Beli Fronius Transsteel 5000 bekas (36)

Kondisi: seperti baru (mesin pameran), EN-FRONIUS-TPS-5000-2024-07-04 Codpfx Akjwbknbeaegu

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! Cjdpfx Aswbil Sekajgu ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Kondisi: seperti baru (mesin pameran), JUNE OFFER: 10% OFF ALL WELDING EQUIPMENT THROUGHOUT JUNE We offer welding machines in a variety of configurations and always have several sets in stock. CMT / ROBOTIC / CMT Torch Packages, UNIVERSAL or HOLLOW SHAFT robot-compatible options. Everything in stock and available for immediate delivery! Don't hesitate—request your individual configuration today! We also have a large selection of spare parts in stock at discounts of 30%, 50%, and even 70%. Simply send a short email, call, or WhatsApp message. CMT UNITS AT ONE-THIRD THE NEW PRICE! - 66% OFF ALL UNITS CAN BE VIEWED IN VIENNA AND PURCHASED WITHOUT WAITING TIME! Prices listed are starting from ... Euros. Prices and offers are tailored individually based on the required equipment configuration. Included components: - Fronius Power Source (TPS 4000 CMT) - Fronius Cooling Unit (FK 4000) - Fronius VR CMT Wire Feeder - Fronius Interconnecting Hose Package - Fronius Trolley - Fronius CMT Robotic Torch Package - Fronius RCU 5000i Sample photos of the items. Please see the many YouTube videos on the CMT topic! Also available via WhatsApp and Viber. Stock location: Vienna 1230 (Vienna) Shipping on pallet available at extra cost: Austria approx. €180 Germany approx. €230 Cgjdpfxjhzhyno Akaeu Europe on request All prices are base prices—custom configurations available. Robot or manual machine. Long or short connection hose package. Various hose packages selectable, including Synchropuls. 270, 400, or 500 amp units in stock. CMT versions available for manual or robotic use. Best to call us—we'll discuss your application and provide an initial pricing estimate.

Kondisi: baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 18220203, Automated Robotic Welding System Mains Voltage: 3 x 400 V Mains Voltage Tolerance: +/- 15% Mains Frequency: 50 / 60 Hz Main Fuse Protection: 35 A slow-blow Primary Continuous Current: 18 - 29.5 A at 100% duty cycle Primary Continuous Power: 13.1 kVA Power Factor: 0.99 Efficiency: 0.9 Welding Current Range: - MIG/MAG: 3-500 A - Rod Electrode: 10-500 A - TIG: 3-500 A Welding Current: - at 40% duty cycle: 500 A - at 60% duty cycle: 450 A - at 100% duty cycle: 360 A Welding Voltage Range: - MIG/MAG: 14.2 - 39.0 V - Rod Electrode: 20.4 - 40.0 V Codpeqpgntefx Akajgu - TIG: 10.1 - 30.0 V Maximum Welding Voltage: 49.2 V Open Circuit Voltage (OCV): 70 V Dimensions (H x W x D): 626 x 287 x 477 mm Weight: 35.6 kg Scope of delivery includes: - Power source on steel base (RS 422 interface) - Cooling unit (FK 4000-R) - Fronius VR 1500 4R/W/E robot wire feed case * Supply voltage: 55 V DC * Rated current: 4 A * Wire diameter: 0.8 - 1.6 mm (0.03 - 0.06 in.) * Wire feed speed: 0.5 - 22 m/min (19.69 - 866.14 in./min) * Torque: 4 Nm * Protection class: IP 21 * Dimensions (L x W x H): 405 x 208 x 205 mm (15.94 x 8.19 x 8.07 in.) * Weight: 7 kg (15.43 lbs) * 4-roller drive system * Maximum shielding gas pressure: 7 bar (101 psi) * Cooling fluid: Original Fronius coolant * Maximum coolant pressure: 6 bar (87 psi) - Welding torch: Robacta Drive W/E/6.25m - Hose package: 6.5 m - Various consumables (e.g., pipe bends, gas nozzle, contact tips) - Extraction unit with hose guide

Kondisi: seperti baru (mesin pameran), en Cgsdpfx Akovlwh Doaju

Kondisi: baik (bekas), Remote control for shielding gas welding unit, shielding gas device, welding rectifier, hand-held controller Csdogrlppspfx Akaegu - Manufacturer: Fronius, Remote Control RCU5000i .: 4,046,098 - Voltage: U1 24 V - Dimensions: 180/260/H50 mm - Weight: 1.5 kg

