Pusat permesinan vertikal

MIKRON VCP 1350

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 750 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 426 M, tinggi total: 3.150 mm, berat keseluruhan: 10.100 kg, kecepatan spindel (maks.): 24.000 rpm, berat alat: 8.000 g, jumlah sumbu: 3, This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control unit, with an X-axis travel of 1350 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and is equipped with a Step-Tec HSK-A63 high-speed spindle with 24,000 rpm. Ideally suited for precision machining, it offers a tool magazine capacity of 46 tools. Contact us for more information about this machine. Additional Equipment Dsdpfxoyarz Ee Ag Dekl • High-speed precision machining Machine Advantages Technical Advantages • Equipped with automatic spindle orientation and high-speed spindle (24,000 rpm) • Coolant pressure: 30 bar (standard) / 40 bar (optional high pressure) • Tank capacity: 180 l (optional 600 l) • Direct drive AC motor • Measuring system: direct linear scales on all axes • Clamping surface: 1425 x 860 mm • Magazine capacity: 46 tools (standard), 92 tools (optional) • Max. magazine load: 200 kg • Tool-to-tool changeover time: approx. 12 seconds • Available for inspection Additional Information Machine still under power Dimensions Machine Depth 4130 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Dkedpsx Ap Hpefx Ag Dsl Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: baik (bekas), Tahun pembuatan: 2000, Translation: Dkjdpoi El Iaofx Ag Dol Travel paths: 1350 x 900 x 750 mm Machine control: Heidenhain TNC 426 Equipment: 46-position tool changer, SK 40 milling spindle, 12,000 rpm, including coolant through spindle (IKZ system) and chip conveyor Glass scales, 3D probe: Renishaw MP12 Extensive accessories available upon request! Please contact us if interested!

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Djdpfx Askvnumog Dekl Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Dksdpfxjylw Ste Ag Djl Technical Specification Taper Size: SK 40

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), HYDRAULISCHE PRESSE MECAMAQ DRUCKKRAFT 350 t HUB 350 mm TISCH (LINKS-RECHTS) 600 mm TISCH (VORNE-HINTEN) 750 mm LEISTUNG 15 kW Abmessungen: Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Dedpfofmqqlex Ag Djkl Gewicht: 5.700 kg

Kondisi: sangat baik (bekas), Boy 80M Year of manufacture: 1998 Clamping force: 80 tonnes Dkodpfxjmt Hh Ee Ag Dsl Screw diameter: 36 mm Shot weight: 132 g Tie bar distance: 410 x 358 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1975, -KOM 1002- Offered here is a press by HYDRAP, model HKPS8000. Technical data: Model: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (center) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: Hydraulic Dkedjg Ufvbopfx Ag Dsl Drive power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E With your purchase, you will receive a proper invoice with VAT shown separately. We have many more interesting items for sale. Feel free to check out all our listings. If you are interested or have any questions, please contact us via the messaging function!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.44.00.407, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 500 kg, tinggi total: 3.200 mm, lebar total: 3.200 mm, lebar meja: 600 mm, tinggi meja: 2.400 mm, panjang meja: 600 mm, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 20.000 rpm, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 15.000 W, jumlah spindel: 1, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MIKRON-UCP800Duro-2018 Dsdpfxjx D Ux To Ag Djkl