Mesin EDM tipe celup

OPS INGERSOLL Gantry Eagle 800

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been thoroughly and professionally overhauled in-house and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced where necessary; this included, among others, ball rollers and drive spindles. The machine then underwent a comprehensive geometric measurement, alignment, and additional verification using a laser measuring system. Pgsdpfx Asyr I Aiobxsi The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic hoses, was completely replaced. In addition, the machine has been completely repainted and presents itself visually in an excellent and well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to a comprehensive EDM test in accordance with OPS Ingersoll’s quality and testing standards. The machine is immediately ready for use and is ideal for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Die-sinking EDM machine OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2008 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld – multifunctional hand control unit Manual EDM operation with Powertec handheld High Speed Jump max. 18 m/min Generator power: 60 Amps, EAGLE Powertec Travel (X, Y, Z): 550 x 850 x 450 mm Electrode changer: 20-position pick-up carousel changer Work tank (W x D x H): 800 x 1100 x 480 mm Worktable (W x D): 760 x 1000 mm Load capacity: 2,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filtration system Special features: Linear measuring system on all axes (Z-axis standard in series)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 2.000 kg, lebar meja: 760 mm, tabel jarak ke spindel: 585 mm, panjang meja: 1.000 mm, panjang benda kerja (maks.): 1.095 mm, lebar benda kerja (maks.): 795 mm, tinggi benda kerja (maks.): 480 mm, berat keseluruhan: 6.800 kg, tahun perombakan terakhir: 2025, beban meja: 2.000 kg, pergerakan cepat sumbu Z: 18 m/menit, Perlengkapan: dokumentasi / manual, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation Psdpfx Aboyrqprsxegi MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional remote control unit Manual eroding with Powertec Handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min Travel paths (X, Y, Z): 550 x 850 x 450 mm Table to electrode holder distance: min. 135 mm / max. 585 mm 20-position rotary magazine for electrodes Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filtration system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (per customer request) ECOTEC energy-saving standby function for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been thoroughly and professionally overhauled in-house and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced where necessary; this included, among others, ball rollers and drive spindles. The machine then underwent a comprehensive geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic hoses, was completely replaced. In addition, the machine has been completely repainted and presents itself visually in an excellent and well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to a comprehensive EDM test in accordance with OPS Ingersoll’s quality and testing standards. The machine is immediately ready for use and is ideal for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Die-sinking EDM machine OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2008 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld – multifunctional hand control unit Manual EDM operation with Powertec handheld High Speed Jump max. 18 m/min Generator power: 60 Amps, EAGLE Powertec Travel (X, Y, Z): 550 x 850 x 450 mm Pedpfjykn Ngex Abxegi Electrode changer: 20-position pick-up carousel changer Work tank (W x D x H): 800 x 1100 x 480 mm Worktable (W x D): 760 x 1000 mm Load capacity: 2,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filtration system Special features: Linear measuring system on all axes (Z-axis standard in series)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 2.000 kg, lebar meja: 760 mm, tabel jarak ke spindel: 585 mm, panjang meja: 1.000 mm, panjang benda kerja (maks.): 1.095 mm, lebar benda kerja (maks.): 795 mm, tinggi benda kerja (maks.): 480 mm, berat keseluruhan: 6.800 kg, tahun perombakan terakhir: 2025, beban meja: 2.000 kg, pergerakan cepat sumbu Z: 18 m/menit, Perlengkapan: dokumentasi / manual, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional remote control unit Manual eroding with Powertec Handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min Travel paths (X, Y, Z): 550 x 850 x 450 mm Table to electrode holder distance: min. 135 mm / max. 585 mm 20-position rotary magazine for electrodes Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Podpfeyi Uaisx Abxegi Integrated cartridge filtration system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (per customer request) ECOTEC energy-saving standby function for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, OPS Ingersoll Gantry Eagle 800 Tahun pembuatan: 2011 Jam kerja: 1703 Kontrol Eagle Powertec Pgedjxiwz Ujpfx Abxei X,Y,Z: 550 x 850 x 450 mm Meja penjepit: 760 x 1000 mm Berat maksimum: 2000 kg Holder EROWA Bak kerja bisa direndam Sumbu C Pendingin cairan (chiller) Sistem pemadam kebakaran Remote control Penukar elektroda 20 posisi Generator 60 ampere Termasuk dielektrikum (+/- 700 liter) Termasuk probe dengan probe di tempat tidur mesin termasuk magnet 400 x 200 mm termasuk lemari dengan aksesoris termasuk dokumentasi Mesin dalam kondisi aktif untuk inspeksi