Kondisi: sangat baik (bekas), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Note: The price is for one welding machine only. Cgodpfx Aketkuyisaou

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Set untuk pengelasan plasma robotik. (Robot tidak termasuk – tanpa robot) Pengiriman ke negara-negara Uni Eropa menjadi tanggung jawab kami dan biaya pengiriman gratis. Cedpfx Aerfuc Hskasgu

Kondisi: bekas, Tahun pembuatan: 2019, 1765467873 Cgjdpfx Asu Nwhijkasu

Kondisi: baik (bekas), Shielding gas welding machine with pulse function, pulse arc welding system, MIG/MAG pulse welding system - includes: 3 torch packages (1x aluminium, 1x stainless steel, 1x steel) - maximum welding current: 330 A - features: remote control connection, detachable wire feeder, including earth cable, gas regulator Csdpfxsd I U Dwj Akajgu - wire feed: 4-roll drive - cooling: water-cooled - dimensions: 655/900/H1490 mm - weight: 160 kg

Kondisi: seperti baru (mesin pameran), Fronius TPS 2700 Puls Unit – Ready to Weld Scope of delivery: ➤ Fronius TPS 2700 Power Source (270A TRANS PULS SYNERGIC) ➤ Fronius torch package with display on the torch (arc, amperage, job selection etc. adjustable directly on the torch) ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ Gas hose ➤ 15kg spool adapter ►►► Perfect for mobile use Cjdovl D Idopfx Akajgu This unit is ideal for fast, mobile applications. Quickly loaded into a vehicle and easy to transport anywhere—with no compromise in welding quality. Of course, it is also suitable for stationary use. Frequently asked questions: ----- How old is the machine? Our customers typically phase out their equipment after 3-5 years—sometimes a bit more or less. What is the condition, and does the unit work flawlessly? Yes! Everything works as it should! All units are disassembled, cleaned, worn parts replaced, reassembled and tested by us. The units are clean; we do not sell equipment that is in poor condition! Excellent condition, with only minimal signs of use. All photos are original pictures of our own equipment (sample images). We do not sell units with burnt displays. Can I negotiate the price with you? If you purchase multiple units, we are open to discussing the price. Is shipping possible? Yes, shipping is possible. The unit will be securely packed on a pallet and shipped insured via our forwarding agent. Can I view the machines anywhere? We operate as an online retailer, but you are welcome to collect a unit in person and it can, of course, be tested before payment. We do not have regular opening hours—everything works by appointment only. All machines are configured according to customer requirements and delivered after payment. This is our standard procedure. Do you offer any warranty? No, we do not offer a warranty. We sell nearly-new, affordable professional welding equipment, usually for 1/4 to 1/2 the price of new. For the price difference compared to a new machine, you could buy two more units from us, or use the savings to service one or more machines for years to come. For example, the Fronius TPS 2700 offered here costs approx. €8,500 new. We offer it for less than 1/3 of the new price. All prices are base prices—you can configure the units as needed. Robot or manual version. Long or short connection hose package. Various torch packages available. Synchropuls. 270, 400, or 500 Amp units in stock. CMT version available for manual or robotic use. Best to call us—we’ll discuss your application and give you an initial price estimate.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, FRONIUS TPS 4000 ROBOTER SET - Fronius power source (TPS 4000) - Fronius cooling unit (FK 4000) - Fronius wire feeder - Fronius intermediate hose package - Fronius carriage - Fronius hose package - Fronius RCU 5000i - Interface = INTERBUS RUGGED LINE (Optional available: Profibus + €800 or DeviceNet + €1,400, further interfaces available on request) Manufacturer's list price: approx. €14,000 net Our price: €5,990 net – VAT deductible – invoice issued by dealer. Cjdpfewbi E Sex Akaegu We always have several units in stock in various configurations. We are happy to respond to your enquiries. All listed prices are starting from ... Euro. Prices/offers are calculated individually based on the device configuration. Sample pictures of the units. In stock in Vienna 1230 Shipping on pallet available at extra charge: Austria approx. €180 Germany approx. €210 Europe on request.

