Mesin kawat EDM

Mitsubishi FA 20 S

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06F2S765, berat benda kerja (maks.): 1.500 kg, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, The machine is currently serviced and in good condition. Wear parts have been extensively replaced. Over the past four years, the EDM machine has seen very little use. Transportation, installation, and operator training can be arranged for an additional charge. Gbsdowtd Edjpfx Adtsg

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. Gsdpfxotyyn Hj Adtsbg 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 250 mm, Dijual mesin wire cut Mitsubishi FA20S. Untuk informasi lebih lanjut silakan hubungi kami melalui email atau telepon. Tersedia juga beberapa suku cadang untuk Mitsubishi FX20 tahun 2000. Godpex Rprqjfx Adtebg

Kondisi: bekas, Tahun pembuatan: 2012, Travel: X 500 mm / Y 350 mm / Z 300 mm. Water bath machine. Automatic wire threading. Gbjdjuu Dl Ropfx Adteg

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Godpfst Tqrnex Adtjbg Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Gedpfx Aotzyx Tsdtsbg

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 500 mm, rentang pengukuran sumbu Z: 300 mm, Visio 500 mesin ukur 3D optik/taktile Ruang gerak 453 (400 X, 500 Y, 300 Z) Perangkat lunak pengukuran: PC-DMIS CAD Versi 2015 Gudang pengganti probe 6 slot, dengan total 2 modul TESASTAR MP Silent PC Big Tower dengan Windows 7 (semua sudah terinstal dan siap pakai) Gbsdpfx Asiyymrjdtsg Kamera dengan zoom optik 200x, pencahayaan cincin/koaksial dan transmisif (diascopic) Semua berfungsi penuh. Sumbu Y memiliki goresan ringan, sudah dihaluskan. Tidak mempengaruhi fungsi atau akurasi.

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), Boschert EASY SHARP Tool Grinding Machine Configured for TRUMPF Tool System (AMADA system optional) Machine for punch tool maintenance with a cooling system and particularly powerful motor, making it suitable for use with diamond grinding wheels as well. Used machine – currently being overhauled Equipment for TRUMPF tool system up to size III Accessories: - Tool holder for flat and Whisper punches - Die holders for sizes I, II, and III - New corundum grinding wheel - Dressing diamond - Overhauled cooling system and machine base Technical data: - Grinding wheel diameter: 175 mm - Height adjustment: 150 mm - Working area: 400 x 150 mm - Motor power: 2.2 kW - Motor speed: 2825 rpm Optional: Adapter for Amada system available Pictures similar Godpfxeid I T Is Adtjbg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.160 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: FANUC, model controller: FANUC 0i-MD, tinggi total: 3.170 mm, panjang total: 5.500 mm, lebar total: 2.892 mm, lebar meja: 760 mm, panjang meja: 2.160 mm, beban meja: 1.800 kg, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 800 mm, daya motor spindle: 18 W, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Gsdpew D Aynsfx Adtjbg

Kondisi: baik (bekas), Tahun pembuatan: 2002, Control system: HEIDENHAIN TNC 430 Spindle speed: 20 - 9,000 rpm Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Godswglfxopfx Adtjbg Tool changer with 16 stations Rotary table with B and C axis Clamping area: Ø 700 x 500 mm Max. table load: 200 kg Infrared probe for workpiece measurement