Pusat pemesinan vertikal

MTRent MTCut V110-12TH

Kondisi: siap digunakan (bekas), X/Y/Z/U/V travel: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Hsdpeuqackefx Abhsnh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Hnjdpfx Asw Au H Robheh Connected load: 40 kW Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0–115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2–150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system including a new operator panel before sale. The dressing spindle for the grinding wheel is electrically operated via a servomotor. The machine will be completely overhauled, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed systems, workpiece rulers, etc.). Hedpouy Ifgofx Abhonh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.700 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (min.): 6.000 rpm, lebar meja: 1.100 mm, panjang meja: 4.200 mm, kecepatan rotasi (maks.): 6.000 rpm, Kontrol Heidenhain iTNC 530 Penukar alat untuk 60 alat Hodow Ngd Topfx Abhenh Kepala universal otomatis, 0,02 derajat pada kedua sumbu Mesin akan direkondisi pada tahun 2025

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 5.900 h, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Hodpfxowzyr Ae Abhenh Operating hours: 5,900 h Travel paths: X: 350 mm Y: 220 mm Z: 220 mm U: 350 mm V: 220 mm Year of manufacture: 2008

Kondisi: bekas, Tahun pembuatan: 2014, Workpiece length 100 mm Swing diameter 80 mm Number of spindles 2 Control FANUC 31i-B5 Workpiece weight 2.00 kg Hodpfovx Uvfox Abhsnh Center height 170 mm Grinding wheel diameter 100 mm Grinding wheel bore 32 mm Max. grinding wheel width 20 mm Max. circumferential speed 125 m/sec Steady rest passage 45 - 60 mm Total power requirement 75.00 kW Machine weight approx. 25.00 t Space requirements approx. 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam blanks. Equipped with FANUC 31i-B5 control for non-circular grinding; loading gantry; CO2 extinguishing system; for CBN grinding wheel; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock variant 12 (two grinding spindles movable independently)

Kondisi: bekas, Tahun pembuatan: 2014, en001 Hsdet Uw Avspfx Abhonh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, daya nominal (semu): 10 kVA, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 20.000 rpm, Heidenhain TNC530, pembagi sumbu ke-4 spindle 20.000 rpm, HSK 63 Hodpfsw Dc Irox Abhjnh meja 850x530 mm pergerakan 600x450x450 mm penukar alat 30 posisi berat 6.500 kg

Kondisi: bekas, Tahun pembuatan: 2007, en_0015 Hnsdpovy Ihdjfx Abheh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 2.350 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, The used 4-axis vertical machining center QUASER MV 184 C is a medium-sized CNC vertical center with a cast iron frame, equipped with roller guideways for the table movement; travels: X 1020 mm, Y 610 mm, Z 610 mm, table dimensions 1200×600 mm with a maximum load of 500 kg. It is complete with a full 4th axis TJR HR 255N including tailstock and milled table face with T-slots. Spindle type ISO-40 (DIN 69871) with 10,000 rpm (max 18 kW), cooled via dedicated chiller unit, high-pressure coolant through the spindle, RANDOM-type tool changer with 30 tool positions and swing arm, RENISHAW TS 27 tool presetting unit, wireless RENISHAW workpiece probe, and belted chip conveyor. Hsdjxf Nbrjpfx Abhjnh Year of construction: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i with remote handwheel, USB port, RS-232 serial, memory card slot, and FILTERMIST oil mist extractor. The machine is in PERFECT condition with only 2,350 cutting hours. Various additional tooling and accessories available.