Pusat permesinan - vertikal

MORI SEIKI SH-630

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Control: FANUC 18i-MB Travel (X / Y / Z): 1,020 / 510 / 510 mm Feed Rate (X / Y / Z): 1 – 10,000 mm/min Rapid Traverse (X / Y / Z): 48,000 mm/min Table Size (W x D): 1,200 x 510 mm Spindle Speed: 15,000 rpm Internal Coolant Supply: 20 bar Tool Holder: BT 40 Tool Changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Hours: Spindle Hours: 9,310 Hodpfotz T Smsx Aa Nefb Accessories: RENISHAW tool measurement system type OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.160 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: FANUC, model controller: FANUC 0i-MD, tinggi total: 3.170 mm, panjang total: 5.500 mm, lebar total: 2.892 mm, lebar meja: 760 mm, panjang meja: 2.160 mm, beban meja: 1.800 kg, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 800 mm, daya motor spindle: 18 W, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Hedpfew D Aynsx Aa Nofb

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Hsdswl An Iopfx Aa Njfb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Vertical Machining Center / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of manufacture: 1999 The machine can be inspected under power and cutting operation by appointment. Well-maintained, very well-preserved, fully operational condition. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drive/axis motors: Hfsdpfxov Nxbye Aa Nob - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed speed: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax on X, Y, Z-axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive output (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine/changer: - Tool change system: Pick-up - Number of magazine stations: 24 positions - Max. tool diameter with adjacent free stations: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. magazine load (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Through-spindle coolant, 15 bar - Coolant unit (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE certification No guarantee for completeness and correctness of technical data and equipment. - Subject to prior sale -

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Hedsv Az Ucspfx Aa Nofb Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 610 mm, daya nominal (semu): 37 kVA, torsi: 236 Nm, produsen pengendali: Heidenhain iTNC530, model controller: iTNC530, lebar meja: 700 mm, panjang meja: 1.700 mm, beban meja: 700 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 16.580 h, daya motor spindle: 37 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 48, Perlengkapan: dokumentasi / manual, konveyor serpihan, 3-axis CNC machining centre Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Hsdjvz Tyuopfx Aa Nefb Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Electronic handwheel

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate. Hodpfx Aogabu Usa Nsfb

Kondisi: baik (bekas), Tahun pembuatan: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Turret: Number of tool stations: 12 pos. Number of driven tool stations: 12 pos. Hfjdpsv Drigsfx Aa Nob Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Rapid traverse: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total power requirement Machine weight approx.: 3.7 t Space requirements approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist extractor with electrostatic filter

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Hfedju Nc Emjpfx Aa Neb Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Kondisi: siap digunakan (bekas), X/Y/Z/U/V travel: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Hodouqackjpfx Aa Nsfb