Beli Veab bekas (184)

Kondisi: bekas, Tahun pembuatan: 1978, used Manufacturer Wemhöner Type W 85 Year of manufacture 1978 No. 29 Dimensions (L x W x H) approx. 2100 x 1200 x 860 mm Height adjustable via threaded spindles Carriage laterally movable Infinitely adjustable Roller spacing approx. 150 mm Stop on the left Location: 97447 Gerolzhofen Delivery as is Prjdsvwfafepfx Ab Isd

Kondisi: baru, Tahun pembuatan: 2024, Product Innovation: Sawing System Type "ORIX" The sawing system enables fully automatic processing of a wide range of aluminium profiles. The machine is constructed on a robust base frame. For positioning of the sawing unit, linear guideways and precision carriages are used. The drives are equipped with servo motors. For cutting operations, the sawing unit advances 300 mm along the Y-axis, easily cutting special profiles, plates, or Item and Bosch profiles. The support table comprises movable rollers that position themselves according to the cutting length. All rollers are also mounted on precision linear guides. Additionally, the saw features a sturdy outfeed table for collecting the cut aluminium parts. (Optionally, cut parts can be discharged directly via a conveyor belt, including the removal of chips.) The system is available with a cutting length of 6,000 mm, resulting in an overall length of 7,000 mm. Delivery includes a suitable 2-channel minimum-quantity lubrication system. The unit will also be supplied with a 400 mm or 600 mm saw blade, as required. Prjdpfsfu Tgrjx Ab Ied Your advantages: • Virtually no scratching, as the material is not pushed over a cast table • Improved chip disposal (no extraction system required) • Extremely compact footprint 4,000 mm / 7,000 mm • Smaller remnant (50 mm minimum remnant length) • Safe operation (light curtain safety system) • Simple material disposal (conveyor belt or brush-outfitted table) • No resetting required, unlike conventional saw automats • No dimensional deviations • Interchangeable rollers that securely accommodate any special profile shape, ensuring clean and precise cuts Working process Enter the profile length into the control system. The saw unit then moves to the preset position. The operator loads the aluminium profile and starts the saw. A head-cut detection sensor identifies the correct position for the head cut. The initial cut is made, after which the saw head retracts and repositions itself at the next entered coordinate, and the process is repeated. These steps are repeated until the entire profile is cut. All cut parts are gently deposited either on the outfeed table or on the conveyor belt. Material clamping is performed—as with conventional aluminium saws—using vertical and horizontal clamps directly at the saw unit. Once the profile is cut, the saw head automatically returns to the loading position, ready for another cycle. Optional cross conveyors for automated infeed can be provided. Safety features such as fencing or a light curtain can also be integrated. The control system is available in two versions: 1) Diethei control system, 2) Siemens control system. Optional material sorting into different bins or by length is also available. You are welcome to visit our production/demo facilities at any time to view the machine. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: diremajakan ulang (bekas), 50 m³ / 50,000 l Firefighting Water Tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel grade S 235 JRG 2 Underground tank for subterranean storage, available in single or double-walled variants, suitable for pedestrian and vehicle-bearing areas (load class SLW 30), equipped with 1 dome (outer diameter 720 mm) with blank cover, gasket, and bolts. Available immediately, new or used! The tank is emptied, cleaned, completely overhauled, and professionally tested for tightness by our certified workshop. The tank complies with DIN 14230 specifications (underground firefighting water tank): - Firefighting water suction connection according to DIN 14244, including mounted Storz coupling / fixed coupling type A according to DIN 14319, version B, without dipstick - Ventilation flange connection in NWN 100, including cap, with a total length of approx. 1,300 mm (suitable for 800 mm cover depth and 500 mm above ground level) - Exterior protected with bitumen coating - On request, the tank can be supplied with a full internal lining based on bitumen or epoxy resin (for corrosion protection) - It is also possible to line the interior with a plastic liner Cost-effective delivery with our own truck available – simply inform us of the delivery location for an immediate, exact freight quote. Inspection is possible at any time by prior arrangement. We accept trades and buy tanks/containers of all kinds – simply contact us for more details. Prsdpfx Ajhh Sprob Ijd These tanks are also available from stock in the following capacities: 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Pressing force: 800 kN Stroke rate: 30 - 200 strokes/min, adjustable via PIV gearbox Stroke, adjustable: 20 - 100 mm Shut height: 500 mm (at largest stroke, slide up) Ram bolster: 75 mm Table area: 1,010 x 800 mm Pass-through opening: 700 x 150 mm Ram area: 860 x 700 mm Drive power: 22 kW Features: - 2 connecting rods - 8-point ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Electropneumatic stroke adjustment Including complete coil line, make ALBA, consisting of: Decoiler Maximum outside diameter: 1,400 mm equipped with: • Powered decoiler carriage • Hydraulic loading saddle • Hydraulic auxiliary drive Prodpfxodhzf Ij Ab Iod • Hydraulic coil expansion 480 - 530 mm • Hydraulic traversing unit • Hydraulic pressure roller, side adjustment via handwheel • Strip edge guide arms Straightening machine Type: Ma Ria 9 Strip width: max. 400 mm Strip thickness: 0.5 - 5.0 mm Number of feed rollers: 2 pcs, Ø 120 mm, upper hydraulically openable Number of straightening rollers: 9 pcs, Ø 60 mm, top rollers individually hydraulically adjustable, readings via micrometer, all rollers supported equipped with: • Hydraulic strip infeed assist, table with tongue and hold-down roller • Lateral strip guide on infeed with asymmetric adjustment • Lateral strip guide at outfeed • Outfeed roller basket • Loop control via sensors • Lateral loop guiding Roll Feed Type: Vhy 400 Strip width: max. 400 mm Strip thickness: max. 5.0 mm Height adjustment via hydraulic jack Press or coil line can also be offered separately.

