Beli Las Tig bekas (9.374)

Kondisi: bekas, Machine weight approx. 110 kg Required space approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding units, which has already proven itself thousands of times, is now being expanded with a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also enables, in this case, the integration of the respective benefits into innovative welding equipment. Bdsdpfxowf Rg Sj Ad Rsa --> Technical Data Power supply: 3/PE AC 400 V Maximum primary power: 14 kVA Supply fuse: T 16 A Adjustment range: 5 - 300 A Stick electrodes: Ø 1.5 - 5 mm Protection class: IP 23 Water cooling unit for the welding torch: built-in

Kondisi: bekas, Tahun pembuatan: 2007, en-001 Bdedpewf Rgrofx Ad Roa

Kondisi: bekas, Tahun pembuatan: 2007, The approximate machine weight is 290 kg. Required space: approx. 1050 x 560 x 840 mm. The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process results in higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the heat-affected zones, and, where applicable, omission of filler materials). Technical specifications: - Welding current type: DC - Mains voltage (50/60 Hz): 400 V - Phases: 3 - Adjustment range: 10 - 320 A Bdjdpfx Aowf Rg Eod Roa - Adjustment range electrode: 25 - 280 A - Welding voltage: 22 V - Open circuit voltage without HF: 70 V - Open circuit voltage with HF: 90 V - Primary power: 23 kVA - Duty cycle at 60%: 320 A - Duty cycle at 100%: 260 A - Cooling type: F - Protection class: IP 23

Kondisi: bekas, Tahun pembuatan: 2007, Approximate machine weight: 290 kg Space required: approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) as well as for both direct and alternating current welding (AC/DC version), based on an innovative arc forming process developed by Hermann GmbH. In practical use, the SHARC process delivers higher welding speeds while simultaneously improving seam quality and reducing welding ancillary costs (such as less distortion, improved penetration, minimized discoloration of the workpiece, reduced hardening of the transition zones, and, if needed, dispensing with filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Bdsdpfxswf Rgxo Ad Rja Protection class: IP 23

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Duty cycle at 60/100%: 320/260 A Bdedjwx H Aijpfx Ad Rsa Electrical connection, mains voltage: 400 V Weight: 290 kg Space requirement: 1200 x 600 x 950 mm

Kondisi: siap digunakan (bekas), Welding current at 25% duty cycle max.: 250 A Welding current at 100% duty cycle: 110 A Welding current infinitely adjustable: 5 - 250 A Bdsdjwvggpepfx Ad Rja Electrical connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Kondisi: bekas, Welding current at 25% duty cycle max.: 250 A Welding current at 100% duty cycle: 110 A Welding current, steplessly adjustable: 5 - 250 A Electrical connection: 380 V Bdodpfx Aowvgg Ned Roa Space requirement: 650 x 600 x 1100/1500 mm (height) Weight: 55 kg

Kondisi: baik (bekas), Water-cooled TIG welding machine Kjellberg KU 262 Bdedpfx Adjg Tvvro Rja Technical data: see photos Operating manual available

Kondisi: bekas, TIG welding machine, electric welder KESTRA Type WIG 350 AC/DC Stick welding machine Serial No.: Year of manufacture: approx. 1985 Output: 350 A at 60% duty cycle Adjustment range: 3 steps plus fine adjustment Current type: AC / DC Power supply: 400 Volt, 50 Hz, 32 A plug - 4 meter hose package with TIG torch - 2-stroke / 4-stroke welding function Bdsdpfx Asdzql Sjd Rea - Water-cooled - Gas pressure regulator Space requirements (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with direct current, and good results when welding aluminium with alternating current. The HF ignition is non-functional; the arc can be started via a brief contact.

Kondisi: bekas, TIG welding machine, electric welding unit DALEX type TGKW 55 (AC-DC) Serial no. 532521 Year of construction: approx. 1975 Output: 225 amps = 60% duty cycle 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Current type: Direct current and alternating current (AC-DC) Power connection: 380 volt, 50 Hz - Output adjustment via 5 coarse steps and stepless fine adjustment with rotary potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - TIG torch package, 4 meters - Welding gas pressure regulator - Water-cooled Bdsdpfx Adodzqacj Rea Required space (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg In good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tinggi total: 755 mm, lebar total: 400 mm, panjang total: 880 mm, tegangan masuk: 400 V, panjang kabel grounding: 4.000 mm, berat keseluruhan: 60 kg, jenis pendinginan: air, panjang paket selang: 4.000 mm, sekring listrik: 16 A, tegangan rangkaian terbuka: 87 V, arus pengelasan pada siklus kerja 60%: 200 A, arus pengelasan pada siklus tugas 100%: 170 A, arus masuk: 16 A, jenis perlindungan (kode IP): IP23, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 300 A, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Demo unit, year of manufacture 2024 Including TIG torch i-LTW 3000-PM, 4 m. TIG Welding Welding range 3~ 400 V [A]: 5 - 300 Voltage range [V]: 10.2 - 20 Bedeyrttyepfx Ad Rjda TIG Duty cycle AC, 400 V Duty cycle AC 100% (40°C) [A]: 200 Duty cycle AC 60% (40°C) [A]: 230 Duty cycle AC at max. welding current (40°C) [%]: 30 TIG Duty cycle DC, 400 V Duty cycle DC 100% (40°C) [A]: 230 Duty cycle DC 60% (40°C) [A]: 270 Duty cycle DC at max. welding current (40°C) [%]: 45 Manual electrode welding Welding range 400 V [A]: 10 - 200 Voltage range [V]: 20.4 - 28 Weldable electrodes [Ø in mm]: 1.5 - 5 Electrode Duty cycle Duty cycle 100% (40°C) [A]: 170 Duty cycle 60% [A]: 200 Duty cycle at max. welding current (40°C) [%]: 60 General technical data Open circuit voltage [V]: 77 - 87 Mains 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 16 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug Mains plug: CEE 16 Standards and approvals Protection class: IP23S Insulation class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.14 Tank capacity [l]: 3.4 Dimensions (L x W x H) Dimensions (LxWxH) [mm]: 880 × 400 × 755 Weights Weight [kg]: 60

Kondisi: baik (bekas), MERKLE Insquare W 300 AC/DC Welding Machine with original hose package Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz Power factor (cos phi): 0.95 TIG DC Range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Bjdpfxel Sm Hbs Ad Rsda Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A MMA Welding Mode: Stick electrodes: 1.5-6 mm Open-circuit voltage: 80 V Operating voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (at 40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: 10-step selector switch: TIG DC negative, TIG DC positive TIG DC neg. with start pulse TIG AC low-noise TIG AC rectangular TIG AC “Balanced TIG” Electrode negative Electrode positive Electrode “sine” Electrode rectangular Selector switch 1: 10-step switch: Current 1, Time 1 Up/down slope Start current, end current Ignition pulse, spot time Pre- and post-gas flow time Selector switch 2: 9-step switch: Current 2, Time 2 (for pulsed operation) AC balance, AC frequency Hot start time and current Current control Electrode diameter, voltage display Settings: 2 rotary encoders for selectors 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-position switch: OFF, slow pulse, fast pulse, spot welding Ignition: 4-position switch: OFF, high frequency, Lift-TIG Energy control: 4-position switch: on unit, hand or foot remote control, welding torch Operation modes: 4-position switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, gas test, test, program Program memory: 20 freely assignable memory slots AC frequency: 50-200 Hz AC balance: 9-91% Pre-gas time: 0-3 s Post-gas time: 0-25 s Current up-slope: 0-2 s Current down-slope: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current moderation: 100-250% Button: Protective test function Button: Program selection LED: Power ON, overheating, fault, protective circuit, display hold, start current, ramp-up, current 1, current 2, ramp-down, end current Power source: IGBT inverter Ignition: High-frequency or Lift-TIG Standard: EN 60974-1 “S” / CE Torch connection: EURO central connector with 5-pin plug Torch cooling: recirculating water cooler Socket 50 mm²: Workpiece cable Socket 50 mm²: MMA cable Power supply: 4 x 4 mm² cable, 5 m long Gas hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions (L x W x H): 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: for 10, 20, or 50 l bottles Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles – new and used – can be found in our shop! International shipping costs on request!

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Both a Rehm Invertig Pro 350 AC/DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3-350A Output voltage U₂ (at max current): approx. 24V No-load voltage U₀: approx. 91V Duty cycle: 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S Bedsxddamopfx Ad Reda Insulation class: S Adjustment range: 3-350A in TIG for this AC/DC version Duty cycle: 100% at 40°C, 350A in TIG, 100% duty cycle Input fuse: 32A at 3x400V for 350 AC/DC version Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: 29.5kg for the AC/DC version 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3-450A Output voltage U₂ at max current: approx. 28V No-load voltage U₀: approx. 91V Duty cycle: 100% at 450A TIG; lower for electrode welding (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100%: 450A (TIG) at 40°C Electrode welding (MMA) current: approx. 360A at 100% duty cycle for electrode operation on the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: approx. 28kg On-site inspection is possible.

Kondisi: seperti baru (mesin pameran), 1 Bjdpfx Adsyhpmhj Rjda

Kondisi: baik (bekas), We are selling a TIG welding machine ESS TIGARC 300. Bjdpfx Asu Sr Uped Rjda

Kondisi: bekas, TIG welding machine, welding machine, TIG welder -TIG welding machine with direct current (DC) Bsdpfsd Nrpcjx Ad Rjda -Max. welding output: 400 A -Water-cooled -Includes ground cable -Gas regulator -Dimensions: 610/1140/H930 mm -Weight: 310 kg

Kondisi: bekas, TIG welding machine, inverter welding machine, TIG welder, inverter welder Bdedefwg H Hepfx Ad Rsa - Manufacturer: Ess, TIG and manual electrode welding machine, water-cooled - Model: THYROARC 3 AC/DC, direct/alternating current - Incl.: Ground cable, gas regulator, hose package 7500 mm long - Welding output: max. 280 A, see nameplate - Dimensions: 1300/570/H900 mm - Weight: 262 kg

Kondisi: bekas, TIG welding machine, welding unit, TIG welder Bdsdpfsffukwjx Ad Roa - TIG welding machine: AC (alternating current) - Torch package: 1 - Supplied with accessories: gas nozzles, tungsten electrodes, mixing nozzles, ceramic nozzle cups, etc. - Max. welding current: 220 A - Air-cooled - Incl. ground cable - Gas regulator - Dimensions: 870 x 455 x H665 mm - Weight: 112 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, TIG welding machine, inverter welding machine, TIG welding unit, inverter welding unit - Manufacturer: Merkle, water-cooled TIG welding machine with transport cart - Model: TIG 240 DC - Welding current: max. 240 A - Cooling: Merkle WK 230 water recirculation cooling unit Bdedpfx Asqw D Eisd Roa - Accessories: incl. ground cable, hose package (see photos) - Dimensions: 970/560/H1085 mm - Total weight: 99 kg

Kondisi: bekas, TIG welding rod, welding wire Bodpfxjcbdyzj Ad Rjda Universally applicable TIG welding rod for root and joint welding on non-alloyed and low-alloyed steels, general structural steels, fine-grained structural steels, and pressure vessel steels, suitability tested down to -40°C. -net weight: 5 kg -Quantity: 7 packages available -Price: per package -Total weight: 5.3 kg/package

Kondisi: baik (bekas), TIG welding machine, inverter welder, TIG welder, inverter welding machine Bdedpfsqwprnex Ad Rja - Manufacturer: Jäckle, water-cooled TIG welding machine - Model: WIG 301i DC - Welding output: max. 300 A, see nameplate - Cooling unit: KG 2 - Accessories: incl. ground cable, hose package - Dimensions: 730/620/H1180 mm - Weight: 73 kg

Kondisi: baru, Current 200 A Duty cycle at 100% 150 A Mains voltage 230 V Machine weight approx. 9.0 t Space requirement approx. 0.46 x 0.15 x 0.32 m TIG welding machine - new - 3 m hose package - additional 8 m hose package - ground cable Bdsdswrzrxepfx Ad Rea - gas connection hose - documentation

Kondisi: baik (bekas), TIG welding machine, welding machine, TIG welder -TIG welding machine AC/DC (direct/alternating current) -Torch packages: 3 Bdedpfsd Naw Isx Ad Rea -Max. welding output: 225 A -Air cooled -Includes ground cable -Gas regulator -Dimensions: 610/1270/H860 mm -Weight: 288 kg

Kondisi: baik (bekas), TIG welding machine, inverter welding machine, TIG welder, inverter welder Bjdpfxedzwwno Ad Roda -without torch package -maximum welding current: 250 A -air cooled -including earth cable -gas regulator -dimensions: 370/720/H870 mm -weight: 52 kg

Kondisi: baik (bekas), Tahun pembuatan: 1980, TIG welding machine Messer Griesheim GW 200, AC/DC, 400 volts Bedpfx Adotd Hhde Rsda