Pusat permesinan vertikal CNC

MORI SEIKI SV 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, This 3-axis MORI SEIKI SV-50 was manufactured in 1997. The CNC milling machine is in good condition and was reportedly used only a few times for prototype work. It features a FANUC spindle with a speed of 10,000 rpm and a tool changer with 30 positions. Take advantage of this opportunity to purchase the MORI SEIKI SV-50 vertical machining center. Contact us for further details. Isdpfx Ahsyk Awfjhjig • Condition: Used, in good condition; reportedly used only a few times for prototyping • Spindle: FANUC (as supplied) • Tool changer: 30 positions • Table dimensions: approx. 270 x 250 x 230 mm (to be confirmed) Additional equipment • Chip conveyor (visual confirmation only) • Tool cabinet / cabinet with tool assortment • Machine vice (visual confirmation only) • Approx. 15 tool holders with collets (visual confirmation only) • Flexible collets • Approx. 20 milling cutters, various sizes (visual inspection required) • Dial gauge (listed twice; one included)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 13.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, berat keseluruhan: 15.800 kg, jam operasional spindle: 13.500 h, pasokan pendingin: 40 batang, Kami menawarkan mesin Deckel Maho DMU100P Duoblock tahun 2007 dalam kondisi baik, dengan total waktu penggunaan spindel hanya 13.500 jam. Pengendali Heidenhain iTNC530 Jarak perjalanan sumbu X: 1000 mm Jarak perjalanan sumbu Y: 1000 mm Iiodpfx Aszlyd Djhheg Jarak perjalanan sumbu Z: 1000 mm Pendingin internal 40 bar Spindel SK40 12.000 RPM Meja Ø1100 x 900 Mesin akan tersedia dalam stok dalam 2 minggu ke depan.

Kondisi: baik (bekas), Tahun pembuatan: 1997, CNC vertical machining center MORI SEIKI Type: SV500-50, Year 1997 Control: Fanuc MSC-518 Iiedpfx Ahowa Nvushog Table: 1100 x 600 mm Travel paths: X 800 – Y 510 – Z 510 mm, rapid traverse 32 m/min Spindle taper: BT50 Spindle speeds up to 6000 rpm Complete documentation available. Magnetic chuck is not included in the scope of delivery. For further data, see data sheets.

Kondisi: baik (bekas), Tahun pembuatan: 1998, CNC vertical machining center MORI SEIKI SV500-50, year 1998, Fanuc MSC-518 control system With pallet changer. Table size: 1100 x 600 mm Spindle taper: BT50, magazine with 40 positions Spindle speeds up to 6,000 rpm Travel paths: X 800 / Y 510 / Z 510 mm, rapid traverse 32 m/min Iijdowifzlopfx Ahhjg Machine without magnetic chip conveyor Complete machine documentation available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Kontrol Heidenhain iTNC 530 Perjalanan X/Y/Z: 2200 x 560 x 720 mm Kecepatan spindel 18.000 rpm Ijdszg Nmkspfx Ahheig Luas bidang penjepitan 2600 x 600 mm Maks. beban meja 2200 kg Kepala putar Pendingin internal 25 bar Magazin alat untuk 30 alat, SK 40 Pilihan sumbu C atau A Probe pengukur Heidenhain TS 640 Konveyor serpihan Filter pita kertas

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Travel path: 240 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 7.5 [kW] Ijdpjuhax Eefx Ahheig - Minimum C-axis resolution: 0.1 [degree] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 6,000 [rpm] TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] BACKWORKING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Operating hours: 56,433 [h] EQUIPMENT - CNC control: Fanuc - Drive for powered tools at: S2, S3, S5 V+H - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 325 mm, lebar total: 185 mm, panjang total: 483 mm, berat keseluruhan: 16 kg, jenis pendinginan: air, sekring listrik: 16 A, arus pengelasan pada siklus tugas 100%: 175 A, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 250 A, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Set lengkap: Mesin las WIG LORCH T 250 DC Basic Plus dengan pendingin air WUK 7 dan aksesori Dijual sebuah mesin las industri profesional dari merek premium LORCH, tipe T 250 DC Basic Plus, yang dikombinasikan dengan unit pendingin sirkulasi air inovatif WUK 7. Sistem ini dirancang sebagai perangkat portabel serbaguna serta perangkat bengkel yang lengkap dan unggul dengan teknologi inverter mutakhir. Produsen: LORCH (Dibuat di Jerman) Model: T250 DC Basic Plus termasuk pendingin air WUK 7 opsional Kondisi: sangat baik, berfungsi penuh Lokasi penyimpanan: Graz _____ Isi pengiriman (Set Lengkap): • Mesin las inverter WIG LORCH T 250 DC Basic Plus • Unit pendingin sirkulasi air LORCH WUK 7 (koneksi langsung LorchNET) • Obor las WIG termasuk paket selang • Kabel arde • Unit perawatan untuk gas / regulator tekanan Harga baru sekitar 6000 € _____ Sorotan: • Solusi satu kabel inovatif: Berkat koneksi unit pendingin modern, seluruh sistem (inverter + pendingin air) hanya membutuhkan satu kabel daya. Catu daya dan kontrol cerdas yang disesuaikan untuk WUK 7 dilakukan langsung melalui bagian belakang sumber daya las. Tidak ada kabel yang berantakan saat pemasangan! • Teknologi inverter kelas atas: Kapasitas las penuh 250 A dengan desain yang ringkas. • Fungsi FastPuls (hingga 2 kHz): Sempurna untuk pengelasan lembaran tipis tanpa distorsi. • Mobilitas yang kuat: Unit dasar yang sangat ringan (hanya 16 kg), ideal untuk penggunaan berat dalam pembuatan kendaraan, bengkel, serta pembuatan tangki dan pipa. _____ Data teknis: Iedpfx Aheyxvwiehjig • Rentang daya: 5 – 250 A • Siklus kerja (ED) pada 40°C: 60% = 200 A / 100% = 175 A • Tegangan jaringan: 400 V (sekring jaringan 16 A) • Kapasitas pendinginan (WUK 7): 0,53 kW • Berat: sekitar 16 kg • Dimensi inverter las Lorch T 250 DC: 483 x 185 x 325 mm (P x L x T) • Dimensi unit pendingin sirkulasi air Lorch WUK 7: 547 x 212 x 265 mm (P x L x T) _____ Perangkat ini dalam kondisi siap digunakan. Pemeriksaan dan uji coba dapat dilakukan setelah perjanjian.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] SUB OPERATIONS - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Required space: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3500 [kg] MACHINE HOURS - Operating hours: 80,490 [h] ACCESSORIES - Control: Fanuc - Driven tool motorisation at: S2, S3, S5, S6 - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extractor - Coolant reservoir Iijdpfx Ahouha Ugsheg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 Isdpfx Ahjzb Evleheig The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: bekas, Tahun pembuatan: 2011, Mesin Frais Quaser MV 184 Tahun 2011 Mesin ditawarkan lengkap, sesuai dengan yang terlihat pada gambar. Iodpjyfm T Hofx Ahhjig Termasuk catok hidrolik, unit agregat, konveyor serpihan, sistem filter sabuk, dan sistem ekstraksi.