Kondisi: bekas, MIG / MAG Pulse Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Article No.: 4.075 Serial No. Year of Manufacture: approx. 2000 Output: 330 Amp. = 50% duty cycle 300 Amp. = 60% duty cycle 210 Amp. = 100% duty cycle Adjustment range: stepless Open circuit voltage: approx. 50 Volts Open circuit voltage: approx. 30 Volts Power supply: 400 Volts, 50 Hz, 32 Amp plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (programmed and manual operation) 2-stroke, 4-stroke, special 4-stroke, and spot welding - Welding controller with program memory and disk drive for external program storage - Separate 4-roll wire feed unit FRONIUS Type VR 152 with connection hose pack approx. 1.5 meters Cjdpfx Aeyv H Elokasgu - 4-meter hose pack BINZEL with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Machine fitted with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Kondisi: hampir baru (bekas), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R Cjdpjpa N Aasfx Akasgu - FK4000-RFC cooling unit (4,045,837,632), water-cooled - RCU5000i Remote Control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000) - CMT rotary encoder (43,0001,1219) with kPL Robacta robotic hose package - Interbus Rugged Line interface (4,045,885) (alternatively, Profibus and Profinet connections available)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, lebar total: 3.500 mm, panjang produk (maks.): 5.000 mm, jumlah sumbu: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilt axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional Equipment: • Robot control and teach pendant • Bumper (remote protection) and protective film for the teach pendant • Multifunctional flange for magnetic mounting on the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – component search using welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • operate: quick start buttons (Start / Stop / Reset / Emergency stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for universal robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilt axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm bore pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barrier (safety PLC for 2-station operation) Cjdpfxex D E Hus Akaogu Machine Benefits Technical Advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder including integrated freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools and 3 cabinets shown in the images are included in the scope of delivery. Additional Information Machine still powered on.

Kondisi: bekas, MIG / MAG pulse-controlled shielding gas welding machine FRONIUS Type TransPulsSynergic - TPS 330 Item no.: 4.075 Serial no.: Year of manufacture: approx. 2000 Performance 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Stepless adjustment range Open-circuit voltage approx. 50 volts Open-circuit voltage approx. 30 volts Power connection 400 volt, 50 Hz, 32 amp plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (programmed and manual mode) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feeder FRONIUS Type VR 152 with connection hose package approx. 1.5 meters - 4 meter hose package NEW, with central FRONIUS connector - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator NEW - Machine loaded with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Csdpfxjyxy Tbe Akajgu Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Machine is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding not included in the scope of delivery.

Kondisi: seperti baru (mesin pameran),

Kondisi: bekas, 1 unit mesin las bekas Merek: Fronius Tipe: Synergic 3400 G/W/E Untuk pengelasan baja, stainless steel, dan aluminium dengan proses MIG/MAG. Data teknis: Arus las maksimum: 340 A Diameter kawat yang dapat digunakan: 0,8/1,0/1,2 mm Tegangan sambungan: 380 Volt Siklus kerja (ED) 35% pada 340 A Tampilan digital Csdpfx Ajyl Id Tjkasgu Dimensi (P x L x T): 890 x 460 x 945 mm Berat total: 139 kg

Kondisi: bekas, fronius-tps450-en Cgedpfoyn Ii Ijx Akaou

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 23423676, Perlengkapan: Pelat tipe tersedia, Mesin las Fronius VarioSynergic 3400 G/W/E Cgsdsym Rq Sspfx Akaju Tersedia 6 unit, harga per unit. Dalam kondisi kerja. Data dapat dilihat pada plat nama. Pembelian hanya diperbolehkan untuk entitas hukum.

Kondisi: bekas, Blower filter unit, welding fume filter, welding fume extraction, respiratory protection device - Filter Cjdpfjd Duvbox Akaegu - in carrying case - without battery - Dimensions: 420/165/H335 mm - Weight: 3.2 kg

Kondisi: bekas, MIG/MAG torch package, MIG/MAG welding torch, MIG/MAG Multilock gooseneck, torch body -Manufacturer: Fronius, MIG/MAG Multilock Gooseneck, original packaging -Type: ML AL3000/AW4000 45 L148 Cgsdpfxoii Sffo Akaju -Quantity: 2 torch bodies available -Price: per unit -Box dimensions: 325/125/H75 mm -Weight: 0.4 kg/unit

Kondisi: bekas, MIG/MAG hose package, MIG/MAG welding torch, MIG/MAG Multilock torch neck, torch body -Manufacturer: Fronius, MIG/MAG Multilock torch neck, original packaging -Type: ML AL3000/AW4000 45 L157 Csdpfx Aksii Sfxsaegu -Quantity: 2 torch bodies available -Price: per piece -Carton dimensions: 325/125/H75 mm -Weight: 0.4 kg/unit.

