Mesin pengukur koordinat

MITUTOYO Crysta-Apex S123010

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system. Ksdpfx Acsw Df A Sj Hswu

Kondisi: baik (bekas), Placa de mármol Longitud: 3500 mm Anchura: 1500 mm Ksdpfx Acjig Hu Nj Hewu Espesor: 300 mm Altura sobre patas: 930 mm Número de patas: 5 1 pequeño defecto en la parte superior (L 150 mm x A 20 mm) – ver foto Peso: aprox. 3 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter Kwsdpfsxmhdnjx Ac Hsu - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 200 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° Kwodpfxeuhazgs Ac Hju SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 BACK WORKING STATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 mm - Machine height: 1,832 mm - Machine weight: 2,200 kg MACHINE HOURS - Operating hours: 32,264 h EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.200 mm, rentang pengukuran sumbu Y: 2.000 mm, rentang pengukuran sumbu Z: 1.000 mm, Measurement ranges Kwsdpfx Acodv I Abo Hou X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000]µm CNC control: Renishaw UCC S5 Handbox: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Software: Inspect3D Inca V6, new license (all languages) Original year of manufacture: 2014, modernized in 2017 and 2025 Trade-in against other CMMs possible

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 77.711 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain iTNC530, pergerakan cepat sumbu Z: 45.000 m/menit, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Hermle C30 U Siemens 840D Jam kerja mesin: 77.711 jam, jam kerja spindle: 16.294 jam - Spindle HSK-A63, 10.000 rpm - 32 tempat alat - Meja putar SRT 280 mm dengan sistem penjepit terintegrasi SK50 (jika tidak diperlukan, dapat ditutup atau diubah menjadi sistem penjepit titik nol) - Pendinginan eksternal dengan cairan pendingin - Pendinginan internal dengan filter pita kertas, tekanan 80 bar - Pistol pembilas serbuk - Konveyor serbuk - Modul pengoperasian manual - Pintu kabin otomatis - 32 tempat alat ditambah 87 tempat tambahan (ZM87) - Kompensasi suhu - Pengukuran alat BLUM sisi - Probe ukur Renishaw - Wadah serbuk - Lampu status Mesin telah diperiksa sepenuhnya, tersedia protokol geometri dan pengukuran uji kebulatan. Mesin dapat dilihat dan diuji dengan listrik kapan saja. Kwodpfxoxcp R Ie Ac Hju Kondisi sangat terawat.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 500 mm, rentang pengukuran sumbu Y: 700 mm, rentang pengukuran sumbu Z: 400 mm, Perlengkapan: Pelat tipe tersedia, mt1 Kodpfxsu E Uzxs Ac Hewu

Kondisi: baru, Pressure 30 t Stroke 350 mm Table surface working width 750 x 260 mm Pressure 221 bar Oil capacity 37 l Working speed max. 9.8 mm/sec Return speed 14 mm/sec Total power requirement 3 kW Machine weight approx. 385 kg Cylinder internal diameter [mm]: 130 Piston rod diameter [mm]: 55 Piston base diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic power unit with variable speeds - Height-adjustable worktable Kedpfx Acji A S I Do Hewu - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorised, height-adjustable worktable. Equipped with pressure regulation, pressure gauge, variable speed, and a joystick for moving the piston up and down. The joystick also allows you to adjust the speed, making this motorised hydraulic press ideal for precision work.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, tinggi total: 2.777 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 660 mm, berat keseluruhan: 1.265 kg, jumlah sumbu: 3, This 3-axis Hexagon GLOBAL CLASSIC was manufactured in 2019. This CMM unit is ideal for precision measurements and provides a reliable solution for improving quality control processes. Take advantage of the opportunity to purchase this Hexagon GLOBAL CLASSIC CMM unit. Contact us for more information. Additional Equipment Kwjdpfx Acox D Em Us Heu • Compressed air supply: Minimum air pressure: 0.5 MPa / Maximum air consumption: 70 NI/min / Minimum supply pressure: 0.5 MPa (5 bar) / Minimum inlet flow rate (ANR) UNI ISO 8778: 7.5 dm³/s • Air quality: Maximum oil concentration in the air: 5 mg/m³ / Maximum particle size in compressed air: < 0.04 mm / Maximum concentration of solid particles in compressed air: 3(*) • Dynamic performance: 3D positioning speed: 510 mm/s / Maximum acceleration: 1700 mm/s² / Resolution: 0.039 µm Machine advantages Technical advantages of the machine • Maximum workpiece weight: 900 kg Main system: • Dell Precision Tower 5820 workstation • Pre-installed measurement software PC-DMIS 2019 Probe/Sensor system: • HP-S-X1S scanning sensor • Automatic probe changer HR-X1S with 6 slots Calibration and fixturing equipment: • Standard calibration artifact • Swift-Fix kit with silver baseplate (400 × 600 × 12 mm) Accessories (Standard probe set HP-S-X1S): • 1× probe Ø 1.5 mm, 20 mm length • 1× stylus Ø 3 mm, 20 mm length • 1× stylus Ø 5 mm, 20 mm length • 1× stylus Ø 3 mm, 50 mm length • 1× stylus Ø 5 mm, 50 mm length • 1× stylus Ø 5 mm, 100 mm length • 1× wrench • 2× spring pins • 1× storage case Dimensions Machine depth: 1277 mm

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Kedpfxjvzhf So Ac Hewu Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation