Latihan pilar

MIOTAL® SB 35 SG

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with a TNC113 3-axis active control system, renowned for its user-friendly operation. This later model from 1989 features central lubrication, an electric coolant pump, and a machine lamp, among other upgrades. The machine has undergone a comprehensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out: - Spindle bearings in the milling head replaced - New paintwork - Various standard components renewed, such as handles, oil sight glasses, push-buttons, etc. - Worn parts such as drive belts replaced - Bellows partially renewed - Gibs adjusted - And much more... Availability: Immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: Rigid angle table Travel (X/Y/Z): 300mm / 160mm / 340mm Quill Stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed rate: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine feet Ksdpfepy Eldjx Adwend Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - On request, additional accessories such as tools can be ordered directly - On request, we can install additional accessories such as safety devices - We are happy to take care of shipping and/or installation

Kondisi: bekas, Drilling capacity in steel (diameter): 45 mm Throat depth: 350 mm Drilling stroke: 180 mm Spindle taper: MK 4 Speed range: 30 – 765 rpm Table size: 720 x 560 mm Total power requirement: 3.4 kW Weight: 950 kg Dimensions: 1200 x 800 x 2300 mm Kedpfx Adovuz Tvowsnd Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable drilling depth stop - Emergency stop foot switch - Drill chuck

Kondisi: baik (bekas), Mesin bor IMATEC AV-32 Kapasitas bor pada baja ST 60: 32 mm Kepala spindel bor: MK 3 Langkah spindel bor: 150 mm Kecepatan spindel bor tanpa tingkat: 80 – 1170 rpm Feed Jangkauan lengan: 290 mm Jarak maksimum meja – spindel bor: 780 mm Meja dengan 2 alur-T: 480 x 400 mm Knsdpfx Asv A S Rhjdwod Penyesuaian tinggi menggunakan rack & pinion dengan engkol manual Daya: 400 V / 0,9 / 1,3 kW Kebutuhan tempat ± L 600 x T 2100 x D 900 mm Berat ± 420 kg

Kondisi: bekas, ALZMETALL Sturdy Column Drilling Machine Type AB 5/S Year of manufacture: approx. (1983) Serial number: 183 Drilling capacity in steel (diameter): 60 mm Throat depth: 400 mm Power requirement: 4.4 kW Machine weight: approx. 1.7 t O F F E R We can offer you the following machine without obligation, subject to prior sale and errors excepted, ex stock: ALZMETALL Sturdy Column Drilling Machine Type: AB 5/S Year of manufacture: approx. (1983) Serial number: 183 Kjdpfx Adowftt Iewend Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 65 mm Spindle taper: MK 4 Throat depth: 400 mm Column diameter: 220 mm Quill stroke: 240 mm 5 feed rates: 0.1/0.2/0.3/0.4/0.5 mm/rev Table size: 700 x 500 mm Table vertical adjustment: approx. 600 mm Table rotation around column: 360° Clearance height from lower table to drill spindle: 1,128 mm Spindle speed ranges: Speed range 1 (infinitely variable): 30 – 135 / 135 – 600 rpm Speed range 2 (infinitely variable): 60 – 270 / 400 – 1,250 rpm Total drive power: approx. 4.4 kW - 380 V - 50 Hz Weight: approx. 1,700 kg Accessories / Special Features: • Very robust column drilling machine • Automatic quill feed with depth stop and cut-off • Table size approx. 700x500 mm • Quill travel with adjustable depth stop Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. Further pillar and column drilling machines always in stock, please contact us for details.

Kondisi: sangat baik (bekas), Drilling capacity in steel (diameter): 45 mm Throat depth: 300 mm Quill stroke: 160 mm Spindle taper: MK 4 Table clamping surface: 600 x 500 mm Table adjustment: 550 mm Knsdpsvn U Umsfx Adwod Total power requirement: 0.8 kW Machine weight approx.: 0.5 t Space requirement approx.: 0.8 x 0.6 x 1.8 m Automatic feed.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery Knedpfxjthd Shj Adwed

Tahun pembuatan: 1970, Kondisi: baik (bekas), nomor mesin/kendaraan: Unbekannt, OFFER Technical Data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity maximum in steel ST 60: 32 mm - Drill spindle taper: MK 3 long spindle - Quill travel: 180 mm - Infinitely variable spindle speeds: approx. 140 – 1,600 rpm - 3 power feed rates: 0.1 ; 0.2 ; 0.3 mm/rev Knjdpfx Aehglvksdwjd - Throat depth: 290 mm - Max. distance table – spindle: 620 mm - Rotary table with 2 T-slots: 450 mm - Height adjustable via rack and hand crank - Coolant system - Drive: 380 V / 0.9 / 1.3 kW - Space requirement approx.: W 750 x H 1900 x D 700 mm - Weight approx.: 280 kg

Kondisi: bekas, Tahun pembuatan: 1982, Werkpiece weight 60 kg Workpiece length 700 mm Diameter 500 mm Total power requirement kW Kodet Hxbqepfx Adwond Machine weight approx. t Space requirement approx. m O F F E R We can offer you, subject to prior sale and errors excepted, ex stock: H O F M A N N Germany Horizontal electronically dynamic grinding wheel and worm grinding wheel balancing machine Type EO-Re / MC 10 Year of manufacture: 1982, modernized in 2008 and retrofitted with MC 10 control Software: MC 10 and measuring transducer PMG 81 _____ Balancing dimensions Ø 500 mm x length approx. 700 mm Test piece weight approx. 5 – 60 kg Balancing speed approx. 650 rpm Two planes, journal Ø 20 – 50 mm, agate prisms, drive via universal shaft. Achievable accuracy: 1 mmg/kg Further technical data can be submitted upon request. Weight approx. 500 kg Ideal machine for balancing grinding wheels Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. More than 300 good used machines in stock, please contact us for inquiries.

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Knedpfjk Hdu Dsx Adwsd Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Kjdpfxjh Ib T Uo Adwsnd Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.