Bor Mesin grinding

MOTOM BSM 13

Kondisi: baru, Drill bit sharpening machine Brand: MOTOM Model: BSM 13 DUO Grinding range: 2–13 mm Paint finish: grey Areas of application: • Grinding of conical surfaces • Point thinning • Relief grinding (backing off) Scope of delivery: • CBN grinding wheel for HSS tools • Collet set 2–13 mm in 1.0 mm increments • Plexiglas safety shield Bsdpfoguadnsx Aa Tjwi

Kondisi: bekas, en-001 Bwedpfx Aaovadd Ie Tji

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm Bwedpsph Uk Nsfx Aa Tji - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, CNC flame cutting system BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Bwodsf Ncadopfx Aa Toi Track length: 8000 mm Track gauge: 3345 mm Track height: 650 mm 2x machine cutting torches with burn table

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Bwjdpfxed Dhw Ns Aa Tsi Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) multimode, 16 W single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° Bsdswtppzopfx Aa Tswi BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: bekas, nomor mesin/kendaraan: 453, berat kosong: 4.500 kg, berat muatan maksimum: 13.500 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 02/2001, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 880 mm, volume ruang muat: 11 m³, suspensi: udara, ukuran ban: 385/65 r 22,5, jarak roda: 1.310 mm, Perlengkapan: ABS,

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Bwedpfxoqakbre Aa Toi Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm Bwjdsmxkdpjpfx Aa Tji - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 – 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Bwedpfsmk Iktjx Aa Tsi Additional available options, e.g.: additional idler units, foot switch