Kondisi: seperti baru (mesin pameran), Fronius TPS 3200 ✅ Scope of supply: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC water cooler – Standard with Flow Control, Thermocontrol, and coolant filter. The cooler shuts off if the water cooling fails or overheats to protect the torch package. These features usually cost around €400 extra from Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical; in our opinion, the most sensible feed unit – the wire is securely stored in the closed case. ➤ Fronius intermediate hose package, long – Each set is supplied with a 5-meter connection hose between the power source and wire feed unit, granting more flexibility and better handling. Take the wire feeder unit to locations that are more difficult to reach! The hose package is tidily stored on a hook on the machine's side (Hooks produced by us). ➤ Fronius large trolley – Probably the best trolley on the market, including a gas cylinder holder. ➤ Binzel torch hose package – With up/down amperage control on the torch. ➤ Ground cable 3-4m Dobkh Hjum Rw Dsufpokk ➤ Brand new Messer pressure regulator ➤ Brand new basket spool adapter for large wire spools With this system, almost any material can be welded, including aluminum, steel, and stainless (V2A). It features pulsed wire programs and is also suitable for MIG brazing (CuSi), widely used in the sheet metal sector. Additional options available at extra charge, e.g. Fronius Job Master torch hose package (display on the torch) + €500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE INCLUDED Viewing possible in Vienna, Austria, 1230! ✔ Fully insured pallet shipping available! ✔ We can also be reached via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ Cgodpfx Ajwbilxjkasu ►►►What condition are the devices in? To clarify: we purchase nearly-new used devices, fully dismantle and check them, replace worn parts as needed, and only after a successful test weld do they get released for sale. "All" devices are clean, with no burn holes in the displays and without multiple burn marks or dents across the device! You’re purchasing an item in excellent presentable condition, not something worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID number and qualify for intra-community delivery within the EU, we can issue a net invoice. ►►►Which payment methods are available? Advance payment or cash upon personal collection. ►►►Why buy from us? We are professionals specializing in this Fronius welding equipment series and keep 60-80 machines in stock at all times – exclusively Fronius, no other brands! We fully understand these devices and would never sell something we don’t know.

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net incl. BINZEL TORCH PACKAGE UP/DOWN, or Fronius AW torch package with display on the torch incl. connector conversion (+€500) ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol and coolant filter. The cooling unit switches off if water cooling fails or overheats, protecting the torch package. These features cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion the most sensible wire feed case – the wire is safely stored in a closed case. ➤ Fronius intermediate torch package, long – Every unit comes with a 5m intermediate hose package between power source and wire feed case for more flexibility and better handling. Take the wire feed case off the main unit to reach complicated spots! The connection hose is neatly stored on a hook attached to the side (we manufacture these hooks ourselves). ➤ Fronius large trolley – Arguably the best carriage with gas bottle holder on the market. ➤ Torch package from Binzel – With up/down regulation for adjusting amperage on the torch. ➤ Ground cable 3-4m ➤ Brand new Messer pressure regulator ➤ Brand new reel adapter for large wire coils With this unit, you can weld almost all materials including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is suitable for MIG brazing (CuSi), frequently used in the sheet metal sector. Further options available at extra cost: e.g. Fronius Job Master torch package (display on torch) + €450.00 First 10 buyers will receive an additional second torch package free of charge. Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Cedpfx Akowbillsajgu Debsum Rw Dokh Hufpokk (presumably a code or stock number) IMMEDIATELY AVAILABLE PROPER INVOICE ISSUED Viewing possible in 1230 Vienna, Austria! ✔ Insured shipping on pallet is no problem! ✔ We are also reachable via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅Questions✅ ►►►What is the condition of the units? For clarification: we buy as-new used machines, disassemble them, check everything, replace wear parts if necessary, and only release for sale after a successful test weld. "All" units are clean, with no burn marks on the displays and no burn holes or dents scattered around the body! You are buying a machine that is also ⭐visually presentable and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid EU VAT ID and meet the conditions for intra-community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection. ►►►Why buy from us? We are specialists for this Fronius welder series and always keep 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these machines inside out and only sell products we truly understand.