Kontrol rak

Philips MAHO MH 800C

Kondisi: bekas, Control panel, touch screen, operator device, display, operator panel, PLC, Simatic Panel PC, touch screen, touchpanel, Simatic multi panel, touch multi panel, touch panel - Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C - Type: 1435-18-22 - Overall dimensions: 340/310/H30 mm - Weight: 0.8 kg Blodpsq T T Nwsfx Am Ieg

Kondisi: bekas, Tahun pembuatan: 1974, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross-slide: 300 mm Turning length: 2100 mm Distance between centers: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse X-axis: carriage 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g., metric, module, and inch threads Rapid traverse on cross-slide Chuck guard 2x chip trays Accessories: (see comparable on photo) 2x steady rests (1x closed, 1x open) Face plate 3-jaw chuck Jaw sets Flange Bodpou Ix Dcefx Am Ijlg Centers Various gears

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1–3000 mm/min Rapid traverse: 6 m/min Clamping surface of table: 1100 x 600 mm Table feed: 1–3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Bsdpfsu Nda Eex Am Ielg Equipment: - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system

Kondisi: bekas, ALZMETALL AB 3 ESV Column Drilling Machine Machine no.: 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Bsdjharwvopfx Am Ielg Spindle taper: MK 3 - short quill Distance spindle nose to table: 545 mm (short quill) Distance spindle adapter to table: 395 mm (Morse taper adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 2 gearbox stages, 2 motor speeds, and stepless via variator gearbox - Pre-stage for high torque at low speeds - Morse taper adapter from MK3 to MK4 - Automatic feed: 0.1 – 0.2 – 0.3 mm/rev - Rotatable drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg In good condition.

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Bsdpfx Amjt Hw S Ie Islg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.

Kondisi: baik (bekas), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete verification with a correct phone number and email address in order to submit an offer. DECKEL Milling Machine / Universal Tool Milling Machine – DMU 35 M 3-axis / 2-axis CNC milling machine Equipped with SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Pull stud: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal tilting/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary range: 360 degrees Swivel range: degrees Total power requirement: kVA Bjdpfoxz Rdajx Am Ielg Weight: approx. 1,750 kg Technical data not binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed cabin with sliding door - Swivelling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine mounts - Machine light - Interface: Serial RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out due to its versatility, featuring a manually operated rotary-swivel table that allows 5-sided machining. Condition: Good to very good, from a vocational training center, see pictures. Can be tested under power.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl Bljdpfx Asxu I Atom Isg

Kondisi: bekas, tinggi total: 2.000 mm, lebar total: 2.300 mm, panjang total: 3.000 mm, 0 Bodpswnif Ssfx Am Islg

Kondisi: bekas, Tahun pembuatan: 1987, Technical Details: X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table tilting +/-: A-axis: 20° / 60° Table rotation: B-axis: 360° Bljdpsu Idbyefx Am Isg Control: Maho 432 (3D path control) Max. milling capacity: ST: 60 mm and GG: 22 mm Tool magazine with: 24 positions Spindle speed range: 20 - 6300 rpm Max. table load: 200 kg Spindle taper: ISO 40 (hydraulic clamping) Spindle head swivelling left and right: 90° (manual) Quill stroke: 80 mm Feed rate range: X/Z: 1 - 3000, Y: 1 - 4000, B: 0.1 - 3000°/min. mm/min Rapid traverse: X/Z: 10, Y: 8, B: 20 rpm, m/min Control voltage: 110/220 V Total power requirement: approx. 20 kVA Machine weight approx.: 5.5 t Machine dimensions approx. LxWxH: 3.0 x 2.4 x 2.25 m Space requirement approx.: 5.2 x 5.0 x H: 2.3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-speed gearbox Work spindle can be pivoted out for horizontal spindle use Equipment: -Handheld control unit -Coolant system -Machine lighting

Kondisi: bekas, Tahun pembuatan: 2012, Hasegawa PM 150 CNC Machining Centre TECHNICAL SPECIFICATIONS Spindle Spindle taper: HSK-E32 Speed: 100 – 30,000 rpm Spindle motor: 3.0 / 4.5 kW Tool Changer Capacity: 10 Tool-to-tool change time: 1.8 sec Bedpfx Aeu E El Ijm Iolg Travel Axes X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° SCOPE OF DELIVERY Includes (non-exhaustive list): - Hasegawa PM 150 CNC Machining Centre - 10-position tool changer - Lehmann EA-507 rotary axis - Transformer - Fire suppression system - Complete operating documentation Exact scope of delivery as per photo series We do not assume liability for the accuracy, completeness or timeliness of the information provided.