Kondisi: baru, Tahun pembuatan: 2024, Pressure: 60 t Stroke: 400 mm Table size: 800 x 500 mm Downward speed: from 4.03 mm/sec Upward speed: 5.82 mm/sec Frame opening: 820 mm Max. oil pressure in working cylinder: 400 bar Oil capacity: 26 l Power supply: 400 V / 50 Hz Total power requirement: 3 kW Machine weight: approx. 0.55 t Space requirement: approx. 1.5 x 0.9 x 2.1 m Workshop press, manually and hydraulically operated Pressure cylinder can be moved horizontally, Prjdpfx Abjvcrmvo Isd Work table height adjustable by cylinder hydraulics, Cylinder diameter: 150 mm, piston base diameter: 85 mm,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, lebar kerja: 300 mm, tinggi penyerutan: 120 mm, diameter spindel: 50 mm, lebar perataan: 300 mm, tinggi kerja: 1.000 mm, lebar total: 2.800 mm, tinggi total: 2.400 mm, panjang total: 3.800 mm, berat keseluruhan: 13.000 kg, daya motor pengumpan: 24.000 W, kecepatan spindel (min.): 5.500 rpm, kecepatan rotasi (maks.): 6.000 rpm, kecepatan rotasi (min.): 5.500 rpm, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 205 mm, tinggi benda kerja (maks.): 120 mm, lebar benda kerja (maks.): 330 mm, tegangan masuk: 400 V, diameter alat: 205 mm, jumlah spindel: 5, daya: 154 kW (209,38 hp), lebar meja: 330 mm, Four-side moulder for lamellae 300 x 120 mm Feed speed adjustable from 30 to 150 m/min. Equipment: 2 horizontal cutter heads (top and bottom) Z 10 2 vertical cutter heads (right and left), Z 10 Equipped with jointers. - Spindle speed horizontal cutters: 5,500 rpm - Spindle speed vertical cutters: 6,000 rpm - Vertical spindle diameter: 50 mm - Clamping length vertical spindles: max. 185 mm Tool diameters: - Horizontal cutter heads: 205 mm - Vertical spindle cutter heads: 160 - 205 mm Cutter blocks: - Planer shaft and thicknessing shaft with cutter blocks: - 2 x Planer head 205 x 330 mm; Z=10, bolt clamping - Planer knives for lamellae 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm; Z=10, bolt clamping - Planer knives for lamellae 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Units Bottom Scoring Saw This unit is used for balancing groove machining on the lower edge of lamellae with a width over 200 mm. The saw blade is clamped with a flange directly onto a flat motor. Horizontal movement via pneumatic cylinder, scoring travel approx. 150 mm (movement between planks; activation by moveable spot detector). Area setup is manual; stroke is indicated by a counter. Vertical movement via pneumatic cylinder, scoring travel approx. 30 mm (enables quick adjustment during machining between lamellae with/without balancing grooves). End stop (groove depth) is set manually. Stroke is indicated by a counter. Lamellae must be fed individually into the machine (not pushed together). Technical data: - Scoring saw: 15 kW - Saw speed: 5,000 rpm - Arbor diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Suction hood connection diameter: 120 mm - Additional feed rollers: one above, Ø240 mm; one below, Ø240 mm, toothed and hard chromed. Saw blade is supplied with scoring saw. - Working range for scoring saw: from 37.5 up to 225 mm. Podpfx Abjwz Nzme Iord Motorised Infeed Side Pressure Roller Pneumatically suspended. Motorised lateral width adjustment via control buttons. (If the spindle positioning control is optioned, lateral pressure roller is set from the control panel.) The set width is displayed on SIKO counter. - Roller diameter: 190 mm - Roller height: 40 mm Automatic Jointer – Knife Equalising Device The cutter knife equalising device is fixed mounted. Activated manually.

Kondisi: baru, de Predpfxsn Nv S To Ab Ijd

Tahun pembuatan: 2007, Kondisi: baik (bekas), ■ V600-Bohrmaschine (fahrbarer Bohrschrank, ausgestattet mit 1 Horizontal-Bohraggregat und automatischem Werkzeugwechsler) ■ Bohrtisch mit Stromschiene, Länge 15 Meter, effektive Bearbeitungslänge 12 Meter ■ Hard- und Software (inklusive VACON 110 Maschinensteuerung) ■ Sicherheitseinrichtungen (Sicherheitsstoßfänger) Prjdpfxsq Hgg Ue Ab Ijd ■ Baujahr 2007

Kondisi: baru, Tahun pembuatan: 2024, Speed under load: 2.7 mm/sec Pressure: 100 t Stroke: 400 mm Table area: 920 x 560 mm Approach speed: 4.25 mm/sec Return speed: 8.22 mm/sec Max oil pressure (in working cylinder): 385 bar Oil capacity: 26 l Piston diameter: 125 mm Frame opening: 920 mm Voltage: 400 V / 50 Hz Podpfx Absvcrm Aj Isrd Total power requirement: 4 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.7 x 0.9 x 2.1 m Unused workshop press (demonstration machine) Manual and hydraulic operation Pressure cylinder movable horizontally Table height adjustable via hydraulic cylinder Cylinder diameter: 175 mm, piston base diameter: 125 mm,