Mesin pelubang kertas

Peddinghaus Blaue Serie

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: Bledpfxjfxyhfo Aa Ued The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: siap digunakan (bekas), Daya kerja: 300 kN/30 t Tinggi alat: 200 mm Panjang langkah: 0 - 300 mm Kapasitas tekuk dengan alat prisma MW 125/240: 200 x 16/200 x 24 mm Kecepatan penekukan: 0 - 1,3 m/menit Bedpjx Apgcjfx Aa Usld Motor penggerak: 380 V, 5,5 kW Berat: 800 kg Kebutuhan ruang: 1250 x 820 x 1120 mm

Kondisi: siap digunakan (bekas), panjang total: 900 mm, lebar total: 400 mm, tinggi total: 1.100 mm, berat kosong: 140 kg, pipa gas: Ø50 x 3,91 mm pipa baja: Ø60 x 3 mm pipa baja tahan karat: Ø60 x 2 mm pipa tembaga/aluminium: Ø64 x 4 mm batang solid: Ø35 mm batang solid persegi panjang: 60 x 10 mm batang datar (keras): 60 x 16 mm batang datar (mudah dibengkokkan): 60 x 30 mm Bljdpfxsxllire Aa Ued profil kotak: 60 x 30 x 4 mm radius maksimum: 200 mm kecepatan pembengkokan: 1,25 - 2,5 rpm video klik di sini Daya motor: 1,5 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Voortman V613 / VB1050 Split-System CNC-Bohr-/Sägelinie – Baujahr 2012. Drehbare Spindel. Automatischer Werkzeugwechsler. 24 Meter Einlauf zum VB1050. Bodpfx Aasv U Ea Ho Uold 24 Meter Auslauf zur V613 CNC-Bohrlinie. 24 Meter Auslauf. Rollenförderer. VACAM CNC-Steuerung. Kurzstückausschleusung.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of pipe geometries with bending radii from 1.5 x D → Maximum bending capacity for pipes: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for pipes: 30 x 30 x 3 mm → Maximum bending capacity for pipes: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW → Pipe feed length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display enables easy and intuitive programming and operation of the machine. After the pipe is fed in, it is clamped in the carriage by the chuck, allowing for precise positioning of the pipe and, thus, the creation of dimensionally accurate geometries. The standard configuration also includes pipe geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not allow operation. This eliminates operator errors. Optional additional features provide increased convenience and boost the output and efficiency of the system. Data exchange with the optional TBS-3D pipe calculation program (PC version) is handled via USB stick or network. Existing pipe geometries can be imported using the software. Bsdjtr U Hlspfx Aa Ueld Standard equipment: → Servo drive for the bending axis 1.5 kW → Adjustable speed → Left-hand bending direction → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic pipe clamping with adjustable clamping pressure → Programmable mandrel pre-retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control system calculates feed values and bending angles immediately upon input of length and angle. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Tahun pembuatan: 2013, Kondisi: baik (bekas), Plasma cutting and extraction table, dimensions 2,500 x 6,000 mm. Gantry bridge. Carriage with servo drives (for positioning the gantry bridge in the X-direction). Machine track, length 8 m. HEB450 profiles for the machine track foundation, 8 m. Plasma cutting unit Hypertherm HPR 400XD, 1 unit. Plasma bevel cutting unit including automatic torch height control system. Fume extraction unit Filtercube 4H for plasma cutting system. Oxy-fuel cutting torch, 3 units. Bodpfxjtp Dhpo Aa Ujld Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 units. Torch suspension for oxy-fuel torch (motor-driven). Torch suspension Single Drive for oxy-fuel torch, 2 units (with automatic torch positioning). Laser pointer (for torch alignment and positioning). Computer control system (consisting of an industrial PC and a control panel). Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support). Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel and accommodation expenses) and 1 day online support). Emergency stop with stop cord. Year of manufacture: 2013.

Kondisi: bekas, Tahun pembuatan: 1999, Sägeblattdurchmesser 275 mm Schnittbereich bei 90 Grad: rund 80 mm Schnittbereich bei 90 Grad: vierkant 70 mm Schnittbereich bei 90 Grad: flach 100 x 60 mm Schnittbereich bei 45 Grad: rund 70 mm Schnittbereich bei 45 Grad: vierkant 60 mm Schnittbereich bei 60 Grad: flach 80 x 50 mm Spannbereich 110 mm Drehzahl 45 / 90 U/min Gesamtleistungsbedarf 0,5 kW Maschinengewicht ca. 0,07 t Raumbedarf ca. 900 x 700 x 1600 m Manuelle Kaltkreissäge mit: - Maschinenuntergestell - Auflageschiene 1500mm Bodpfxsl R Nnno Aa Ueld

Kondisi: baik (bekas), Tahun pembuatan: 1998, Säulenschwenkkran, Hallenkran, Arbeitsplatzkran -Hersteller: VETTER, Säulenschwenkkran Typ TS10-7,0 Tragkraft 1000 kg -Bemerkung: mit Dokumentation -mit Kettenzug: Vetter Typ SIE 6F Baujahr 1998 -Hubgeschwindigkeit: 5,0/1,25 m/min -Fahrantrieb: ja -Schwenkantrieb: ja -Ausladung: 7020 mm -Gesamthöhe: 3870 mm -Hakenhöhe: 2960 mm -Schwenkbereich: 360° -Transport Abmessungen: 1460/7570/H2280 mm Blsdpsx R U Azsfx Aa Ujd -Eigengewicht: 1250 kg

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Blsdpfx Aaspug D Ej Uod Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kapasitas muatan per bagian penyimpanan: 15.003.000 kg, panjang total: 3.280 mm, tinggi total: 2.870 mm, lebar total: 3.300 mm, tinggi rak: 80 mm, masa garansi: 12 bulan, panjang rak: 1.540 mm, kapasitas angkut: 18.000 kg, kapasitas angkut per lengan kantilever: 15.003.000 kg, berat keseluruhan: 2.500 kg, beban per pasangan rangka atap (maks.): 3.000 kg, lebar rangka: 3.300 mm, jumlah baris rak: 10, Rak untuk lembaran logam / sistem pendukung penyimpanan baja dengan kapasitas tinggi Bljdexhd Tbjpfx Aa Uod Beban per rak: 2 rak bawah dengan kapasitas 3000 kg 8 rak dengan kapasitas 1500 kg Fitur utama: - Pintu rak dilengkapi dengan pengaman saat rak ditarik keluar; rak dapat dikunci pada posisi tertutup maupun terbuka. - Rel rangka dan pintu terhubung agar rak dapat digeser di atas roller secara penuh. - Rak dapat ditarik sepenuhnya 100% dari kedalamannya. Spesifikasi rak menunjukkan nilai spesifik, namun produk dapat disesuaikan dengan kebutuhan individu pelanggan.