MORI SEIKI NV4000

MORI SEIKI NV4000

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Podpfx Afjv Az Uce Espu Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Tahun pembuatan: 1971, Kondisi: bekas, en-GB:Technical Details: Ppodpfx Afovc Apbo Eju Maximum wheel diameter: 300 mm Module range: max. 5 / min. 0.5 Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1800 x 1850 x 2500 mm Control cabinet dimensions: No. 1: 1930 x 400 x 1920 mm No. 2: 800 x 230 x 1950 mm Exhaust system dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and diameters from 240 – 300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30′ Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1,900 rpm Supplied without dressing attachment Equipment: Approx. 77 various change gears, extension pipes, and various accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. Ppsdet Hw N Tjpfx Af Eeu * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Max. pitch diameter external gearing 300 mm Max. pitch diameter internal gearing 300 mm Max. outside diameter of workpiece (fixture) 450 mm Max. module 6 Max. gear width 100 mm Max. helix angle (with tool Ø 125 mm) +/- 45° Stepless stroke rate 130 - 1300 strokes/min Workpiece weight 1000 kg Ppsdpfx Afsvu E Nue Eju Minimum distance table surface - tool spindle -55 / +300 mm Maximum distance table surface - tool spindle 200 mm Maximum spacing table surface - tool spindle 350 mm Manual column lateral shift +/- 25 mm Manual swiveling angle of the tool spindle +/- 0.5° Max. tool speed 15 rpm Max. workpiece speed 27 rpm Max. tool diameter 7 inches Voltage 400 V Frequency 50 Hz Max. supply current 70 A Total power consumption 48 kW Machine weight approx. 11 t Space requirement approx. 4.27 x 3.11 x 2.87 m Main spindle taper SK 45 Table bore 40 mm Control Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Model PSA 300 The CNC modular gear cutting machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical toothing, as well as any other profile achievable by generating or indexing shaping process. The work cycle is controlled by a CNC unit with a specific software for gear manufacturing. Application range --> The PSA 300 was designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical gearing - Gears with internal helical gearing

Kondisi: baik (bekas), Tahun pembuatan: 2014, Technische Daten auf den Fotos ersichtlich. Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Pedpfx Afsufp Sve Espu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, hurco-vmx30-specs-de Pedpfxex D Ikps Af Eopu

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer Psdovptmwspfx Af Eepu RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: baik (bekas), Tahun pembuatan: 2009, Mesin akan datang dengan robot. 42.000 rpm Ppsdpfexfu S Nsx Af Eju

Kondisi: baik (bekas), GENERAL SPECIFICATIONS Max. grinding diameter: 120 mm Grinding wheel width: 250 mm Min. grinding diameter: 1 mm Regulating wheel diameter: 304 mm Grinding wheel diameter: 508 mm DIMENSIONS AND WEIGHT Height: 1,700 mm Width: 1,500 mm Length: 2,750 mm Weight: 4,000 kg Ppsdorpnf Ajpfx Af Eju ELECTRICAL SPECIFICATIONS Grinding wheel spindle motor power: 15 kW Workhead spindle motor power: 1.8 kW Hydraulic motor power: 1.1 kW Total power: 20 kW Voltage: 220/380 V

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) Ppodpfxou Ngyzj Af Eou - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request