5 Stasiun header

NATIONAL 245 WFC

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine Itedpfx Asvtpcioa Nsb - Lower roll forming machine (12 stands) - Roller conveyor - Operator’s entry desk 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Isdpfstunccsx Aa Nstb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Itedpfx Aajr D N Eqs Njb Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: bekas, CNC lathe with Y-axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T - Spindle nose: ASA 5 - Main spindle power: 15 kW - Self-centering diameter: 175 mm Isdpeqn E U Tofx Aa Notb - ASA 5 spindle connection - Bar capacity: 52 mm - Turning diameter: 230 mm - Turning length: 500 mm - Max. spindle speed: 5,000 rpm - Number of tool turrets: 1 - Number of tool stations on first turret: 12 - Number of driven tool stations on first turret: 12 - First turret tooling system: VDI 30 - X-axis travel: 160 mm - Y-axis travel: ±32 mm - Z-axis travel: 550 mm - Rapid traverse rate (X/Y/Z): 30 m/min - Sub-spindle: yes - Sub-spindle nose: ASA 5 - Max. sub-spindle speed: 5,000 rpm - Sub-spindle power: 9 kW - Sub-spindle bar capacity: 30 mm - Bar loader model and brand: LNS with single bar tube - Chip conveyor: belt type - Tool presetting: yes - Year: 2000 The machine is in our warehouse in Gussago (BS), under power. Mimu Machine Tools Italy

Kondisi: baik (bekas), Tahun pembuatan: 2004, Kommission Nr.: Lg 34522 High-Performance Automatic Punch Press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of manufacture: 2004 (without soundproof enclosure) Equipped with: - Infinitely variable drive - 2-connecting rod mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 display control - Oil circulation lubrication Technical Data Press force (max.): 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Upright clearance: 1,250 mm Table area: 1,250 x 730 mm Passage opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo Roll Feed VAMCO SP 150 year of manufacture: 2014 Passage width: max. 150 mm Iodpfx Aeip Uqmoa Notb Material thickness: max. 3.0 mm

Tahun pembuatan: 2024, Kondisi: baru, The LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough-hard, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many, many more!! Itjdpfx Aasga Nfco Nsb

Kondisi: sangat baik (bekas), Tahun produksi: 1991 Model: ITPS III Nomor seri: ITPS 80C 25 P1C226 Iodpfx Aaswq Dpqe Netb Gaya tekan maksimum: 1800 kN Langkah kerja: 115 mm Daya listrik: 415 V, 50 Hz, 3 fasa Arus nominal: 119 A Daya terpasang: 18,5 kW Berat mesin: 4940 kg Nomor inventaris: 9.14 Kontrol: Delem DA-65R Mesin dapat dinyalakan, namun kontrol tidak merespons perintah. Pengguna sebelumnya telah mengganti kontrol AMADA asli dengan DELEM.

Kondisi: bekas, Used vacuum disc rotary evaporator Alfa Laval "Centritherm" model CT-6. Maximum evaporated water capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. Centritherm CT-6 disc vacuum evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger model P2-HL 3. Control panel Itjdpfslc Dwvex Aa Nsb 4. Feed pump 5. Concentrate pump 6. Condensate pump 7. Vacuum pump 8. Interconnecting piping 9. Mounting fixtures for plate and drum disassembly

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters Itjdpfx Aaeul Efms Njb - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: baik (bekas), Tahun pembuatan: 2002, de Itjdpfx Aotwpamsa Nsb