Crankshaft diproduksi oleh NAXOS UNION

NAXOS-UNION KR 1250 / 5000

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 15 rpm, lebar meja: 1.200 mm, panjang meja: 6.000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2006 Capabilities / Travel ranges: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Transverse (Z): 1,000 mm Clamping table: Length: 6,000 mm Fjdoy Tkgbepfx Alyogf Width: 1,200 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Distance between slots: 100 mm Max. workpiece weight: 13,500 kg NC rotary table: Position: Right side, flush-mounted into table surface Clamping surface: Ø 1,000 mm Positioning accuracy: 360 x 0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Distance between T-slots: 100 mm Paint finish: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle, 28 kW Spindle speed range: Spindle speed: 15 - 5,000 rpm Torque: 815 Nm Feed rates: X, Y, and Z axes: 2 – 10,000 mm/min Max. rapid traverse: X, Y, and Z axes: 25,000 mm/min Max. feed force: 10,000 N Base area FLC6000: approx. 11.0 x 5.6 m Overall height: approx. 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (through spindle coolant) RepairFIT is our proven solution for a cost-effective entry into our product lines. The machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (deep-dive check) by us. After intensive cleaning, all identified defects and faults are professionally repaired by our qualified service team.

Kondisi: bekas, Tahun pembuatan: 1992, Panjang penggerindaan 0800 mm Lebar penggerindaan 500 mm Tinggi benda kerja 400 mm Ukuran meja 800 x 400 mm Kecepatan meja 1 - 25 m/menit Gerak silang otomatis 0 - 60 mm/langkah Ukuran batu gerinda 400 x 100 x 127 mm Kecepatan putar spindle gerinda 1400/2800 rpm Kebutuhan daya total 10 kW Tegangan 380 V Fedpfjwgnz Aox Alyogf Berat mesin sekitar 6 ton Mesin dilengkapi dengan sistem pendingin cairan, pengumpanan vertikal otomatis, alat penyesuaian, dan dudukan batu gerinda. Sistem kontrol tidak dapat diandalkan karena usia!

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Fedpfx Aljt Hw Rdeyjgf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Fgodpfoyuzg Hex Alyjf Model: DMF 220 linear Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology 5-axis simultaneous operation available

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 300 mm, lubang spindel: 100 mm, diameter pembubutan di atas alas geser: 500 mm, tinggi pusat: 250 mm, lebar di tengah: 400 mm, panjang pembubutan: 2.000 mm, jarak gerak quill: 230 mm, panjang total: 3.600 mm, lebar total: 1.250 mm, tinggi total: 1.400 mm, kecepatan spindel (maks.): 1.400 rpm, langkah ulir metrik: 120, berat keseluruhan: 3.100 kg, diameter chuck tiga rahang: 315 mm, Menawarkan mesin bubut paralel tradisional bekas Sibimex CU500MT dalam kondisi sangat baik, ideal untuk bengkel mekanik, pemeliharaan industri, pekerjaan konstruksi logam, dan pengerjaan presisi. Fgodpfsym Ut Djx Alyef Mesin kokoh, andal, dan selalu dirawat dengan baik. Struktur cor besi yang kuat, pergerakan halus, dan mekanis yang presisi. Pilihan sempurna bagi yang membutuhkan solusi siap pakai tanpa harus berinvestasi pada mesin baru. Keunggulan * kondisi umum sangat baik * mekanis presisi dan andal * siap langsung digunakan * ideal untuk pengerjaan as, flange, bushing, dan komponen satuan * sempurna untuk produksi kecil dan menengah atau pemeliharaan Mesin berfungsi normal dan dapat dilihat dengan perjanjian. Tidak memerlukan perbaikan mendesak. Uji coba di lokasi memungkinkan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Gear Hobber ZFWZ 6300x40 Produsen: WMW-MODUL Model: ZFWZ 6300x40/1 Tahun Pembuatan: 1970 Diameter roda maks.: 7100 mm Lebar roda gigi: 1500 mm Modul maks.: 45 Diameter meja: 5300 mm Diameter x lebar cutter: 400x500 mm Sudut heliks maks.: 45 derajat Diameter hob: 500 mm Kecepatan putar hob: 9-63 rpm Kebutuhan daya total: 47 kW Berat mesin: 160 ton Dilengkapi dengan kepala hob standar, kepala hob tangensial, kepala milling bagian dalam, roda gigi pengganti, penyangga. Video tersedia. Fgsdpfx Aljxln Iweyof

Kondisi: bekas, Grinding length: 1000 mm Fodeu Dn Txspfx Alyegf Grinding width: 300 mm Workpiece height: 230 mm Table clamping surface: 1000 x 240 mm X-axis travel: 1000 mm Y-axis travel: 270 mm Z-axis travel: 350 mm Grinding wheel diameter: 240 mm Grinding spindle speed: 2,180 rpm Table speed, infinitely variable: 3 – 30 m/min Total power requirement: 4.5 kW Machine weight approx.: 2.8 t Machine dimensions (L x W x H): 2.36 x 1.37 x 2.0 m Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding device

Kondisi: bekas, Tahun pembuatan: 2005, - Fagor 8055 CNC control - Additional tank for through-spindle cooling (15 bar) 400 liters Fedpfx Alstvf Htjyogf - Year of manufacture: 2005 Technical specifications: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Max. table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Fgsdpfsrfx Utsx Alyof Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, panjang pembubutan: 8.000 mm, diameter pembubutan di atas alas geser: 2.000 mm, berat benda kerja (maks.): 25.000 kg, diameter pembubutan di atas carriage atas: 1.550 mm, de2hu2it2lt20240615A Fsdpfx Alexxxbzjyegf