Bohrerschleifmaschine

MOTOM BSM 34

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units Fsdpfewtppzjx Aagjfw BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: bekas, Tahun pembuatan: 2007, panjang kontainer: 40 kaki, warna: abu-abu muda, berat keseluruhan: 30.480 kg, berat kosong: 3.745 kg, volume ruang muat: 67,7 m³, lebar ruang muat: 2.352 mm, panjang ruang muatan: 12.032 mm, tinggi ruang muatan: 2.390 mm,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic transmission - Automatic clamping on X, Y, and Z axes - Central automatic lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working Area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main Drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse - Power: 3.7 / 4.4 kW - Spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed Drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Fjdswhk Ubspfx Aagefw Table Slide: - T-slots quantity: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (with safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) Fedped Hy Elsfx Aagofw and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Kondisi: baru, de-001 Fodpfod Eqqqjx Aagefw

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Set of Rapid Steam Generators - Jumag Comprising 3 rapid steam generators including water softening unit and chemical dosing system Ffedswn H Aujpfx Aagjw 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year of manufacture: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year of manufacture: 2002

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 330 mm, lubang spindel: 78 mm, diameter pembubutan di atas alas geser: 520 mm, tinggi pusat: 260 mm, panjang pembubutan: 1.500 mm, gores kuas bulu: 127 mm, diameter quill: 68 mm, panjang total: 2.670 mm, lebar total: 810 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 20 rpm, lebar tempat tidur: 300 mm, berat keseluruhan: 2.135 kg, penjepit rumah spindel: MK 4, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose in accordance with DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) for the tool and cross slides - Manual central lubrication with one pump for longitudinal and cross slides - Complete coolant system with rear splash guard and carriage splash guard - Chuck guard - Control rod with three adjustable cams - Machine lamp Ffodpfx Asctutmoagew - Fixed centre - Set of machine leveling pads

Kondisi: baru, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Table dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Max. distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tilting ----- Left / Right 90 Degrees Longitudinal table travel ----- 560 mm Cross table travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * Drill chuck with arbor ISO30 - B16 Ffodpfx Asga T Ansagsw * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * Milling holder ISO30 + 12 collets in case * Milling cutter set

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Knives for Weima, Gross ... Suitable for almost all common chippers/shredders Available from stock in Bitburg Ffsdpobxu Dhjfx Aagew Subject to prior sale

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich. Fsdpeqhkukefx Aagefw