Pusat mesin

MIKRON UM 600

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 15.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 94.98.030, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 450 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 100 rpm, tinggi total: 2.000 mm, lebar total: 2.000 mm, panjang total: 2.800 mm, lebar meja: 520 mm, panjang meja: 900 mm, posisi kepala milling: mittig, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 6.000 rpm, kecepatan rotasi (min.): 100 rpm, beban meja: 400 kg, berat keseluruhan: 3.500 kg, tegangan masuk: 400 V, berat benda kerja (maks.): 100 kg, arus masuk: 40 A, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Good used CNC milling machine with low operating hours. Used exclusively for repairs and small-scale production. Comes with a comprehensive range of accessories as shown in the photos: vise, chuck, milling cutters, plates, tap holders. Equipped with a Benz high-speed wet spindle up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gear stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Tool holder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Travel paths in automatic mode Longitudinal spindle feed (X-axis): 600 mm Transverse spindle slide travel (Y-axis): 500 mm Vertical spindle slide travel (Z-axis): 450 mm Feed drive (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse speed X/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Fpsdpfoywn Siex Am Ssh Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Number of tool positions: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in the drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connections Total installed power: 15.8 kW Effective and connected power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, CNC lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and subspindle Control: Mazatrol PC Fusion CNC 640T Technical data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360° / 0.001° Second spindle: Fpjdex Hgl Hopfx Am Soh Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Tool turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time - 1st position: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 11.320 h, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, daya motor spindle: 15.000 W, berat alat: 13.000 g, jumlah sumbu: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It offers a maximum X-axis travel of 600 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. The machine features a robust table measuring 520 x 900 mm with a maximum table load capacity of 400 kg. If you are looking for high-quality machining capabilities, we recommend considering the vertical machining center MIKRON UM600 TNC 410/426, which we have available for sale. Please contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm • Max. spindle torque (44% duty cycle): 800 Nm • Number of gear stages: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and high-speed spindle • Feed drives (AC) • Programmable feed rate X/Y: 0 - 15,000 mm/min • Programmable feed rate Z: 0 - 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Tank capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm Fjdpfsy D Thvex Am Ssph • Max. tool weight in TCD 44: 6 kg • Max. workpiece weight in drum magazine: 200 kg • Chip-to-chip time: 20-25 s • Tool change time: 12-16 s • Electrical connection • Total installed rated power: 15.8 kW • Effective/connected load: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper size SK 40

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, For sale: Mikron UM 600 Machining Centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, the machine is equipped with a mounting arm for the conversion of the milling head (see image 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organised across Europe for an additional charge if requested. Prices are subject to VAT. Fpsdpewx Naqjfx Am Ssh Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchasing and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Die Maschine ist in gutem Zustand. Fodpfx Aswx Rafjm Soph X 750 mm Y 400 mm Z 500 mm 10.000 U/min

Kondisi: bekas, Tahun pembuatan: 1997, x-weg 600 mm y-weg 500 mm z-weg 450 mm steuerung heidenhain tnc 426 pb Fodpfsykb Hlox Am Sjph werkzeugwechseleinrichtung 22-fach werkzeugaufnahme sk40 drehzahl 5-6.300 u/min tischgröße 900 x 530 mm tischbelastung 400 kg gesamtleistungsbedarf 9 kw maschinengewicht ca. 3550 kg raumbedarf ca. 2,2 x 2,7 x 2,05 m 3-achsen bearbeitungszentrum vertikal mikron um 600, bj. 1997 technisch in einem top-zustand, alle führungen wurden frisch eingeschabt. die spindel wurde neu gelagert, seitdem 262 stunden wenig im einsatz. neues leistungsteil für spindelantrieb ist eingebaut. zubehör: tastsystem heidenhain ts 642 2 neuwertige spannstöcke werkzeughalter sk40

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1–3000 mm/min Rapid traverse: 6 m/min Clamping surface of table: 1100 x 600 mm Table feed: 1–3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Equipment: Fpedpfx Aju Nda Eem Sjh - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, en-de-1 Fpjdpfx Amju A Dgrj Seh

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Fanuc R-2000iB/210F robot (E-25677) Fpsdpfx Ajizth Hom Sjh Year of manufacture: 2006 Maximum arm reach: 2,655 mm Controller: Fanuc R-J3IC Payload: 210 kg 5 robots available, each equipped with a different tool on the arm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, MAHO MH 500W with Heidenhain TNC 320 Fpedexw N S Ijpfx Am Ssh The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming in line with current standards. Technical data: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z-350 mm - Spindle mount SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20-3150 rpm, infinitely variable - Feed range 1-3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld operating device - Safety enclosure Inspection or test run under power on site is of course possible. We are happy to offer you transport, installation, and commissioning at your site. Everything from a single source: We, Baumgärtner CNC GmbH &, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and those of other renowned manufacturers. We support you! From machine purchase, transport, and installation all the way to commissioning and subsequent maintenance or repair work – you can count on us.