Rak DC

Phoenix Contact Charx Power 30kW

Kondisi: bekas, Tahun pembuatan: 2004, e825f3d5 Dkodpfx Afjyyc Svewju

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 800 kg, lebar total: 600 mm, panjang total: 820 mm, tinggi total: 1.600 mm, tegangan masuk: 400 V, Used Liebert NX 40 kVA / 32 kW 3-phase UPS battery backup system (tested and with good batteries) Rated power: 0.8 PF: 40 kVA Output power: 32 kW Battery Battery type: VRLA 40x YUASA NPL24-12 | 12 V 24 Ah Width mm: 600 Depth mm: 825 Dedpot H Irljfx Afwsku Height mm: 1600 Weight (approx.) without battery: 341 kg Input parameters Rectifier type: IGBT-based vector-controlled PFC (power factor corrected) Input voltage to rectifier Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 3-wire Input voltage to bypass Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 4-wire (Ph+N) Permissible input voltage range for rectifier Vac: 305 to 477 Input frequency Hz: 50 or 60 Permissible input frequency range for rectifier Hz: 40 to 70 Input current THD at nominal voltage: < 3%* without filter Input power factor at nominal voltage: ≥ 0.99* without filter Flexi Power Walk-In seconds: 5 to 30 (selectable) Output parameters Inverter type: IGBT-based, vector, repetitive and PI-controlled Output power kW: 24 / 32 / 48 / 64 Output voltage Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 4-wire (Ph+N) Output voltage regulation: +/- 0.5% (3-phase RMS average) Output frequency Hz: 50 or 60 Output frequency regulation: +/- 0.05% Output voltage THD at nominal voltage: max. 1% Capability to handle high crest factor loads: 3:1 (in accordance with IEC 62040-3) Capability for step load handling: 0-100 or 100-0 Transient recovery ms: < 0.5 (recovery to 95% voltage level); 10 (recovery to 99% voltage level)

Kondisi: bekas, Tahun pembuatan: 2010, Mazak VCN 510C-II (Vertical Center Nexus) dengan kontrol Mazatrol Matrix Nexus, spindle BT40 12.000 RPM 18,5KW, dilengkapi tool setter dan konveyor serutan. Dijadwalkan tiba di Bristol pada Maret 2026, foto tambahan akan diunggah saat itu. Spesifikasi: Sistem Kontrol: Mazatrol Matrix Nexus Ukuran Meja: 1300 mm x 550 mm Djdpsyh N Aasfx Afwjku Beban Maksimum Meja: 1200 kg Perjalanan Sumbu X: 1050 mm Perjalanan Sumbu Y: 510 mm Perjalanan Sumbu Z: 510 mm Kecepatan Spindle: 12.000 RPM Taper Spindle: BT40 Daya Motor Spindle: 18,5 kW Kapasitas Penyimpanan Alat: 30 alat (Standar) Waktu Pergantian Alat (Chip-to-chip): Rapid Traverse (X/Y/Z): 36 m/menit Berat: ±6900 – 7100 kg Dimensi Mesin: 3870 x 2819 x 2842 mm Sistem Kontrol: Mazatrol Matrix Nexus Spesifikasi: X 1050 Y 510 Z 510 / 12.000 RPM / BT40 Aksesori: Tool setter dan konveyor serutan

Kondisi: bekas, Tahun pembuatan: 1995, Clamping force 2200 kN Clamping plate 755 x 755 mm Tie bar spacing 500 x 500 mm Dedpfxevxlufe Afwjku Machine weight approx. 8 t Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Mould height 250–600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Injection plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Corresponding parting surface 656, 846, 1078 cm² Decompression stroke 230 mm Used die casting machine DAW 200 S with Datavario control system for use with zinc alloys. Available upon agreement Recommendation from the manufacturer: a general overhaul at an authorized overhaul facility is advised. The scope of refurbishment can be agreed upon as required.

Kondisi: baru, Tahun pembuatan: 2025, Working area: 3048 x 1524 mm Overall machine dimensions: 4960 × 2280 × 2200 mm Laser output power: IPG 3000W / 2000W / 1500W X/Y-axis positioning accuracy: ±0.05 mm Dodpfx Aog Db Taofweku X/Y-axis repeat positioning accuracy: ±0.03 mm X/Y-axis max. rapid traverse speed: 100 m/min

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), de20240614a Dkjdpoxrf Nlefx Afwju

Kondisi: bekas, Power supply, converter, rectifier, power supply unit, Smart-UPS, replacement battery, UPS system - Delivery condition: as is, as inspected - Fault: L3 power module defective - Manufacturer: AdPoS, UPS system - Model: UPS Maxi-J F H 40 kVA - Dimensions: 825/440/H1270 mm Dsdpfx Afofngw Towjku - Weight: 154 kg

Kondisi: bekas, Tahun pembuatan: 2006, Tersedia kesempatan untuk membeli mesin pusat frais vertikal 3 sumbu Mazak dalam kondisi kerja yang baik. Siap dikirim segera. Pemeriksaan mesin dapat dilakukan dengan perjanjian terlebih dahulu. Dkedjzkwiuspfx Afwju Termasuk konveyor serpihan, pendingin 15 bar melalui spindel, probe pengukuran Renishaw, dan alat penyesuai pahat. Pengendali CNC: Mazatrol PC Fusion CNC 640 M Nexus Ukuran Meja (Permukaan Penjepit): 550 x 1300 mm Beban Meja Maksimum: 1200 kg Jumlah Slot-T: 5 Jarak Slot-T: 100 mm Lebar Slot: 18 mm Kecepatan Gerak Cepat: 36000 mm/menit Rentang Kecepatan Spindel: 40 – 12.000 rpm Laju Pemakanan Pemotongan: 1 – 8.000 mm/menit Batang Pahat: MAS BT-40 Posisi Pahat: 30 Diameter Pahat Maks.: 80 mm Panjang Pahat Maks.: 350 mm Berat Pahat Maks.: 8 kg Konveyor Serpihan: ya Berat Mesin: 7100 kg

Kondisi: bekas, Tahun pembuatan: 1999, Clamping force: 3150 kN Clamping plate: 900x900 mm Tie bar distance: 550x550 mm Machine weight approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Dkjdpfx Aevfhrtjfweu Mould height: 300-700 mm Tie bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection piston diameter: 70, 80, 90, 100 mm Injection volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Release stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system for processing magnesium alloys. Available from used machinery stock. The machine is equipped with an electric furnace from Rauch, type MMO 315E. No spraying device included. Manufacturer recommends repair/overhaul at the reconditioning plant; scope of work can be determined by mutual agreement.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 20.317 h, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, lebar total: 1.630 mm, tinggi total: 1.920 mm, berat keseluruhan: 4.350 kg, produsen pengendali: FANUC, model controller: Series 160i-8, panjang produk (maks.): 4.900 mm, jumlah sumbu: 8, en Dksdpjy E Nq Aofx Afwou