Mesin bor dan penggilingan

Optimum MB 4 PV

Kondisi: baru, Tahun pembuatan: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece leveling plate set - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy-duty, robust cast-iron construction High running smoothness due to precision-ground, oil-bath lubricated gearbox gears Forward/reverse operation Automatic quill feed with manual fine feed Motorized Z-axis positioning Motorized X-axis table feed Coolant system Machine lamp Gear head swivels ±45° Massive hand-scraped dovetail column guide for maximum stability and highest precision Height-adjustable, large protective screen with micro switch Drilling depth stop Digital position display DRO 5 Drilling/tapping mode Heavy-duty, large cross table, precision-machined surface with T-slots and adjustable gib strips Solid cast-iron machine base with chip tray Single-stage quality industrial motor Wide speed range from 60 to 2,760 rpm via 2 steplessly adjustable speeds SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling-milling head: Drilling-milling head swivel range ±45° Drilling and milling capacity: Max. face mill diameter 63 mm Max. end mill diameter 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data: Drive motor power 1.5 kW Connection voltage 400 V Mains frequency 50 Hz Horizontal milling table: Length 800 mm Width 240 mm Vertical spindle to table distance max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Coolant system: Coolant pump output 100 W Standards and certifications: Standard DIN EN 55011 EMC class C2 Travel: X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle: Bwjdpfxeyxyivj Am Iol Throat 258 mm Spindle taper MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control electronic Drawbar M16 Quill diameter 75 mm Quill stroke 120 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 540 mm, jarak lintasan sumbu Y: 240 mm, kecepatan spindel (maks.): 1.650 rpm, kecepatan spindel (min.): 45 rpm, penjepit spindle: MK 4, kedalaman tenggorokan: 350 mm, gores kuas bulu: 130 mm, panjang total: 1.250 mm, tinggi total: 1.900 mm, lebar meja: 225 mm, lebar total: 1.100 mm, panjang meja: 800 mm, kapasitas pengeboran: 40 mm, hidung spindel: MK-4, daya nominal: 2,2 kW (2,99 hp), Drilling/milling machine, drilling capacity Ø 40 mm, 2-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm stepless via variator, MK 4, machine lamp, motorized table elevation, automatic feed, fine adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg Bodpfx Aowt Swzsm Iswl

Kondisi: baru, Center distance ----- 1000 mm Center height ----- 230 mm Bwsdjk Iug Tjpfx Am Iol Swing diameter ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post, type Multifix TOOB2 with 4 holders * 3-jaw self-centering chuck 250 mm * 4-jaw independent chuck 320 mm * Faceplate 350 mm * Fixed and traveling steady rest * LED work light and coolant system * Electric brake (CE) * Foot brake * Box with various tools

Kondisi: baru, Tahun pembuatan: 2026, The ZX7045 B1 DRO milling-drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for screws up to M12 mm. With a milling capacity of up to 80 mm (width) and keyway cutting up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features an automatic spindle feed, increasing work efficiency. Additionally, it is equipped with a digital readout for enhanced precision and a coolant system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals who demand high quality and performance in metalworking. Product Features: - HEAVY-DUTY, STABLE CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTARY HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Base available as an optional accessory TECHNICAL DATA: - DRILLING CAPACITY IN STEEL: 32 mm - DRILLING CAPACITY IN CAST IRON: 45 mm - FACE MILLING CUTTER DIAMETER: 80 mm - END MILL DIAMETER: 28 mm - SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) - SPINDLE TAPER: MT 4 - SPINDLE STROKE (AUTOMATIC FEED): 125 mm - WORK TABLE DIMENSIONS: 820 mm x 240 mm - BASE DIMENSIONS: 580 x 600 mm - MAX. DISTANCE SPINDLE TO TABLE: 445 mm - DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm - TRAVEL X/Y/Z: 515/175/430 mm - QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev - HEAD ROTATION LEFT/RIGHT: 90° - MOTOR POWER: 1.8 kW (2.5 HP) - POWER SUPPLY: 400 V - WEIGHT: 350 kg Available Accessories: - MK4/B18 drill chuck arbor Bwedpfx Asud H H Usm Isl - Digital readout - Service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Bodpfxjhpktvs Am Iewl Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Tahun pembuatan: 2022, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 15 m/menit, berat keseluruhan: 7.400 kg, kecepatan spindel (min.): 4.000 rpm, kecepatan spindel (maks.): 10 rpm, jarak lintasan sumbu Y: 1.500 mm, daya: 22 kW (29,91 hp), DYAS Plattenbohrzentrum - DYAS PDC-1500 Anzahl Bohraggregate: 1 Vertikal Motorleistung: 22 kW Spindelmoment: 280 Nm Spindeldrehzahl: 10–4000 U/min Automatischer Werkzeugwechsler (ATC): 16 Plätze Max. Werkstückgewicht: 760 kg Max. Bohrdurchmesser: Ø40 mm Bsdsgbfaxjpfx Am Iewl

Kondisi: bekas, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Required space approx.: 1.8 x 1.2 x 0.4 m Bodpfx Ascxxu Dom Iewl - Measuring plate with 5 special feet - Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis 110 mm Travel of machine head 450 mm Bedpfxowkrp Ee Am Iowl Table to spindle nose 0 – 527 mm Quick-change system SF 32 Work spindle 2.9 kW Steplessly adjustable speed range 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirement (W x D x H) 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 051888, Used automatic circular saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Head rotation mechanism for angled cuts up to 45° to the left with locking lever. Bjdpfx Amerfw Iks Ijwl Removable pneumatic anti-burr vice. Pneumatic cylinder for feed movement, with speed adjustment brake. Transmission with dual adjustable-pulley system for variable speed from 15 to 90 m/s. Tilting head mounted on adjustable self-lubricating bushings. Feed stroke of 600 mm, controlled by pneumatic cylinder. Repeatable up to a maximum of 9 strokes for a total travel of 5400 mm. Maximum feeder vice opening: 160 mm. Programmable piece counter. Minimum final cut waste: 160 mm. Feeder speed control valve. Ammeter. Reverse function. Emergency stop button and lockable switch on control panel. Blade lubrication and cooling system with electric pump. Coolant tank with removable pump for easy cleaning. Fully enclosed guard designed for quick blade replacement. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three-phase, 380V Dimensions: 1300 x 1350 x 1600 mm Working height: 950 mm Weight: 420 kg

Kondisi: baru, Modern, precise pillar drilling machine designed according to the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and standard chip breaking control. The digital display shows feed rate, spindle speed, and drilling depth. Equipped with a reversing switch for clockwise/anticlockwise rotation and emergency stop button. Full motor protection included. Pre-configured machine with special equipment: thread cutting unit, retract function, and LED lamp. Standard drilling capacity in E 335: 30 mm Thread cutting capacity: M 20 Spindle: MT 3 Continuously adjustable feed rate: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Two-speed motor: 0.8/1.5 kW Infinitely variable spindle speeds Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - 3,200 rpm Pre-configured machine including special features: Bodjf Ey Auepfx Am Iswl - Thread cutting unit - Retract function - LED lamp