Robot industri

Mobile Industrial Robots (MiR) MIR100

Kondisi: baru, Tahun pembuatan: 2026, Penggiling bola sangat cocok untuk menghancurkan bahan baku mineral. Iedpfepahwvsx Alnetl

Tahun pembuatan: 2026, Kondisi: baru, Electric Flow Pasteurizer – up to 400 l/h * Water bath kettle * Electric heating: 13.5 / 18 / 27 / 31.5 kW – 400 V * 150 l stainless steel tank with thermal insulation * Stainless steel tube heat exchanger Iedjt Uzitopfx Alnotl * Automatic low-temperature safety cut-off (compressed air required) * Stainless steel juice pump * Chassis with mount for temperature cut-off switch and pump ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer operation

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 390 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 827 kg, Carrier chiller air water Model: 30RBS-140B0181-ME, tahun 2016, R410A 135 kW (116.100 frigoria), hanya dingin, konsumsi maksimum: 61 kW. Dimensi: 2258x2050x1330 mm, heat exchanger tipe pelat, berat: 827 kg. Mesin telah diuji sepenuhnya di gudang kami dengan gas, dapat diperiksa. Itjdpeyfwuzjfx Alnel Referensi: 1137

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Itodpfxsvllxdo Alnjl Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 800 kW (1.087,70 hp), berat keseluruhan: 4.500 kg, Perlengkapan: kompresor, pendingin beku, Chiller unit Trane RTUB224 Iodpjrzq Arefx Alnstl Cooling capacity: 800 kW Number of cooling circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C with a condensing temperature of +40°C.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 3.220 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 600 mm, jumlah slot dalam magazin alat: 55, tinggi total: 3.600 mm, panjang total: 7.500 mm, lebar total: 4.200 mm, berat keseluruhan: 15.500 kg, panjang meja: 3.900 mm, lebar meja: 750 mm, model controller: Heidenhain, jarak dari tengah meja ke hidung spindel: 720 mm, daya motor spindle: 35 W, pergerakan cepat sumbu Z: 40 m/menit, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 30 rpm, beban meja: 3.500 kg, diameter alat: 80 mm, panjang alat: 330 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mobile column vertical machining center "HEDELIUS model CB80 MAGNUM" with Heidenhain TNC-530 Itodpfxsv Sdc Us Alnsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Iodjzb H Tfepfx Alnetl Machine operating hours: Power-on hours: 29,447 Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 600 mm, beban meja: 600 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 15.000 W, jumlah sumbu: 5, en Itsdpfoyia Tlex Alnsl

Kondisi: sangat baik (bekas), Loos 1000kW kontainer pemanas darurat dengan pembakar gas. Dapat diubah ke minyak atau biogas. Itjdpfx Ajy Evltelnjl

Kondisi: baru, Tahun pembuatan: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Control type: CNC control Control system: Siemens / Heidenhain Location: Istanbul Country of origin: Türkiye X-axis travel: 1,350 mm Y-axis travel: 1,500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360° Spindle taper: HSK-T100 Rotary table diameter: 1,000 mm Table load capacity: 2,000 kg Tool magazine with: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3,200 mm Machine width: 6,400 mm Machine height: 4,050 mm Approx. machine weight: 40 t Additional information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center offering 5-axis simultaneous machining, combining advanced technology in a compact design. Manufactured in 2024, this machine is available for immediate use and ideally suited for precise machining of medium-sized workpieces across various industries. Key features: Compact performance: Travel distances of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), with a table load capacity of up to 2,000 kg, provide optimal conditions for flexible applications. 5-axis simultaneous machining: Featuring a B-axis (°) and a C-axis (360°), even complex geometries can be machined with high accuracy. High-performance spindle: The spindle achieves speeds up to 15,000 rpm, a maximum torque of 220 Nm, and a drive power of 35 kW—ideal for demanding milling tasks. Enhanced capacity: A tool magazine with 48 stations and HSK-T100 interface ensure quick tool changes and efficient processes. First-class speed: With rapid traverse rates of 48 m/min on all axes, machining times are reduced to a minimum. Itedpfxoxmd S Ij Alnsl Technical highlights at a glance: - Travel distances: X 1,350 mm / Y 1,500 mm / Z 900 mm - Rotary table diameter: 1,000 mm - Max. table load: 2,000 kg - Spindle power: 35 kW - Spindle speed: up to 15,000 rpm - Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm - Weight: approx. 40 tons Additional advantages: Thanks to state-of-the-art controls (Siemens or Heidenhain) and a robust machine design, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer provides international service and comprehensive warranty coverage. Discover the IGREK FR 1000 T as your dependable partner for precise and efficient manufacturing—now available from stock. Contact us for further information!