumbu Z: 500 mm Rentang putar sumbu C: 360° Pemasangan alat: HSK-E63 RINCIAN MESIN Kontrol: Heidenhain iTNC 530 Jenis spindle: NCD 150 PL, NCD 200 PL Jam operasional Kontrol ON: 30.064 jam Jam operasional Mesin ON: 10.322 jam Jam operasional Eksekusi Program: 4.159 jam Jam operasional Drives ON: 7.331 jam Itjdpfxozf E I Ij Afrsl Jam operasional Spindle ON: 4.231 jam Dimensi & Berat Dimensi (P x L x T): 3.400 x 3.000 x 2.800 mm Berat total: 11.000 kg PERLENGKAPAN Konveyor serpihan Sistem pendingin dengan sistem filter Dokumentasi tersedia

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, kapasitas angkut: 5.000 kg, tinggi angkat: 5.000 mm, jenis bahan bakar: diesel, tipe tiang: triplex, produsen motor: Yunnei EUR5, tinggi total: 2.650 mm, panjang total: 3.900 mm, lebar total: 2.080 mm, Perlengkapan: garpu palet, geser samping, kabin, pelindung depan, pencahayaan, pendingin udara, penggerak semua roda, perpanjangan fork, forklift medan dengan penggerak 4x4 mesin diesel EUR5 Yunnei DEF30CZEF5 74kw 100HP kapasitas angkat 5T berat forklift 7,2T tiang triplex tinggi pengangkatan 5m ban pneumatik kabina dengan AC panjang fork 1220mm tambahan ember dalam set fork tambahan sepanjang 2000mm Itjdeuzivvspfx Afrel forklift BARU

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 027.0149, Mesin Gerinda Silinder CNC Dalam-Luar S33 CNC sedang dalam proses – overhauling Waktu pengiriman: sekitar 14 minggu Itsdjzcuwbjpfx Afrol Data teknis dan aksesori sesuai PDF terlampir Foto = hanya foto contoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Itsdpfx Afozb Evlorsl Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 650 mm, lebar penggilingan: 300 mm, diameter roda gerinda: 160 mm, berat keseluruhan: 2.550 kg, daya: 4 kW (5,44 hp), Brand: CCP - STANKOIMPORT Model: 3E711B Grinding dimensions: 650x300mm (X, Y) - 320mm (Z) Magnetic table surface: 630x200mm Maximum table load: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum wheelhead travel: 365mm Manual table travel: (700mm, 250mm) Table longitudinal feed speed: 2 - 30 m/min Cross feed speed: 0.01 - 1.5 m/min Vertical feed graduation: 0.002mm Micrometric vertical feed graduation: 0.0005mm Cross feed graduation: 0.5mm Micrometric cross feed graduation: 0.001mm Cross travel per handwheel revolution: 5mm Vertical travel per handwheel revolution: 0.20mm Automatic cross feed (longitudinal table stroke): 0.2 - 30mm Ijdpeqy H Dpefx Afretl Automatic wheelhead feed: 0.002 - 0.08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kW Weight: 2550 kg.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, 001 Itodpoy Txk Uefx Afrjl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Ijdpfoxv Av Rex Afrjtl Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Itsdpfevwgl Njx Afrel Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW