Pukulan lubang

Peddinghaus 225B/45

Kondisi: baik (bekas), nomor mesin/kendaraan: 550C08, A used punching machine PEDDINGHAUS with large throat depth and spacious support table with stops Punching force: 45 tons Strokes: 40 strokes/min Lrjdpfx Aled Hxrtokok Throat depth: 762 mm Working height: 1110 mm

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Lrodpfxog Tzbhj Alkjk Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW Lodpfjlnkc Uex Alksrk - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Lodpsvprv Rofx Alksrk Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, The machine has very few operating hours and has been in storage for many years. Capabilities: - Hole diameter and thickness up to max.: approx. 28×13 mm - Angle steel at 90 degrees up to max.: 80x80x8 mm - Angle 100x100x10 mm - Flat steel up to max.: 300x10 / 200×13 mm (See also the performance plate in the attachment). Lrodpfx Aljupzf Rekjk Machine weight: approx. 750 kg Various punches are included with the machine.

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This state-of-the-art CNC-controlled notching system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location in the machine using a pulling gripper carriage along the roller conveyor. A robotic arm fitted with cutting units (oxy-fuel or plasma) performs the cuts or notching operations at the selected position. The cut or notched, finished components either drop into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 beam notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD serves as the plasma power source, suitable for material thicknesses up to 32 mm. Thicker material sections or phase cuts over 32 mm are handled by the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain-drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. The profiles are then moved into the machine on a sturdy roller conveyor with a gripper carriage. The system is designed for profiles up to 12 m long and therefore features 12 m roller conveyors on both the infeed and outfeed sides, each with a roller conveyor width of 1,300 mm. For removal of finished parts on the outfeed side, there are four chain-drag transverse conveyors each 6,450 mm long located after the notching system. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC controller from Mitrol. The reliable CNC control unit is produced by Ficep's in-house supplier Mitrol and operates with Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit: Lodpfxotwm Ubj Alksrk The extraction filter unit is from Donaldson Torit DCE. Safety: Perimeter fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Kondisi: bekas, nomor mesin/kendaraan: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110 x 10 mm Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device (L and T steel): 80 x 10 mm Ledpocxxrpjfx Alksrk Punching unit: Pressing force: 50 t Stroke: 27 mm Punching unit: Capacity (diameter x thickness): 25 x 16 mm / 20 x 19 mm Machine weight approx.: 1.6 t Required space approx.: 1.6 x 0.85 x 1.8 m

Kondisi: bekas, Tahun pembuatan: 2001, tr-d2fb06f8 Lrodjlug Tuepfx Alkjk

Kondisi: bekas, panjang total: 1.800 mm, lebar total: 1.000 mm, tinggi total: 2.000 mm, Net weight: 2,000 kg Thickness: 45 mm Maximum force: 70 tons Punching and Shearing Machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Capacity: 70 tons Punching round: 45 mm Shearing blade: 45 mm Sheet cutting: 450 x 15 mm Notching corners: 250 x 6 mm Including several punches Machine dimensions: 1800 x 1000 x 2000 mm Machine weight: 2,000 kg - Documentation available: No - CE certificate available: No - Drive: Hydraulic - Punching force [t]: 70 - Notch width [mm]: 250 - Max. notching sheet thickness [mm]: 6 - Round material cutting capacity [mm]: 45 Lredpew Ryxmsfx Alkjk - Cutting width [mm]: 450 - Max. sheet thickness cutting [mm]: 15 - Transport dimensions: 1800 mm x 1000 mm x 2000 mm (L x W x H) - Transport weight [kg]: 2000 kg Financial Information VAT: The stated price is subject to VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Kondisi: baik (bekas), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Drill spindle taper: MK 6 Drill spindle stroke: 390 mm Spindle speeds: 24 steps, 20 - 1400 rpm Right- and left-hand rotation Feed, 12 steps: 0.045 - 1.5 mm/rev Drive: 400 V / 14.5 kVA Electromechanical clamping of arm and drilling unit Distance from machined machine bed to drill quill: min. approx. 400 mm Lrjdpstzctmjfx Alkek max. approx. 1800 mm Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8,500 kg