Gulungan membungkuk mesin - 3 gulungan

OSTAS 1070 x 130 OMR-S

Kondisi: baru, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg / piece Rotational speed: 22 rpm Filling level: 40-50% Colour: Blue, RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Hexagonal drum lined with 36 mm abrasion-resistant, vulcanised rubber, shutter for protection against the rotating container, robust design, easy to operate. Control panel with timer, hour counter, main switch, emergency stop and signal light. The maximum filling level is 40% of the container volume and corresponds to 300 kg, consisting of 200 kg of workpieces plus 100 kg of deburring media = high-manganese steel balls or cast iron pentagons. These are available from Sideros: high-manganese steel balls per 100 kg €400, cast iron pentagons per 100 kg €950. Dust extraction unit Sideros ECO A (Photo 8) available for a surcharge of €1,900 plus VAT. The manufacturer recommends sending approx. 100 kg of sample parts for testing to the factory in Italy before placing an order, in order to ensure optimal deburring results. Otherwise, the manufacturer does not assume responsibility for the deburring result. Warranty: 12 months for single-shift operation. In case of spare part shipment, defective parts must be returned. Machine downtimes are not covered. Lodpju Uu T Rjfx Ac Hehc STOCKING DEALER WITH 1,600 m² SHOWROOM.

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Ljdpfoihpn Nox Ac Hohc Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools Lsdehgihkspfx Ac Hehc - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: baru, de-001 Lhodpfx Acsd Eqqqe Hec

Kondisi: bekas, Tahun pembuatan: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Ljdpfx Asg Ip Efjc Hjhc Required space approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Ljdped Ev Upsfx Ac Hshc Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 47.000 h, daya laser: 2.000 W, gaya punching: 76 t, berat benda kerja (maks.): 120 kg, jangkauan kerja: 2.500 mm, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, Special equipment: + Thread forming function with thread former breakage monitoring + MultiTool function + Marking/Fast Beading function + Secondary ram + Sensor for parts chute Standard equipment: - Robust C-frame - Coordinate guidance with integrated linear magazine - 21 tool and clamp positions - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head Lhodpowcq Hgofx Ac Hsc - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact extraction system - Rotatable tool holder - Automatic secondary ram with hold-down device - Automatic parts chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Punch spray lubrication - Second lubricant container - Scrap slug extraction - Chip bucket - Hydraulic quick disconnect - External control panel - 15" TFT color touchscreen - USB stick interface - 3.5" floppy disk drive - Safety devices - RJ45 network port - Network connectivity - Detailed operating instructions - Remote diagnostics system

Kondisi: bekas, Tahun pembuatan: 2016, Machine operating hours: 5320 h Maximum pass-through width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0–2 m/min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard equipment: Lhsdpsv N I Hlefx Ac Hjc - Equipped with vacuum table for processing steel, stainless steel, and aluminium parts in sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, even parts with an edge length over 200 mm can be processed on one side - High level of automation enables economical and reliable processing even for large quantities - High and consistent processing quality - Dry processing (no chemical additives required as with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking distances for the operator - Energy-efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment: Lissmac DDE 1500 extraction unit

Kondisi: baru, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end bearing Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2,150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm Ljdpfxjiffwqo Ac Hshc All bending capacities are calculated based on a yield strength of 250 N/mm² Material: (ST 37 - ST 42 construction steel)

Kondisi: baru, Tahun pembuatan: 2025, de Lhodpfx Acehv U U De Hjc